Mada za sehemu hiiConstructing simple electric circuitsMada 4
- Constructing simple series circuits
- Constructing simple parallel circuits
- Constructing simple combination circuits
- Servicing circuit connectors
Constructing Simple Parallel Circuits
A parallel circuit is a type of electrical circuit in which components are connected in multiple paths for the flow of electric current. In a parallel circuit, there are two or more pathways for the current to travel, and each component is connected across the same voltage. When one terminal of all electrical devices is connected to a common point and the other terminals are connected to another common point, the circuit is called parallel.
-
Multiple Paths for Current: In a parallel circuit, components are connected so that there are multiple pathways for the electric current to flow. This is different from a series circuit, where there is only one pathway.
-
Same Voltage Across Components: All components in a parallel circuit are connected across the same voltage source. The voltage across each component is the same as the voltage of the source. This means: V=V1=V2=V3
-
Independent Current Paths: Each branch or path in a parallel circuit is independent of the others. The current flowing through one path does not affect the current flowing through other paths.
-
Total Current is the Sum of Branch Currents: The total current flowing into a parallel circuit equals the sum of the currents flowing through each branch. Mathematically: IT=I1+I2+I3
-
Failure of One Branch Does Not Affect Others: If one branch or component fails (opens), the others continue to operate. Unlike series circuits where one broken component stops the whole circuit, parallel circuits continue working even if one path is broken.
- Independent Operation: Each component operates independently because it receives the full voltage.
- Reliability: If one component fails, the others continue to work. This redundancy makes parallel circuits more reliable.
- Easy to Add or Remove Components: It is easy to add or remove components without affecting the operation of other components.
- Maintained Voltage: Each component receives the full source voltage, so devices work at their optimum performance.
- Maintained Brightness in Lighting: In parallel-connected light bulbs, each bulb receives full voltage and shines at maximum brightness.
- Current flowing through different devices connected in parallel is different.
- More connecting wires are required to make a parallel circuit compared to a series circuit.
The total resistance of resistors in parallel is calculated differently from series circuits. Here, the reciprocal (1/R) values are added:
RT1=R11+R21+R31
Note: The total resistance is always smaller than any individual resistor in a parallel circuit.
Special Formula for Two Resistors in Parallel
For two resistors connected in parallel, you can use the product-over-sum formula:
RT=R1+R2R1×R2
Question: Two resistors of resistance 3Ω and 6Ω are connected in parallel across a battery. Determine the total circuit resistance.
Solution:
Given: R1=6Ω, R2=3Ω
Using the formula:
RT1=R11+R21
RT1=61+31
RT1=61+62=63=21
Therefore: RT=2Ω
Or using product-over-sum:
RT=6+36×3=918=2Ω
Question: Three resistors each of 4Ω are connected in parallel. Find the total resistance.
Solution:
Given: R1=4Ω, R2=4Ω, R3=4Ω
RT1=41+41+41
RT1=43
Therefore: RT=34Ω≈1.33Ω
The voltage across each resistor in a parallel circuit is the same as the applied voltage:
V=V1=V2=V3
For example, if a 5-watt lamp and a 10-watt stator motor are connected in parallel with a 12V supply, the voltage across each device is 12V, even though their resistances are different.
The total current flowing into the parallel combination equals the sum of the currents in each branch:
IT=I1+I2+I3
Worked Example 3: Finding Branch Currents
Question: From a parallel circuit with R1=3Ω, R2=6Ω, and R3=24Ω connected to a 48V supply, find: (a) Current through each resistor (I1, I2, I3) (b) Total current (IT) (c) Total resistance (RT)
Solution:
(a) Using Ohm's Law (I=RV):
I1=3Ω48V=16A
I2=6Ω48V=8A
I3=24Ω48V=2A
(b) Total current:
IT=I1+I2+I3=16A+8A+2A=26A
(c) Total resistance:
RT=ITV=26A48V≈1.85Ω
(Alternatively, using the parallel formula: RT1=31+61+241=248+4+1=2413, so RT=1324≈1.85Ω)
Materials Needed
- Two light bulbs
- Battery or power supply
- Connecting wires
- A switch
- Circuit board
- Bulb holders
Tools Needed
- Multimeter
- Test lamp
- Wire stripper
- Pliers set
- Screwdriver set
Safety Gear Required
- Safety boots
- Protective clothing
- Gloves
- Safety glasses
Construction Steps
-
Gather Materials: Ensure you have all required materials before starting.
-
Safety First: Check that the power supply voltage matches the bulbs you are using.
-
Prepare the Wires: Strip the insulation from the ends of your connecting wires using a wire stripper.
-
Connect the Parallel Circuit:
- Connect one terminal of the first bulb to the positive terminal of the battery.
- Connect the other terminal of the first bulb to the negative terminal of the battery.
- Connect one terminal of the second bulb to the positive terminal of the battery.
- Connect the other terminal of the second bulb to the negative terminal of the battery.
- Both bulbs are now connected in parallel to the same power source.
-
Add a Switch: Connect a switch in series with the positive terminal to control the circuit.
-
Test the Circuit: Close the switch and check that both bulbs light up with full brightness.
In Tanzania, parallel circuits are commonly used in vehicle electrical systems. For example, when wiring headlights, taillights, and the dashboard lighting in a car, each component is connected in parallel to the battery. This ensures that if one light bulb fails (burns out), the other lights continue working, which is crucial for safety when driving at night on roads like the Dar es Salaam to Arusha highway. Similarly, households using solar power systems connect multiple lights and appliances in parallel so that each receives the full voltage and can operate independently.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret circuit diagram
- Select tools, equipment, materials and relevant PPE components
- Construct parallel circuit
- Solder constructed circuits
- Test
- Observe safety precautions
- Clean tools, equipment and work place
- Store tools,
Tathmini ya matokeo
Constructed simple parallel circuits operates as per standards and specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Apply Ohm’s law parallel circuit
- Connect different electrical components in parallel, n circuits
Principles: The student should explain principle of constructing parallel
Theories: The student should explain:
- Characteristics of parallel circuits
- Application of Ohm’s law in parallel circuit
Circumstantial knowledge: about:
- Safety precautions
- First aid
- Workshop rules and regulations
- Waste disposal
Swali
In a parallel circuit, how does the total resistance (RT) compare to the individual resistor values?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado