Mada za sehemu hiiReplacing suspension shock absorbersMada 2
- Replacing telescopic shock absorber
- Replacing McPherson strut shock absorber
Replacing Telescopic Shock Absorber
A telescopic shock absorber is the most common type of shock absorber used in vehicle suspension systems. It is designed to control or dampen the up-and-down motion of the vehicle's springs, especially after the vehicle hits a bump or pothole. The term "telescopic" comes from its structure, which has two tubes that slide into each other like a telescope. It works by using hydraulic fluid: as the vehicle moves over uneven surfaces, the piston inside the shock absorber moves up and down, forcing oil through small internal valves. This action creates resistance to the spring's motion, reducing bounce and improving ride control.
A defective telescopic shock absorber can no longer control the up-and-down motion of the vehicle's suspension properly. This may be caused by internal wear, oil leakage, bent piston rods, or damaged seals. When this happens, the vehicle may bounce too much after bumps, feel unstable, or take longer to stop when braking. Knocking noises or leaking oil around the shock absorber body are also common signs of damage. If the shock absorber is damaged, leaking, or weak, it must be replaced to restore proper suspension performance.
Before starting the replacement, gather the following:
Personal Protective Equipment (PPE): safety boots, overalls, gloves, safety clear glasses, helmet
Tools and Equipment:
- Hydraulic jack and jack stand
- Wheel spanners
- Wrench and socket set
- Spanner set
- Torque wrench
- Service manual
- Penetrating oil
- Cotton rags
Materials: replacement shock absorber
Follow these steps carefully under the supervision of your teacher:
- Select appropriate tools, equipment and materials required for the job.
- Park the vehicle on a level surface and apply the parking brake.
- Loosen the wheel nuts slightly while the vehicle is on the ground.
- Use a jack to lift the vehicle and support it securely with jack stands.
- Remove the wheel to access the shock absorber.
- Spray penetrating oil on the mounting bolts if they are rusted or difficult to remove.
- Remove the bolts and nuts holding the old shock absorber at the top and bottom mounting points.
- Take out the old shock absorber carefully from the suspension assembly.
- Position the new telescopic shock absorber in place, ensuring it is correctly aligned.
- Secure it with the correct bolts and nuts and tighten to the manufacturer's torque specification using a torque wrench.
- Reassemble any disconnected components such as brake lines or suspension links.
- Reinstall the wheel and tighten the nuts hand-tight at first.
- Lower the vehicle using the jack, and then fully tighten the wheel nuts to the specified torque.
- Test the vehicle gently by driving slowly to check for improved ride quality and noise-free suspension.
- Clean tools and working area, and store tools as per workshop regulations.
A taxi driver in Dar es Salaam notices that their vehicle bounces excessively when driving through potholes on Kilwa Road. They also see oil leaking around the front shock absorber and hear a knocking sound when going over speed bumps. These are clear symptoms that the telescopic shock absorber is defective and needs replacement. Without replacement, the vehicle would be unstable, and other suspension parts would wear out quickly.
- Always apply the parking brake and use jack stands when working under a vehicle.
- Use penetrating oil on rusted bolts to ease removal.
- Tighten all bolts to the manufacturer's torque specifications — never overtighten or undertighten.
- Lower the vehicle safely and check that all components are properly connected before test driving.
- Clean the working area after completing the job.
In Tanzania, a mechanic at a garage in Mwanza or Arusha regularly replaces telescopic shock absorbers on common vehicles like Toyota Probox, Nissan Caravan, and Toyota Hilux. When a taxi driver or private car owner reports excessive bouncing or oil leakage, the mechanic follows this exact procedure to restore the vehicle's stability. This skill is essential for road safety in Tanzania, where many roads have potholes and uneven surfaces, and a properly working suspension system helps prevent accidents and ensures passenger comfort.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools, equipment and safety gear
- Identify and locate defective telescopic shock absorber
- Inspect telescopic shock absorber
- Replace faulty telescopic shock absorber
- Observe safety precautions
- Clean, tools, equipment and work place
- Store tools and equipment
Tathmini ya matokeo
Shock absorbers are replaced as per manufacturer’s specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Check telescopic shock absorber condition
- Replace telescopic shock absorber
Principles: The student should explain the principles involved in replacing telescopic shock absorber
Theories: The student should explain:
- Purpose of shock absorber
- Types of shock absorbers
- Importance of replacing defective telescopic shock absorber
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions Manufacture’s service manual book
Swali
What does the term "telescopic" in a telescopic shock absorber refer to?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado