Mada za sehemu hiiPerforming on job training to subordinateMada 2
- Preparing training needs
- Carrying out training of subordinates
Preparing Training Needs
When managing a vehicle workshop, a supervisor must ensure that all workers have the right skills to perform their tasks safely and effectively. Preparing training needs is the process of identifying what skills, knowledge, or attitudes a subordinate lacks and planning how to provide them through training.
Training needs preparation helps the workshop run smoothly, reduces accidents, improves work quality, and increases productivity. It also helps the supervisor allocate tasks according to each worker's ability.
A training need is a gap between what a worker currently knows or can do and what they should know or be able to do to perform their job properly. For example, if a mechanic does not know how to use a wheel alignment machine, that gap becomes a training need.
Training needs can be identified through:
- Direct observation of work performance
- Feedback from customers or supervisors
- Task analysis and job descriptions
- Checking work output for errors or defects
1. Identify the Job Tasks
List all the tasks that each subordinate is expected to perform in the workshop. These may include:
- Oil and filter changes
- Brake system inspection
- Wheel alignment and balancing
- Battery testing and replacement
- Engine diagnostics
2. Assess Current Competency
Determine what each worker currently knows and can do. This can be done by:
- Asking questions about their experience
- Watching them perform tasks
- Reviewing their previous training records
- Testing their knowledge with simple questions
3. Identify the Gap
Compare what the worker can do with what they should be able to do. The difference between these two is the training gap. For example, a worker may be able to change oil but cannot check brake fluid levels — that difference is a training gap.
4. Determine the Type of Training Required
Decide what kind of training will fill the gap. Common types include:
- On-the-job training (OJT): Learning by watching and doing under supervision
- Formal classroom training: Learning theory in a structured setting
- Mentoring: Learning from an experienced colleague
5. Develop a Training Plan
A good training plan should include:
- The specific skill or knowledge to be learned
- The person who will provide the training (trainer)
- The time and duration of training sessions
- The tools and materials needed
- How the trainee will be evaluated after training
6. Implement the Training
Put the plan into action. Ensure:
- All required tools and equipment are available
- Safety gears are worn
- The training area is clean and organized
- The trainee understands the instructions
7. Evaluate the Training
After training, check whether the worker can now perform the task correctly. This may involve:
- Observing them perform the task
- Asking them to explain what they did
- Checking the quality of their work
In a small workshop in Arusha, the supervisor, Mwalimu Juma, has three assistants. He notices that Assistant Mwinyimkuu often damages wheel nuts when removing tires. Mwalimu Juma identifies that Mwinyimkuu lacks proper knowledge of using correct socket sizes and applying proper torque.
Mwalimu Juma prepares a training need:
- Gap identified: Incorrect use of socket wrenches and torque settings
- Training type: On-the-job training
- Training plan: Demonstrate correct socket selection and torque wrench use, then observe Mwinyimkuu practice on three vehicles
- Evaluation: Check that wheel nuts are tightened to correct torque on test vehicles
When preparing and conducting training in the workshop, the following tools and safety equipment are essential:
Tools:
- Tool box, socket set, torque wrench
- Multimeter for electrical testing
- Wheel alignment machine and wheel balancing machine
- Headlight aiming machine
- Bench vices and anvils
- Hydraulic press
Safety Equipment:
- Safety boots, gloves, and clear glasses
- Overcoat for protection
- First aid kit
- Firefighting equipment
- Clear emergency exits
Always ensure the training area is free of oil spills, loose tools, and obstructions before beginning any practical session.
In Tanzania, small vehicle repair shops in towns like Mwanza, Dodoma, and Mbeya often employ young apprentices with little formal education. A shop owner who learns to prepare training needs can systematically improve the skills of these young workers, resulting in better service for customers, fewer vehicle damage claims, and higher earnings for the business — for example, a well-trained mechanic can earn up to TZS 500,000 per month compared to TZS 250,000 for an untrained one.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Prepare capability chart of the subordinates
- Conduct needs assessment
- Identify knowledge and skills to be imparted
- Identify previous knowledge and skills possessed by the person to be trained
- Prepare a training programme
- Carry out the training programme by using a steps plan (prepare, present, try out, assign work)
- Continue assessing the progress of workers
- Make necessary adjustments to the training programme schedule
- Evaluate the adjustments made
Tathmini ya matokeo
A training programme prepared to meet job requirements and the trained person can execute tasks to required standards.
Tathmini ya maarifa
Method used — the student should explain how to:
- Prepare a training programme
Principles — the student should explain the principles of:
- Carrying out training programme by using the four steps plan (prepare, present, try-out, assign work)
- Basic principles of educational psychology
Theories — the student should explain:
- The necessity of identifying previous knowledge and skills of the person to be trained
Circumstantial knowledge — detailed knowledge about:
- Safety precautions while training subordinates
- Safe handling of tools, training materials and equipment
- Waste disposal
Swali
What is a training need in a vehicle workshop?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado