Mada za sehemu hiiRepairing tubed tyresMada 3
- Replacing worn tyre
- Refilling pressure and foam material in tyre
- Performing tyre rotation
Refilling Tyre Pressure and Foam Material in Tyres
Tyres are the only part of a vehicle that touch the road. Keeping them properly inflated is essential for safety, fuel economy, and tyre life. Sometimes, especially in heavy-duty vehicles or rough terrain, tyres are filled with foam material instead of just air to prevent them from going flat when punctured.
- Safety: Under-inflated tyres overheat and can blow out while driving.
- Fuel economy: Correct pressure reduces fuel consumption.
- Tyre life: Proper inflation prevents uneven wear, extending tyre life.
- Vehicle handling: Correct pressure ensures good steering and braking.
Before refilling, you must know the correct pressure.
- Remove the valve cap from the tyre valve stem.
- Press the tyre pressure gauge firmly onto the valve stem.
- Read the pressure on the gauge.
- Compare with the manufacturer's recommended pressure (found in the service manual or on a sticker inside the driver's door).
Tools Needed
- Air compressor
- Tyre inflator
- Tyre pressure gauge
Steps to Inflate a Tyre
- Prepare the tyre — Ensure the valve stem is clean and free from dirt.
- Check current pressure — Use the pressure gauge to measure existing pressure.
- Connect the inflator — Attach the airline from the compressor to the valve stem securely.
- Inflate gradually — Turn on the compressor slowly. Watch the gauge closely.
- Stop at correct pressure — When the gauge reads the recommended pressure, disconnect immediately.
- Check again — Use the gauge to verify the final pressure is correct.
- Replace the valve cap — Screw it back on tightly to keep out dirt and moisture.
Example
A car tyre requires 32 PSI (pounds per square inch). The gauge shows 26 PSI. You inflate until the gauge reads 32 PSI. The tyre now has the correct pressure.
Foam-filled tyres are used in situations where a punctured tyre must continue working, such as:
- Construction vehicles
- Tractors and farm machinery
- Vehicles operating on rough or thorny roads
The foam is a special polyurethane material that fills the inside of the tyre. When a puncture occurs, the foam seals the hole and supports the vehicle weight, allowing continued operation.
Tools Needed
- Foam-fill kit
- Service manual
- Safety glasses, gloves, safety boots, overall
Steps
- Read the service manual — Follow the manufacturer's instructions for the specific vehicle.
- Remove the wheel — Lift the vehicle and remove the wheel safely.
- Deflate the tyre — Remove the valve core to let out all air.
- Prepare the foam kit — Mix the foam components according to kit instructions.
- Inject the foam — Use the kit to inject the correct amount of foam into the tyre through the valve stem.
- Inflate the tyre — Add air to the recommended pressure after the foam has expanded.
- Mount the wheel — Reattach the wheel to the vehicle.
- Check balance — Ensure the wheel is properly balanced after foam filling.
- Always wear safety glasses, gloves, and safety boots.
- Wear overalls to protect your clothing.
- Ensure the vehicle is securely supported before working on wheels.
- Never exceed the recommended tyre pressure.
- Keep hands and face away from the valve stem when inflating.
- Work in a well-ventilated area when using foam materials.
In Tanzania, many daladala and truck drivers operate on roads with thorns and debris. If a tyre gets a puncture, the driver may need to continue driving to reach a repair shop. Foam-filled tyres are commonly used on heavy vehicles like lorries and tractors on farms and construction sites in areas like Arusha and Dodoma, where rough terrain can cause frequent punctures. Knowing how to check and refill tyre pressure also helps taxi and private car owners in Dar es Salaam save fuel and extend tyre life, reducing transport costs.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Check tyre condition
- Connect air supply to the tyre valve
- Refill air to specified pressure
- Apply foam material where required
- Verify final pressure
- Observe safety precautions
- Clean and store tools and equipment
Tathmini ya matokeo
Tyre pressure and foam material refilled as per specifications.
Tathmini ya maarifa
Method used — the student should explain how to:
- Check tyre pressure
- Refill tyre air pressure and foam material
Principles — the student should explain the principles of:
- Tyre inflation pressure
- Run-flat / foam-filled tyre technology
Theories — the student should explain:
- Tyre pressure and load rating relationship
- Effects of under-inflation and over-inflation
- Foam-filled tyre applications
Circumstantial knowledge — detailed knowledge about:
- Safety precautions during tyre inflation
- Safe handling of compressed air equipment
- Waste disposal
Swali
Which of the following is NOT a reason for maintaining correct tyre pressure?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado