Mada za sehemu hiiPerforming cuttingMada 3
- Performing straight sawing
- Performing angular sawing
- Performing chiselling
Angular sawing is the process of cutting materials at angles other than 90°, such as 45°, 135°, or 180°, to create beveled or angled cuts that fit together precisely in construction or assembly work.
Angular sawing is a cutting operation where the saw blade is adjusted to cut at a specific angle. The three types of angles used are:
- Acute angle – less than 90° (e.g., 45°)
- Right angle – exactly 90°
- Obtuse angle – greater than 90° (e.g., 135°)
Precision is essential in angular sawing to ensure that pieces fit together correctly in finished products like vehicle body panels or structural components.
| Tools/Equipment | Safety Gears |
|---|---|
| Work bench | Safety boots |
| Bench vice | Overall |
| Hacksaw (with adjustable angle) | Leather gloves |
| Protractor (for measuring angles) | Safety goggles |
| Steel rule and scriber (for marking) | |
| Cotton waste |
Step 1: Prepare and Mark the Work
- Wear all required PPE (safety boots, overall, gloves, and safety goggles).
- Select the workpiece and mark the required angle using a steel rule, scriber, and protractor.
- Secure the workpiece firmly in the bench vice.
Step 2: Set the Angle
- A hacksaw can be used to cut angles of 45°, 90°, 135°, and 180°.
- For most work, set the hacksaw frame to the desired angle before cutting.
Step 3: Perform the Cut
- Position the hacksaw blade at the start of the marked line.
- Apply steady, even pressure while moving the saw forward.
- Support the piece being cut with your hand when the blade is almost through to prevent it from dropping.
Step 4: Handle Blade Changes
If the blade becomes blunt or breaks before completing the cut:
- Do not continue in the same slot with a new blade — the new blade will stick and be ruined.
- If possible, rotate the workpiece and start a new cut from the other side.
- If rotation is not possible, start a new cut next to the first cut.
Step 5: Complete and Store
- Release the tension on the hacksaw blade before putting it away. This prevents the frame from losing its spring shape.
- Clean the work area and store tools properly.
- Never test blade sharpness by running your finger across the teeth — you will get cut.
- Store the hacksaw so you do not accidentally grasp the teeth when picking it up.
- The burr on cut surfaces is sharp — do not wipe chips away with your bare hand.
- If you are right-handed, cut on the right-hand side of the vice; if left-handed, cut on the left. This prevents injury if the blade breaks during the cutting stroke.
Take a piece of 10 mm flat bar × 200 mm long:
- Mark six sections of approximately 30 mm each.
- Cut each section at the required angle using proper technique.
- Have your teacher check your work for accuracy and finish.
In Tanzania, angular sawing skills are used when repairing vehicle body panels, cutting metal brackets for farm equipment, or fabricating metal structures at local workshops. For example, a mechanic at a garage in Mwanza may need to cut a metal bracket at a 45° angle to fit a replacement part on a customer's pick-up truck, ensuring the piece fits securely during installation.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret drawings
- Select tools and equipment
- Take measurements
- Cut workpiece
- Check for accuracy
- Observe safety precautions
- Clean tools, workpiece, and work place
- Store tools, equipment, and workplace
Tathmini ya matokeo
Pieces of material cut as per technical specifications.
Tathmini ya maarifa
Method used — the student should explain how to cut workpiece in different sizes.
Principles — the student should explain the principles of:
- Taking measurements
- Marking workpiece
- Cutting process
Theories — the student should explain:
- Different types of materials and their properties
- Application of different angular sawing
- Uses of sawing tools and equipment
- Use of measuring tools
Circumstantial knowledge — detailed knowledge about:
- Safety precautions while performing sawing process
- Safe handling of work tools and equipment
- Waste disposal
Swali
What is angular sawing?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado