Mada za sehemu hiiPerforming light level assessmentMada 2
- Designing lighting schemes
- Maintaining lighting system
Designing Lighting Schemes
A lighting scheme is a planned design that determines what type, number, and placement of light fixtures will be used in a space to provide adequate illumination. The goal is to create a lighting installation that meets the illumination needs of the area while being safe, energy-efficient, and cost-effective.
When planning a lighting installation, the following factors must be considered:
- Illumination level (Lux): The amount of light needed in a specific area. Different rooms require different light levels—for example, a classroom needs more light than a bedroom.
- Uniformity of light: Light should be evenly distributed throughout the space to avoid dark spots and shadows.
- Glare control: Light should not cause discomfort or reduce visibility. This is controlled by using diffusers, shades, or positioning lights correctly.
- Energy efficiency: Use energy-saving lamps such as LED or CFL bulbs instead of traditional incandescent bulbs.
- Type of tasks performed: Areas where detailed work is done need higher illumination levels than casual areas.
- Safety requirements: All installations must follow safety standards and use proper wiring and protective devices.
Follow these systematic steps to design an effective lighting scheme:
-
Assess the area: Measure the dimensions of the room (length, width, and height). Calculate the floor area in square meters.
-
Determine the required illumination level: Refer to standard illumination tables for different room types. For example:
- Classrooms: 300 lux
- Offices: 500 lux
- Living rooms: 150 lux
- Kitchens: 300 lux
-
Select the type of lighting: Choose appropriate light fixtures and bulbs based on the purpose of the room and energy considerations.
-
Calculate the number of luminaires (light fixtures): Use the lumen method to determine how many fixtures are needed.
-
Plan the layout: Decide where each fixture will be placed to achieve uniform distribution. Consider the mounting height and spacing between fixtures.
-
Verify the design: Check that the design meets the illumination requirements and makes economic sense.
The lumen method is a simple way to calculate how many light fixtures a room needs.
The formula is:
N=F×U×ME×A
Where:
- N = Number of luminaires (light fixtures) required
- E = Required illumination level (lux)
- A = Area of the room (m²)
- F = Luminous flux of one lamp (lumens)
- U = Utilization factor (typically 0.5 to 0.7)
- M = Maintenance factor (typically 0.8)
A classroom in Dodoma measures 8 meters by 6 meters. The required illumination level is 300 lux. Each LED tube light has a luminous flux of 1,600 lumens. The utilization factor is 0.6, and the maintenance factor is 0.8.
Step 1: Calculate the area of the classroom
A=8×6=48 m2
Step 2: Calculate the total luminous flux required
E×A=300×48=14,400 lumens
Step 3: Calculate the number of luminaires
N=1,600×0.6×0.814,400=76814,400=18.75
Round up to the nearest whole number:
N=19 LED tube lights
Therefore, the classroom requires 19 LED tube lights evenly distributed across the ceiling to achieve the required illumination level of 300 lux.
- Always use certified electrical equipment and fixtures.
- Ensure proper earthing (grounding) of all lighting circuits.
- Use appropriate circuit breakers or fuses to protect against overcurrent.
- Follow the Tanzania Bureau of Standards (TBS) regulations for electrical installations.
- Wear proper safety gear (insulated gloves, safety boots, helmet) when installing lighting fixtures.
In Tanzania, a shop owner in Arusha planning to open a new retail store would need to design a lighting scheme to ensure products are well-displayed and customers can see clearly. By using the lumen method, they can calculate exactly how many LED bulbs to purchase, avoiding both under-lighting (which makes the shop appear dim and uninviting) and over-lighting (which wastes electricity and increases monthly bills). For example, a 15m² shop needing 500 lux would require about 8 to 10 LED bulbs, helping the owner budget around TSh 150,000–200,000 for proper shop lighting that attracts customers and complies with local safety standards.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools, equipment, and safety gear.
- Interpret electrical drawing.
- Erect lighting structures.
- Erect specialised light fitting.
- Connect supply.
- Commission light system
- Observe safety precautions.
- Clean workplace.
Tathmini ya matokeo
Design of lighting schemes performed as per technical specifications and IEE regulations.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should be able to design lighting schemes.
Principles: The student should explain the principles relating to designing lighting schemes.
Theories: The student should describe:
- Sources of light.
- Glare.
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions, testing procedures, and I.E.E. regulations.
- Maintenance of lighting system
Swali
What is the main purpose of a lighting scheme in a building?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado