Mada za sehemu hiiPerforming preventive maintenance of electrical toolsMada 3
- Maintaining workshop safety gear
- Maintaining electrical hand tools
- Maintaining measuring tools
Electrical hand tools are portable tools powered by electricity that electricians use to install, repair, and maintain electrical systems. Proper maintenance of these tools ensures they work safely, efficiently, and last longer, which is essential for any working electrician in Tanzania.
Electrical hand tools are portable devices that use electric power to perform tasks such as cutting, drilling, stripping wires, and tightening fasteners. Unlike fully industrial machines, these are designed to be held and operated by hand. Common examples include:
- Electric drills – for making holes in wood, metal, or walls
- Screwdrivers with power heads – for driving screws quickly
- Wire strippers – for removing insulation from electrical wires
- Pliers (insulated) – for gripping and cutting wires
- Heat guns – for shrinking cable sleeves and softening materials
Regular maintenance helps to:
- Prevent accidents caused by faulty insulation or damaged parts
- Ensure accurate and clean work results
- Extend the tool's service life
- Reduce repair or replacement costs
- Maintain the tool's performance and efficiency
1. Visual Inspection Before Use
Before using any electrical hand tool, always check:
- The power cord for cuts, cracks, or exposed wires
- The tool casing for cracks or damage
- The plug for bent pins or damage
- Any burning smell or unusual noise during operation
- The working parts (drill bits, blades, stripping blades) for wear or damage
2. Cleaning
After each use, clean the tool:
- Wipe the exterior with a clean, dry cloth to remove dust and debris
- Use a blower to remove dust from ventilation slots and motor housing
- Clean the working parts (such as drill bits or blades) with a wire brush if needed
- Never use water or liquids on electric tools – this can cause short circuits
3. Lubrication
Moving parts need lubrication to work smoothly:
- Apply a few drops of light machine oil to gears and bearings as recommended by the manufacturer
- Do not over-lubricate, as excess oil can attract dust and dirt
4. Checking and Replacing Parts
- Inspect brushes in motors (if accessible) and replace when worn
- Replace damaged or worn drill bits, blades, and cutting edges
- Ensure all screws and fasteners are tight
5. Storage
Proper storage protects tools from damage:
- Store in a clean, dry place away from moisture
- Use a toolbox or wall mount to prevent falling
- Keep power cords coiled neatly without sharp bends
- Keep tools out of reach of children
Electric Drill
- Clean dust from ventilation slots after heavy use
- Check the chuck (the part holding the drill bit) for tightness
- Replace worn drill bits promptly
- Test the trigger switch for smooth operation
Insulated Pliers and Screwdrivers
- Inspect the insulation covering for cracks, cuts, or wear
- Never use insulated tools if the insulation is damaged – this can cause electric shock
- Clean the gripping surfaces to maintain good hold
Wire Strippers
- Clean the stripping slots to remove residual insulation
- Check the adjustment mechanism works smoothly
- Oil the pivot point if the tool feels stiff
When maintaining electrical hand tools, always wear:
- Safety clear glasses – to protect eyes from flying debris
- Gloves – to protect hands from sharp edges and chemicals
- Over coat or apron – to protect clothing
Work in a well-ventilated area and use a waste bin for disposing of old parts, insulation scraps, and worn components.
Situation: Mwangaza, a Form 2 student at Mwenge Vocational Training Centre, needs to maintain the college's electric drill before a practical exercise.
Steps Mwangaza follows:
- Unplugs the drill and waits for it to cool down
- Visually inspects the power cord – finds no cuts or damage
- Checks the plug – pins are straight, casing is intact
- Cleans the exterior with a dry cloth and uses a blower to clear dust from ventilation slots
- Checks the drill bit – it is slightly dull, so he sharpens it using a proper tool
- Lubricates the chuck thread with a small amount of machine oil
- Tests the switch – it turns on and off smoothly
- Stores the drill in the toolbox, away from moisture
Result: The drill is safe and ready for the next practical session.
A maintenance schedule chart helps track when each tool was last serviced. For example:
| Tool | Last Serviced | Next Service | Condition |
|---|---|---|---|
| Electric Drill | 01/03/2024 | 01/06/2024 | Good |
| Wire Strippers | 15/02/2024 | 15/05/2024 | Good |
| Heat Gun | 20/01/2024 | 20/04/2024 | Fair |
Following a schedule ensures no tool is neglected and problems are caught early.
In Tanzania, a small electrical shop owner in Mwanza or Arusha uses electrical hand tools daily to repair appliances, install wiring in homes, and make custom electrical fittings. By regularly maintaining tools like drills, pliers, and wire strippers, the technician avoids sudden tool failures during a job, works safely around clients, and saves money that would otherwise be spent on expensive replacements or medical bills from accidents. For example, a well-maintained insulated screwdriver can prevent a dangerous electric shock when repairing a faulty switch in a customer's house, ensuring both the technician and the customer stay safe.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools.
- Interpret maintenance schedule chart.
- Identify faults.
- Observe safety precautions.
- Clean tools, equipment, machines, and workplace.
- Store tools and equipment.
Tathmini ya matokeo
Electrical hand tools are maintained as per the manufacturer’s specifications.
Tathmini ya maarifa
Knowledge evidence: Detailed Knowledge of:
Method used: The student should explain different ways of maintaining tools.
Principles: The student should explain the principles related to maintaining safety gear.
Theories: The student should explain how to maintain workshop safety gear.
Detailed knowledge about: Safety precautions to be observed while maintaining equipment/machines. Safe handling of tools and equipment.
Swali
Which of the following is the primary reason for maintaining electrical hand tools?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado