Mada za sehemu hiiHandling workshop equipmentMada 2
- Classifying equipment
- Maintaining workshop equipment
Maintaining workshop equipment means regularly checking, cleaning, and servicing tools and machines so they stay safe and work properly. Good maintenance prevents accidents, extends the life of equipment, and saves money on repairs.
Maintenance refers to activities like inspecting, testing, measuring, replacing parts, and adjusting tools and equipment. It helps reduce workplace hazards and keeps working conditions safe. When equipment is not maintained properly, it can cause serious injuries or health problems.
Before maintaining any equipment, always follow these safety rules:
- Turn off the power and make sure all switches read zero voltage before starting any work.
- Use proper Personal Protective Equipment (PPE) such as safety goggles, leather gloves, safety boots, helmet, mask, and ear muffs.
- Remove jewellery, metal watches, and loose clothing that could get caught in moving parts.
- Tie long hair back and avoid hanging accessories.
- Keep the work area clean and free of clutter.
- Never work alone when dealing with equipment above 50V.
1. Lubrication
Apply lubricants to moving parts according to the manufacturer's schedule. Lubricants reduce friction, keep parts moving smoothly, and protect against rust.
2. Inspection and Replacement
Check tools and defective equipment regularly. Replace worn-out or damaged tools following the manufacturer's guidelines.
3. Calibration
Measure and calibrate testing instruments according to the manufacturer's instructions to ensure accuracy.
4. Cleaning
Clean the workplace and keep it in a safe state. Use appropriate cleaning solvents for different types of dirt.
| Type | Main Uses |
|---|---|
| Anti-rust spray | Loosen rusted parts, protect metal, stop squeaks |
| Wire pulling lubricant | Lubricate wires without damaging insulation |
| All-purpose anti-rust | Anti-rust, lubricating, rust removal |
| Lubricant oil / engine oil | Lubricate gears, clean and protect moving parts |
| Silicon lubricant | Heat-stable lubrication, water repellent |
A good lubricant should have high boiling point, low freezing point, high viscosity index, thermal stability, and resistance to oxidation and corrosion.
Solvents are used to clean tools and equipment. They are classified as polar (soluble in water) and non-polar (insoluble in water).
| Solvent | Solubility | Common Use |
|---|---|---|
| Water | Soluble (polar) | Wash dust from floors and walls |
| Detergent soap | Soluble (polar) | Clean benches, tables, and cabinets |
| Gasoline | Insoluble (non-polar) | Wash greasy tools and equipment |
| Kerosene | Insoluble (non-polar) | Remove dust, grease, oil, and paint |
| Thinner | Insoluble (non-polar) | Remove spilled paint from floors, walls, and tools |
Worked Example: Suppose you need to clean a greasy screwdriver and a dusty workbench in your workshop at school. For the greasy screwdriver, you would use gasoline (a non-polar solvent that dissolves grease). For the dusty workbench, you would use water with detergent soap (polar solvents that wash away dust).
In Tanzania, electricians and technicians in workshops or small businesses regularly maintain equipment like generators, circuit breakers, and hand tools. For example, a technician at a garage in Arusha will apply oil to the garage's generator every month, clean electrical tools with kerosene to remove grease, and replace worn-out pliers to ensure safe operation — this prevents breakdowns and costly repairs while keeping the workplace safe for customers and workers.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Use equipment and safety gears.
- Maintain workshop equipment according to functions.
- Observe safety precautions.
- Clean equipment, safety gears and work place.
Tathmini ya matokeo
Workshop equipment maintained as per the manufacturer's manual.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to maintain workshop equipment.
Principles: The student should explain principles related to maintaining of equipment.
Theories: The student should explain: -
- Different types of workshop equipment.
- The importance of maintaining workshop equipment
Swali
What does the term 'maintenance' cover in a workshop setting?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado