Mada za sehemu hiiCarrying out risk assessmentMada 2
- Controlling risk
- Managing safety gears
Controlling Risk in the Auto-Electric Workshop
Controlling risk means taking action to eliminate or reduce the danger identified during risk assessment so that work can be carried out safely. After you identify hazards and evaluate risks, the next step is to apply the most effective control measures available.
The Hierarchy of Risk Control
Risk control follows a hierarchy — a ranked list of methods from the most effective to the least effective. You must always try the methods at the top of the list first.
-
Elimination — Remove the hazard completely from the workplace.
- This is the best option because the danger no longer exists.
-
Substitution — Replace the hazardous tool, material, or process with a safer one.
- Example: Use a battery-powered drill instead of a corded electric drill to avoid trip hazards from cables.
-
Engineering Controls — Isolate people from the hazard using physical changes.
- Example: Install insulated barriers around battery charging areas.
-
Administrative Controls — Change how people work through rules, training, or signage.
- Example: Display "No Smoking" signs near fuel storage areas.
-
Personal Protective Equipment (PPE) — Protect the worker with gear worn on the body.
- PPE is the last line of defense and should be used only when other controls are not possible.
Control Measures for Auto-Electric Work
In an auto-electric workshop, common risks and their control measures include:
- Electric shock — Disconnect the battery before working on wiring; use insulated tools.
- Cuts from sharp components — Wear protective gloves when handling metal edges.
- Fume inhalation — Work in ventilated areas; use respiratory masks when soldering.
- Noise from machines — Wear ear plugs when operating testing equipment.
- Eye injuries — wear safety clear glasses when cleaning parts with compressed air.
- Foot injuries — Wear safety boots with steel toe caps.
Worked Example: Controlling Risk When Testing a Vehicle Battery
A student technician needs to test a car battery using a multimeter.
-
Identify the hazard: Electric shock from the 12V battery or short circuit from metal tools.
-
Apply control measures following the hierarchy:
- Elimination: Disconnect the negative terminal first to prevent accidental short circuits.
- Substitution: Use insulated test probes instead of bare metal wires.
- Engineering Controls: Place a rubber mat on the workbench.
- Administrative Controls: Follow the workshop rule: "Always disconnect battery before working on wiring."
- PPE: Wear safety boots and gloves.
By applying these controls in order, the technician reduces the risk to the lowest acceptable level.
Reporting and Reviewing Controls
After applying risk controls, you must:
- Report all control measures applied to your supervisor
- Check that controls are working properly before continuing work
- Review controls if new hazards appear or if an accident occurs
Real-life application
In Tanzania, auto-electric technicians apply risk control daily when repairing vehicles at garages in Dar es Salaam, Arusha, or Mwanza. For example, before testing a customer's car battery at a local garage, a technician disconnects the battery terminals, wears gloves and safety boots, uses insulated tools, and works in a ventilated area — applying the hierarchy of controls to prevent electric shock and ensure safe service, which protects both the technician and the customer's vehicle.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools and equipment
- Interpret service manuals
- Supervise practice safe workshop practices to protect yourself, others and properties
- React correctly and safely when faced with an emergency
- Identify and apply correctly all emergency equipment and supplies
- Make periodic inspections of workshop area and all equipment and prepare report
- Conduct safety training
- Identify any safety hazard material
- Handle hazard material correctly
- Prepare universal workshop color codes and know what the color represents
- Make out and file safe report
- Be aware of the dangerous of compressed air
- Ensure availability of personal protective equipment
- Supervise compressed air rules
- Monitor good environmental practices
- Clean tools and equipment
- Store tools and equipment
Tathmini ya matokeo
Risk controlled as per OSHA standard and automobile regulations
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Eliminate the hazard
- Evaluate the risk
- Estimate the risk
- Introduce a safe system of work
- Provision of PPE
Principles: The student should explain the principles involved in controlling risk
Theories: The student should explain: -
- Carry out risk assessment
- Conducting safety training
- Inspecting workshop areas tools and equipment
- Handling Hazard material correctly
- Follow compressed air rules
Circumstantial knowledge:
Detailed knowledge about:
- First aid
- OSHA’s rules and regulations
- Safety precautions
- Waste disposal
Swali
According to the hierarchy of risk control, which method is considered the MOST effective way to control a hazard?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado