Mada za sehemu hiiCutting pipesMada 3
- Performing square cut
- Performing external and internal reaming
- Performing thread cutting on different materials
Reaming in Pipe Fitting
Reaming is the process of smoothing and enlarging the end of a cut pipe to remove burrs, chips, and rough edges created during cutting. This ensures a proper fit when connecting pipes with fittings, taps, or valves.
External Reamer
An external reamer is used to enlarge and smooth the outer diameter of a pipe. It removes material from the outside of the pipe end, creating a clean, properly shaped edge for fitting into couplings or fittings.
Internal Reamer
An internal reamer is used to enlarge and smooth the inner diameter of a pipe or to remove burrs from the inside surface after cutting. This ensures proper water flow and prevents blockages.
When performing reaming tasks, consider the following:
- Pipe material — different materials (steel, copper, PVC) require different reaming techniques and tools
- Pipe diameter — select the correct size reamer that matches the pipe size
- Reaming speed — too fast may damage the pipe or tool; too slow produces rough surfaces
- Use of coolant — applying cutting fluid reduces friction and extends tool life
- Type of reamer — choose between internal and external reamer based on the needed result
- A piece of pipe (workpiece)
- Hacksaw or pipe cutter
- External reamer and internal reamer
- Bench vice
- Tape measure
- Coolant or cutting oil
- Personal Protective Equipment (PPEs): safety goggles, gloves, safety shoes
Preparation
- Observe all general safety rules before starting.
- Measure and mark the pipe length required.
- Cut the pipe using a hacksaw or pipe cutter.
- Secure the pipe firmly in a bench vice.
Performing External Reaming
- Select the correct external reamer for the pipe size.
- Position the reamer over the outer edge of the pipe end.
- Rotate the reamer in a clockwise direction while applying steady pressure.
- Continue reaming until the outer edge is smooth and properly sized.
- Apply coolant during reaming to reduce friction and heat.
Performing Internal Reaming
- Select the correct internal reamer for the pipe size.
- Insert the reamer into the pipe bore.
- Rotate the reamer clockwise while pulling it outward.
- Continue until the inner surface is smooth and free of burrs.
- Use a bristle brush to clean away swarf (metal chips) from the pipe.
Finishing
- Remove the reamed pipe from the vice.
- Clean all swarf and debris from the pipe using a brush.
- Wipe the pipe clean and apply a light coat of oil to prevent rusting.
- Inspect the reamed end for smoothness and proper dimensions.
Proper maintenance ensures tools last longer and perform well:
- Clean after use — remove metal chips, debris, and cutting fluids from the reamer
- Apply lubricant — use cutting oil during reaming to reduce wear
- Store properly — keep reamers in a dry, cool place to prevent corrosion
- Inspect regularly — check for dull edges, cracks, or chipped teeth; replace damaged tools
A plumber needs to prepare a 15 mm diameter copper pipe for connection to a fitting. After cutting the pipe to length, the plumber notices burrs on both the inner and outer edges.
Solution:
- Secure the pipe in a bench vice.
- Use an internal reamer (15 mm) to smooth the inner edge — rotate clockwise while pulling outward.
- Use an external reamer (15 mm) to smooth the outer edge — rotate clockwise while pressing against the outer surface.
- Apply cutting oil during reaming to keep the tool cool.
- Clean the pipe with a brush to remove all swarf.
- Wipe clean and check that the pipe end is smooth and ready for fitting.
In Tanzania, a plumber in Dar es Salaam or Mwanza uses reaming when installing water pipes in homes, schools, or markets. After cutting PVC or metal pipes with a hacksaw, the plumber must ream both ends to ensure smooth joints that do not leak. For example, when connecting a 20 mm pipe to a tap in a household water system, proper reaming prevents water pressure loss and ensures the fitting seals correctly, saving repair costs caused by leaks.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Clamp work piece.
- Take measurements.
- Cut the pipe.
- Perform reaming
- Clean the work area
- Store the work piece and tools in a safe place.
Tathmini ya matokeo
External and Internal reaming performed as per specification
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain:
- How to perform internal and external reaming.
Principles: The student should explain principles of: Performing internal and external reaming.
Theories: The student should explain: -
- Advantages of performing the reaming process. The uses of oil
Detailed knowledge about:
- Safety precautions while performing reaming
- Waste disposal
- First aid
Swali
What is the main purpose of reaming a cut pipe?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado