Mada za sehemu hiiCarrying out risk assessmentMada 3
- Performing risk assessment
- Controlling risk
- Managing safety gear
When we have identified hazards and assessed the risks in our workplace, the next critical step is to control those risks. Controlling risk means taking action to reduce the likelihood of harm occurring or to lessen the severity of harm if it does occur. In electrical installation work, controlling risk is not optional—it is a legal and moral responsibility to protect yourself, your workmates, and others from injury or death.
The goal of risk control is to bring the risk level to an acceptable or tolerable level. Even after risk assessment, if the risk remains too high, controls must be applied before work begins.
Risk controls are organized in a hierarchy—a ranked list from most effective to least effective. You should always try the methods at the top of the hierarchy first. Only move to lower-level methods when higher-level methods are not feasible.
1. Elimination
This is the most effective control. You remove the hazard completely so that no one can be harmed by it.
- Example: Before starting work, disconnect and lock out the electrical supply. The hazard of electric shock is eliminated.
2. Substitution
Replace the hazardous tool, material, or process with a less hazardous one.
- Example: Instead of using a solvent that produces toxic fumes, use a water-based cleaner. Or replace a 240V tool with a battery-powered tool that operates at a lower voltage.
3. Engineering Controls
Make physical changes to the workplace, tools, or equipment to isolate people from the hazard.
- Example: Install insulation on bare conductors, use residual current devices (RCDs) to cut off power quickly if a fault occurs, or build a barrier around a live work area.
4. Administrative Controls
Change how people work through rules, procedures, training, and signage.
- Example: Create a permit-to-work system for high-risk tasks, display warning signs near live circuits, schedule work when fewer people are present, or train workers on lockout/tagout procedures.
5. Personal Protective Equipment (PPE)
This is the last line of defense. PPE protects the worker but does not remove the hazard. It should only be used when higher-level controls are not practical.
- Required PPE in electrical work includes:
- Insulated gloves for handling live parts
- Safety boots with non-conductive soles
- Safety clear glasses to protect eyes from sparks
- Overalls to protect skin
- Ear plugs when working in noisy environments
- Face masks when working in dusty areas
Imagine you are installing new wiring in a residential building in Dar es Salaam. During risk assessment, you identified the following hazard:
Hazard: Risk of electric shock from accidentally touching exposed live conductors during installation.
Using the hierarchy of control, you would apply controls in this order:
-
Elimination: Switch off the main supply and lock it out before starting. Verify with a voltage tester that no voltage is present.
-
Substitution: Use battery-powered tools instead of mains-powered tools where possible.
-
Engineering: Install proper cable containment with covers, and use insulated tools rated for the voltage you are working with.
-
Administrative: Follow a safe work procedure that includes testing for voltage before every touch, displaying "DANGER—WORK IN PROGRESS" signs, and ensuring only trained personnel access the area.
-
PPE: Wear insulated gloves, safety boots, and safety glasses as additional protection.
Applying controls is not a one-time action. You must:
- Select the appropriate control based on the risk level and what is practical.
- Implement the control properly—ensure all workers understand and follow it.
- Provide training on how to use the control and why it is necessary.
- Maintain the control—check that equipment, tools, and safety devices are in good working condition. For example, test RCDs regularly and inspect insulation on tools.
- Monitor and review the control to ensure it remains effective. If an incident occurs or conditions change, reassess the control.
Controlling risk is the final and most important step in the safe work process. It turns the findings of risk assessment into practical actions that prevent accidents. In electrical installation, where hazards such as electric shock, burns, and falls are common, effective risk control saves lives.
Always remember: your safety and the safety of others depend on applying the right controls before, during, and after every electrical task.
Imagine you are helping an electrician in Arusha install a new ceiling fan in a customer's home. Before starting, you apply the hierarchy of control: first, you switch off the mains power and lock it out (elimination), then you use insulated tools (engineering control), follow proper switching-off procedures (administrative control), and finally wear rubber gloves and safety boots (PPE). These steps ensure that neither you nor the homeowner is at risk of electric shock during the installation.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret service manuals.
- Select tools and equipment.
- Supervise the practiceof safe workshop practices to protect yourself, others, and properties.
- React correctly and safely when faced with an emergency.
- Identify and apply correctly all emergency equipment and supplies.
- Make periodic inspections of the workshop area and all equipment, and prepare a report.
- Con duct safety training.
- Identify any safety hazard material.
- Handle hazardous materials correctly.
- Pre pare universal workshop colour codes and know what the colours represent.
- Be aware of the dangers of compressed air.
- Monitor good environmental practices.
- Clean tools and equipment.
Tathmini ya matokeo
Control risk carried out as per OSHA standard and automobile regulations.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to control risk.
Principles: The student should explain the principles related to the control of risk.
Theories: The student should explain how to:
- Carry out risk assessment.
- Conduct safety training.
- Inspect workshop areas, tools and equipment. Circumstantial Detailed knowledge about:
- Safety precautions while carrying out risk management.
- Safe handling of tools and equipment.
Swali
According to the hierarchy of control measures, which is the most effective method for controlling risk in electrical work?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado