Mada za sehemu hiiPreparing reportsMada 2
- Collecting information
- Writing technical reports
Collecting Information in Auto-electric Workshop
Collecting information means gathering facts, data, and details about work activities in the workshop. In auto-electric mechanics, proper information collection helps the technician keep accurate records, order correct parts, and provide good service to customers. Good records also help the workshop manager plan budgets and monitor performance.
- To track used parts and consumables
- To record time spent on each job
- To know which items need re-ordering
- To prepare reports for the supervisor
- To solve customer complaints with evidence
1. Job Card Information
- Customer name and contact
- Vehicle registration number
- Vehicle make and model
- Fault reported by customer
- Work done on the vehicle
- Parts replaced
- Labour hours
2. Consumables Used
- Wiring harnesses
- Fuses and relays
- Batteries
- Bulbs and LEDs
- Cables and terminals
- Insulating tape and cable ties
- Soldering materials
3. Subordinates' Reports
- Daily work completed
- Problems encountered
- Materials needed
Direct Observation
Walk around the workshop and observe what work is being done. Check which parts are removed from vehicles and what new parts are installed.
Interviewing
Ask customers about the problems they face with their vehicles. Talk to subordinates about the work they have completed.
Using Documents
Read job cards, repair orders, and previous reports. These documents contain valuable information about workshop activities.
Using Technology
Enter data into a computer using spreadsheet or database software. Take photos of completed work for records.
Hardcopy (Paper Form)
Write information on paper forms, job cards, or registers. Use the following steps:
- Obtain a blank recording form or job card
- Write the date and job number
- Record all details clearly in handwriting
- Check the information for accuracy
- File the document in a safe place
Softcopy (Computer Form)
Enter information into a computer using software. Follow these steps:
- Open a spreadsheet or database program
- Create columns for each type of information
- Enter data in the correct columns
- Save the file with a proper name
- Make backup copies of important files
A customer brings a Toyota Corolla with a dead battery. The auto-electrician performs the following:
- Job card entry: Write customer name (Mr. Juma), vehicle (T 123 ABC), fault (battery not charging)
- Work done: Tested battery voltage (12.0V), tested alternator output (13.8V), replaced battery
- Parts used: One 12V car battery — TZS 85,000
- Labour: 1 hour — TZS 15,000
- Total: TZS 100,000
The information is recorded on the job card (hardcopy) and also entered into the workshop computer (softcopy).
When collecting information in the workshop:
- Wear safety boots to protect feet from falling objects
- Wear overcoat when working near dirty or oily equipment
- Keep the office area clean and organized
- Handle documents with clean hands to avoid staining
Collecting information is a vital skill for every auto-electric technician. By gathering accurate data about consumables, jobs completed, and time spent, you help the workshop run efficiently. Always record information in both hardcopy and softcopy forms. Good records lead to better service, accurate billing, and successful workshop management.
In Tanzania, when you work as an auto-electrician at a garage in Dar es Salaam or Arusha, you will collect information from vehicles brought by customers. For example, if a daladala driver brings a matatu with alternator problems, you record the vehicle details, the fault, the parts replaced (like a new alternator for TZS 250,000), and labour costs. This record helps you prepare the bill, order new parts from your supplier, and if the driver returns with the same problem later, you can check your files to see what was done before.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to:
- Collect information for preparing budget reports
- Collect information for preparing a budget report
- Collect information for preparing action plan
- Keep records
Tathmini ya matokeo
The collected information contains the required contents as per management requirements
Tathmini ya maarifa
Knowledge evidence:
Methods used: The students should explain how to collect technical information
- Keeping records
Principles: The students should explain the principles involved in collecting information
Theories: The students should explain:
- Importance of collecting information
- Contents of technical information
Circumstantial knowledge:
Detailed knowledge about:
- Report writing skills
- Managerial skills
Swali
Which of the following is NOT a reason for collecting information in an auto-electric workshop?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado