Mada za sehemu hiiConstructing ducts and trenchesMada 4
- Constructing under-floor ducting system
- Constructing underground ducting system
- Installing wall/under-wall bus-duct electrical riser
- Constructing cable trenches
An underground ducting system is a network of channels or pathways constructed beneath the ground surface to house, route, protect, and organize electrical cables. These ducts are typically made from rigid and durable materials such as concrete, steel, or fibre, which shield the cables from mechanical damage, moisture, soil pressure, and unauthorized access. Underground ducting is widely used for transmitting electrical power between different locations—such as from one compound to another—and for underground wiring in urban and industrial installations.
Underground ducting systems serve several important functions in electrical installations:
- Protection from damage: Shields cables from physical impact, excavation work, and environmental factors like moisture and temperature changes.
- Organized cable management: Provides a systematic pathway for multiple cables, making installation, inspection, and maintenance easier.
- Safety: Prevents unauthorized access to cables and reduces the risk of electrical hazards.
- Aesthetic appeal: Hides cables underground, improving the appearance of urban and industrial areas.
- Longer cable lifespan: By protecting cables from harsh conditions, underground ducts extend the operational life of the wiring system.
The choice of material depends on the application, environmental conditions, and budget. The common materials include:
- Concrete ducts: Made from precast or reinforced concrete. They offer high durability and resistance to external forces, making them suitable for heavy-duty applications.
- Steel ducts: Constructed from steel, often provided with movable outlets for flexible cable routing. They are strong but may require corrosion protection.
- Fibre ducts: Made from fibre materials. They are lightweight, durable, and offer good resistance to corrosion and chemicals.
The space factor is the ratio of the space occupied by cables to the total internal space of the duct. For underground ducts, the space factor should not exceed 35%. This is lower than other systems (such as trunking at 45% or cable trays at 50%) because the fully enclosed nature of ducts prevents airflow, which can lead to overheating if cables are overcrowded.
Example 2.3: Determining the Minimum Duct Size
An underground duct is to house three 50 mm² armoured cables. Calculate the minimum internal cross-sectional area required for the duct, given a space factor of 35%.
Solution
Total cable area = 3 × 50 = 150 mm²
Using the space factor formula: Duct internal area=Space factorTotal cable area Duct internal area=0.35150=428.57 mm2
Therefore, the duct must have an internal cross-sectional area of at least 429 mm².
The construction of an underground ducting system follows a systematic process:
1. Planning and Site Preparation
- Study the layout and wiring diagrams to understand the routes of the underground ducting system.
- Check the site for hazards such as unstable ground or underground utilities (water pipes, gas lines, telecommunication cables).
- Mark the work area clearly to prevent accidents.
2. Excavation
- Excavate the trench to the required depth (typically 600 mm to 1000 mm below ground level for standard installations).
- Ensure the trench has consistent depth and is properly levelled.
- Remove sharp objects and debris that could damage the ducts or cables.
3. Installing the Ducts
- Place the ducts in the trench, ensuring proper alignment and gradient for drainage if required.
- Join ducts using appropriate fittings and seal joints to prevent moisture ingress.
- Support the ducts at regular intervals to prevent sagging or movement.
4. Cable Installation (if required)
- Draw cables into the ducts using appropriate tools like fish tape or cable pulling socks.
- Ensure cables are not twisted or damaged during installation.
- Terminate cables properly at both ends using correct termination kits.
5. Backfilling
- Backfill the trench with suitable material (usually fine sand or soil free from stones) to protect the ducts.
- Compact the backfill in layers to prevent settlement.
6. Testing and Inspection
- Perform continuity tests and insulation resistance tests to verify correct installation.
- Conduct a visual inspection to ensure everything is properly in place.
- Document the installation for future reference.
Safety is paramount when constructing underground ducting systems. The following measures must be observed:
- Wear appropriate PPE: Safety boots, helmets, gloves, safety goggles, and overalls.
- Check the site for hazards: Identify unstable ground, underground utilities, or flammable materials.
- Ensure power is isolated: If working near existing electrical installations, confirm that power is switched off and locked out.
- Use correct tools: Ensure all tools are in good condition and suitable for the task.
- Maintain clear distances: Keep ducts and trenches away from other underground services like water pipes and communication lines.
- Support trenches properly: Prevent trench collapse by using shoring or trench boxes when working in deep excavations.
- Clean the work area: Keep the site tidy to avoid trips and falls.
Poor construction practices can lead to several issues:
- Water ingress: Poor sealing or misalignment allows moisture to enter, damaging cables over time.
- Cable damage: Sharp edges, inconsistent depth, or excessive pressure can harm cable insulation.
- Overheating: Exceeding the 35% space factor restricts heat dissipation, leading to cable failure.
- Difficult maintenance: Poorly constructed systems make future inspection and repair challenging.
Advantages
- Provides strong protection for cables against mechanical damage and environmental factors.
- Creates a neat and organized appearance by hiding cables underground.
- Allows for future expansion or addition of new cables.
- Reduces electromagnetic interference compared to overhead systems.
Disadvantages
- Expensive to install due to excavation and material costs.
- Requires skilled workers and careful planning.
- Fault finding and repair are difficult and time-consuming, often requiring excavation.
- Susceptible to damage from root intrusion or rodent attack if not properly sealed.
In Tanzania, underground ducting systems are commonly used in urban areas such as Dar es Salaam and Arusha, where electricity is distributed to commercial buildings, shopping malls, and residential estates. For example, when constructing a new market in Mwanza, electricians would install underground ducts to protect the wiring that supplies power to each stall, ensuring safety from rain, excavation work, and unauthorized tampering—important in a busy market environment where cables could otherwise be easily damaged.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select materials, equipment and tools for installing ducts and cable trenches.
- Interpret drawings.
- Prepare site for construction of underground ducts.
- Excavate site for underground ducts trench installation.
- Build ducts by concrete.
- Test ducts and cable trench as per technical specifications.
- Observe safety precautions.
- Clean the work area.
- Store tools, equipment and safety gear.
Tathmini ya matokeo
The underground ducting system conform to technical specifications and IEE Regulations.
Tathmini ya maarifa
Methods used: The student should explain how to construct the Underground Ducting System.
Principles: The student should explain the principles related to constructing the Underground Ducting System.
Theories: The student should explain:
- Types of ducts and their applications.
- The construction of the underground ducts.
- The advantage of underground ducts.
Detailed knowledge about:
- Safety measures while constructing the ducts and cable trench as per IEE Regulations.
- Hazards control
- Environmental safety Assessment guidance:
- Observation and conversation with the student while performing the task.
- Oral and written questions.
- Product/service assessment
Swali
What is the primary purpose of constructing an underground ducting system?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado