Mada za sehemu hiiPerforming bench drillingMada 3
- Drilling hole on a plate
- Countersinking a drilled hole
- Counterboring a drilled hole
Drilling is the process of making round holes in materials such as metal, wood, or plastic using a rotating cutting tool called a drill bit. In plumbing and pipe fitting, drilling holes on plates is an essential skill used to create openings for pipes, fittings, and fixtures during installation work.
Drilling is a machining process in which a drill bit is rotated and pressed against a material to create a cylindrical hole. The drill bit removes material as it cuts, forming a hole of specific diameter.
- Portable drilling machine (hand drill): A lightweight, handheld drill powered by electricity or battery, suitable for small tasks and working in tight spaces.
- Bench drilling machine (drill press): A stationary machine mounted on a workbench, providing more stability and accuracy for drilling precise holes.
For workshop tasks, the bench drilling machine is preferred because it holds the work piece steady and produces accurate, clean holes.
Drill bits come in different types for various materials:
- Twist drill bit: The most common type, with a helical shape, used for drilling metal, wood, and plastic.
- Flat drill bit (spade bit): Used for drilling large holes in wood.
- Masonry drill bit: Designed for drilling into brick and concrete.
For drilling holes on metal plates, the twist drill bit is the correct choice.
- Drill machine (bench or portable)
- Drill bit (appropriate size for the hole required)
- Work piece (metal plate)
- Bench vice (to hold the plate firmly)
- Tape measure
- Punch or centre punch (to mark the hole position)
- Hammer
- Personal Protective Equipment (PPE): safety goggles, gloves, and safety shoes
-
Mark the hole position using a tape measure and a centre punch. Place the punch at the required position and strike it gently with a hammer to create a small indentation. This indentation guides the drill bit and prevents it from slipping.
-
Select the correct drill bit for the material and the required hole size. For a metal plate, choose a twist drill bit made of high-speed steel (HSS).
-
Secure the work piece in the bench vice. Position the plate so that the marked spot is clearly visible and the vice grips the plate firmly without damaging it.
-
Set the drill machine to the correct speed. For metal plates, use a slow to medium speed to prevent overheating the drill bit.
-
Put on PPE — wear safety goggles to protect your eyes from metal chips, and gloves for hand protection.
-
Start drilling by aligning the drill bit with the centre punch mark. Switch on the drill and apply gentle, steady pressure. Let the drill bit cut at its own pace; do not force it.
-
Withdraw the drill bit periodically to clear away metal chips (swarf) from the hole. This prevents the bit from getting stuck and ensures a clean hole.
-
Complete the hole by continuing to drill until the bit passes completely through the plate.
-
Switch off the drill and remove the plate from the vice. Use a file to smooth any rough edges around the hole.
A plumber needs to install a water pipe through a metal plate. The pipe has a diameter of 20 mm, so a hole of 22 mm is required to allow the pipe to pass through comfortably.
- Step 1: Measure and mark the centre of the hole position on the plate using a tape measure. Mark two reference lines crossing at the centre point.
- Step 2: Use a centre punch to create an indentation at the centre point.
- Step 3: Clamp the plate firmly in the bench vice.
- Step 4: Select a 22 mm twist drill bit and insert it into the drill chuck. Tighten securely.
- Step 5: Wear safety goggles and gloves.
- Step 6: Start the drill, align the bit with the punch mark, and drill through the plate.
- Step 7: Clear chips regularly and smooth the edges with a file when finished.
The result is a clean 22 mm hole through which the water pipe can be fitted.
- Always wear safety goggles to protect your eyes from flying metal chips.
- Secure the work piece firmly in the bench vice before drilling.
- Do not wear loose clothing or jewelry that could get caught in the drill.
- Keep hands away from the rotating drill bit.
- Switch off the drill machine when adjusting the work piece or changing drill bits.
In Tanzania, plumbers frequently use drilling skills when installing water supply systems in homes and buildings. For example, a plumber drilling a hole through a concrete wall to pass a 50 mm PVC water pipe from an underground tank to a rooftop tank would need to measure the hole position carefully, select the correct drill bit, and drill safely to create an opening for the pipe fitting.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret working drawings
- Select bits
- Select speed and feed.
- Select the type of metal to be drilled.
- Clamp work piece
- Take measurements
- Drill a metal
- Check the accuracy of drilled holes
- Clean machine and tools after work
- Keep machine and tools in safe custody
Tathmini ya matokeo
A hole drilled correctly as per specification
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain the procedures of:
- Drilling a hole on a plate by machine
Principles: The student should explain principles of:
- Drilling a hole on a plate by machine
Theories: The student should explain:
- Factors to consider when selecting suitable metals for drilling
- Parts of bench drilling machine and their functions.
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions while drilling a hole on a plate by machine
- Waste disposal
- First aid
Swali
Which safety precaution should be followed when drilling holes on metal plates?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado