Mada za sehemu hiiHandling fire accidentsMada 2
- Handling firefighting
- Handling different types of fire
Fire is a chemical reaction that produces heat and light. For fire to start and continue burning, three elements must be present at the same time. These three elements form what is called the fire triangle:
- Fuel – any combustible material such as wood, paper, petrol, oil, or electrical wiring
- Oxygen – the air that supports combustion
- Heat – the ignition temperature needed to start the reaction
If any one of these three elements is removed, the fire will be extinguished. This is the basic principle behind all firefighting methods.
Fires in auto electrical workshops can occur from:
- Electrical issues – overloaded circuits, faulty wiring, or damaged electrical equipment
- Flammable liquids – petrol, diesel, or cleaning solvents stored improperly
- Human error – careless smoking, leaving equipment unattended
- Sparks and open flames – welding, grinding, or cutting operations
- Poor housekeeping – accumulation of combustible waste materials
Different types of fires require different extinguishing agents. The table below shows which extinguisher to use for each class of fire:
| Extinguisher Type | Class of Fire | What It Extinguishes | How It Works |
|---|---|---|---|
| Water | Class A | Paper, wood, cloth, plastic | Cools the fuel |
| Carbon Dioxide (CO₂) | Class B, C | Liquids, gases, electrical fires | Smothers by displacing oxygen |
| Dry Chemical (ABC) | Class A, B, C | Multiple types | Interrupts chemical reaction |
| Dry Powder | Class D | Combustible metals (magnesium, sodium) | Separates metal from oxygen |
Fire Blanket – A fire blanket is made of fire-resistant material and is used to smother small fires or wrap around a person whose clothes are on fire. It works by cutting off the fire's oxygen supply.
When using a fire extinguisher, remember the PASS technique:
- Pull the pin – This breaks the tamper seal and allows you to discharge the extinguisher
- Aim at the base of the fire – Never aim at the flames; aim at the fuel source
- Squeeze the handle – This releases the extinguishing agent
- Sweep from side to side – Keep aiming at the base while moving slowly toward the fire
Important: Stand 3 to 6 meters (10 to 20 feet) away from the fire when using an extinguisher.
Before attempting to fight a fire, always consider these rules:
- Know what is burning – Using the wrong extinguisher can make the fire worse
- Check the fire size – Only attempt to extinguish small fires in the early stages
- Have an escape route – Always keep your back toward an exit
- Never inhale toxic smoke – Leave the area if thick smoke is present
- Use the correct equipment – Make sure the extinguisher matches the fire class
- Trust your instincts – If the fire is too dangerous, evacuate and call the fire department
Fire extinguishers must be properly maintained to work when needed:
- Monthly visual inspection – Check for damage, ensure the pressure gauge is in the green zone
- Annual professional inspection – A qualified technician should check internal components
- Recharging – After any use, even partial, the extinguisher must be recharged
- Location – Keep extinguishers visible, accessible, and not blocked
- Records – Maintain a log of all inspections and maintenance activities
In Tanzania, auto electrician workshops in places like Buguruni, Mwanza, or Arusha often store petrol for cleaning vehicle parts. If a petrol spill ignites during engine repair, knowing how to use a CO₂ or ABC dry chemical extinguisher could prevent a small fire from destroying the entire workshop and nearby properties worth millions of Tanzanian shillings.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools, equipment and safety gears
- Apply right class of fire extinguisher
- Apply right class of firefighting materials
- Check and test fire extinguishers
- Observe safety precautions
- Clean up tools, equipment and working place
- Store tools, equipment and safety gears
Tathmini ya matokeo
firefighting equipment and materials handled as per rules and regulations
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Identify different type of fire extinguisher
- Apply the right type of fire extinguishers
- Apply right type of firefighting materials
Principles: The student should explain principles involved in: Handling firefighting equipment and materials
Theories: The student should explain: -
- Types of fire extinguishers
- Handle different types of fire extinguishers
- Importance of checking and servicing fire extinguishers
Detailed knowledge about: OSHA rules and regulations
Swali
What are the three elements that must be present simultaneously for fire to start and continue burning?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado