Mada za sehemu hiiServicing pneumatic brakesMada 2
- Servicing pneumatic brake pads
- Servicing pneumatic brake linings
Servicing Pneumatic Brake Linings
Brake linings are essential friction components in pneumatic brake systems. Regular servicing ensures safe vehicle operation and prevents costly damage to other brake components. This note covers how to identify, inspect, and service brake linings on pneumatic drum brakes commonly found on heavy vehicles in Tanzania.
A brake lining is a friction material attached to the face of a brake shoe. When the brake shoe contacts the rotating brake drum, friction between the lining and drum creates the stopping force.
Key characteristics:
- Brake linings can be bonded (glued) or riveted to the metal brake shoe
- Linings have a predetermined thickness that wears down over time through repeated braking
- Regular inspection is required to check lining thickness
- Linings must be replaced before they wear completely, as exposed metal backing can damage the brake drum
Manufacturers use various materials to make brake linings durable and effective:
Semi-metallic linings:
- Contain 30% to 70% metals such as copper, iron, or steel
- Include graphite lubricant and filler materials
- Offer good durability and heat resistance
Non-metallic (ceramic) linings:
- Made from ceramic materials, aramid fibres, and carbon composites
- Better at dispersing heat generated by friction
- Produce less noise during braking
Other materials include: cellulose mineral fibres, chopped glass, copper fibres, and steel fibres
When choosing brake linings, seven important criteria must be considered:
- High friction coefficient – The lining must maintain strong friction across a wide temperature range
- Heat resistance – Must withstand high temperatures without losing effectiveness
- Abrasion resistance – Must resist wear over long periods
- Gradual wear – Should wear slowly and have a long service life
- Noise-free operation – Should not create squeaking or other sounds
- Anti-glazing properties – Must not lose braking effectiveness when heated
- Contamination resistance – Must resist dust, water, and dirt
It is critical to identify when brake linings need replacement:
Sound Indicator
When brake linings wear out completely, metal backing plates contact the drum, creating a loud squeaking or scraping sound each time the brake is applied.
Visual Thickness Check
- Inspect lining through the wheel rim
- Replace when lining thickness reaches approximately 3 mm or less
- Some manufacturers specify minimum thickness of 2 mm or 1.5 mm
Warning Lamps
Some vehicles have dashboard warning lamps that indicate low brake lining thickness.
Tools and Materials Required
- Jack and jack stands
- Lug wrench
- C-clamp or caliper spreader tool
- Basic tool set (spanners, sockets)
- Service manual
- Wheel blocks
- Brake shoe relining machine (for riveted linings)
- New brake linings
- Cleaning solvent
- Safety equipment: gloves, mask, safety boots, overall
Safety Precautions
- Ensure vehicle is on stable ground and secured with wheel chocks
- Wear appropriate personal protective equipment (PPE)
- Set parking brake before starting work
- Use jack stands when working under the vehicle
Step-by-Step Procedure
Step 1: Prepare the vehicle
- Set parking brake and place wheel blocks on opposite wheels
- Loosen lug nuts slightly before jacking
- Raise the vehicle and secure with jack stands
Step 2: Remove the wheel
- Remove lug nuts completely
- Carefully pull the wheel away from the hub
- Place wheel aside safely
Step 3: Access the brake assembly
- Locate the brake chamber and slack adjuster
- Inspect the brake drum for cracks, scoring, or excessive wear
- Measure drum diameter against manufacturer specifications
Step 4: Remove old brake linings
- Disconnect the brake chamber from the brake spider
- Remove the brake shoes from the anchor pins
- For riveted linings: use a drill or rivet remover to extract rivets
- For bonded linings: carefully pry off the old lining
Step 5: Inspect and prepare components
- Clean brake drum with appropriate solvent
- Inspect brake shoes for warping or damage
- Check slack adjuster and camshaft for proper operation
Step 6: Install new brake linings
- For riveted linings: position new lining and rivet securely using brake shoe relining machine
- For bonded linings: apply approved adhesive and press lining onto shoe
- Ensure lining is properly aligned and seated
Step 7: Reassemble and adjust
- Reinstall brake shoes onto anchor pins
- Connect brake chamber
- Adjust slack adjuster to manufacturer specifications
- Ensure proper clearances between lining and drum
Step 8: Test the system
- Reinstall wheel and lower vehicle
- Conduct a functional test by applying brakes
- Check for proper brake engagement and no unusual noises
Scenario: A bus owner in Dar es Salaam notices a squeaking sound when applying brakes on a Mercedes Benz truck with pneumatic drum brakes.
Diagnosis and Service:
-
Identify the problem: The squeaking sound indicates metal-to-metal contact, meaning brake linings are worn out.
-
Inspection: Upon visual inspection through the wheel rim, the lining measures approximately 2 mm—below the 3 mm minimum.
-
Service action:
- Raise the vehicle and remove the wheel
- Remove the brake drum and inspect both brake shoes
- The lining on the rear shoe is worn to 2 mm; the front shoe measures 4 mm
- Replace both linings as a set (always replace in pairs on the same axle)
-
Cost consideration in Tanzanian shillings:
- One set of quality brake linings: TZS 120,000
- Labour cost: TZS 50,000
- Total service cost: TZS 170,000
-
Result: After replacement and proper adjustment, the brakes operate smoothly without noise. The bus owner avoids potential drum damage that could cost TZS 400,000 or more.
- Brake linings are friction materials that create stopping force when pressed against brake drums
- They can be semi-metallic (durable, heat-resistant) or non-metallic (ceramic, quiet)
- Always select linings based on friction coefficient, heat resistance, and wear characteristics
- Replace linings when thickness reaches 3 mm or less, or when squeaking sounds occur
- Follow proper safety procedures and use correct tools during servicing
In Tanzania, truck and bus owners in cities like Arusha, Mwanza, and Dodoma rely on properly serviced pneumatic brakes for safe transport of goods and passengers on busy roads such as the Tanzania-Zambia Highway (TAZARA) and the Northern Corridor. For example, a small transport business owner operating a fleet of three trucks between Mbeya and Dar es Salaam can save money by training their mechanics to service brake linings in-house, replacing worn linings at TZS 150,000 per axle instead of paying TZS 400,000 for emergency drum repairs caused by delayed replacement.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Depressurise air system
- Remove drum and shoes
- Replace linings
- Inspect S-cam and slack adjuster
- Reinstall and adjust
- Observe safety precautions
Tathmini ya matokeo
Pneumatic brake linings serviced per specifications.
Tathmini ya maarifa
Method used — the student should explain how to service pneumatic brake linings.
Principles — the student should explain the principles of:
- Pneumatic drum brake self-energising
- Slack adjuster operation
Theories — the student should explain:
- S-cam vs wedge brakes
- Slack adjuster types
- Effects of incorrect adjustment
Circumstantial knowledge — detailed knowledge about:
- Compressed-air safety
- Brake dust safety
- Waste disposal
Swali
What is a brake lining?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado