Mada za sehemu hiiDetermining the characteristics of passive electronic componentsMada 3
- Testing characteristics of resistor
- Testing characteristics of capacitor
- Testing characteristics of inductor
Testing Characteristics of a Resistor
Passive components are electronic devices that perform "passive" operations such as consuming, storing, or releasing supplied electric power. Unlike active components, passive components do not involve the transformation of energy. The three main passive electronic components are resistors, capacitors, and inductors.
A resistor is a passive electronic component that limits or regulates the flow of electric current. It opposes the flow of electricity, and this limiting characteristic is called resistance. The SI unit of resistance is the ohm (Ω).
When current flows through a resistor, the resistor dissipates electric power in the form of heat. This is why resistors often feel warm when used in circuits.
Resistors have coloured bands printed on them to indicate their resistance values. These coloured bands are called resistor colour codes. The number of bands can be three, four, or five.
Colour Code Table
| Colour | Digit | Multiplier | Tolerance |
|---|---|---|---|
| Black | 0 | 1 | |
| Brown | 1 | 10 | ±1% |
| Red | 2 | 100 | ±2% |
| Orange | 3 | 1,000 | |
| Yellow | 4 | 10,000 | |
| Green | 5 | 100,000 | |
| Blue | 6 | 1,000,000 | |
| Violet | 7 | 10,000,000 | |
| Grey | 8 | ||
| White | 9 | ||
| Gold | ±10% | ||
| Silver | ±5% | ||
| None | ±20% |
Three-Band Resistors
In a three-band resistor:
- The first colour indicates the first digit
- The second colour indicates the second digit
- The third colour is the multiplier
- Tolerance is always ±20% (no fourth band)
Worked Example 1: A resistor has brown (first band), black (second band), and orange (third band).
- Brown = 1
- Black = 0
- Orange = ×1,000
Resistance = 10 × 1,000 = 10 kΩ ±20%
Four-Band Resistors
In a four-band resistor:
- First colour = first digit
- Second colour = second digit
- Third colour = multiplier
- Fourth colour = tolerance
Worked Example 2: A resistor has red, violet, green, and gold bands.
- Red = 2
- Violet = 7
- Green = ×100,000
- Gold = ±10%
Resistance = 27 × 100,000 = 2.7 MΩ ±10%
Five-Band Resistors
In a five-band resistor:
- First three colours = first three digits
- Fourth colour = multiplier
- Fifth colour = tolerance
Worked Example 3: A resistor has red, black, black, brown, and brown bands.
- Red = 2
- Black = 0
- Black = 0
- Brown = ×10
- Brown = ±1%
Resistance = 200 × 10 = 2 kΩ ±1%
To verify the colour code value, we use a multimeter. This is a practical activity that proves the accuracy of colour coding.
Procedure
- Select tools: Get a digital or analogue multimeter, colour-coded resistors, and jumper wires.
- Observe safety: Wear gloves, overcoat, and boots as required.
- Calculate: Use the colour code to find the expected resistance value.
- Measure: Set the multimeter to the resistance (Ω) mode. Connect the red probe to one terminal and the black probe to the other.
- Compare: Check if the measured value falls within the tolerance range of the colour-coded value.
- Repeat: Test several different resistors.
- Clean up: Return tools to their proper storage.
Characteristics to Observe
When testing resistors, note the following characteristics:
- The measured value should be within the tolerance range (e.g., ±10% for gold band)
- If the reading is 0 Ω, the resistor is shorted (faulty)
- If the reading shows infinite resistance (OL), the resistor is open (faulty)
- Resistors dissipate heat when current flows through them
Resistors are widely used in modern vehicle electronic systems:
- LED lighting systems: Resistors are used as string resistors to limit current
- Headlight systems: Resistors help control high and low beam switching
- DC/DC converters: These control steering pumps, water pumps, and ABS systems in hybrid and normal vehicles
- Electronic Control Units (ECUs): Resistors are built into integrated circuits for various control functions
Modern vehicles use fewer mechanical devices and more electronic controlling systems, making resistors essential components.
In Tanzania, auto-electricians working in garages or repair shops along roads like Nelson Mandela Road in Dar es Salaam or near the Tanga bus station regularly test resistors when diagnosing faults in vehicle lighting systems, instrument clusters, or ignition systems. For example, when a customer's car headlights are too dim, a mechanic uses a multimeter to test the resistor in the headlight circuit — if the resistor value is wrong, it may cause the LED bulbs to fail prematurely, and replacing the resistor restores proper brightness, saving the owner from buying new bulbs frequently.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select relevant safety gears, tools and equipment
- Identify resistor
- Measure resistance of resistor by using multimeter
- Use color code table to find the value of
- Interpret standard tested results
- Observe safety regulations
- Clean tools, equipment and workplace
- Store tools, components
Tathmini ya matokeo
A tested resistor conforms to specifications as per electronic component data books
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to test Characteristics of resistors
Principles: The student should explain the principles involved in testing Characteristics of resistors
Theories: The student should explain:
- Characteristics of
- resistor symbols
- Applications of
- Factors affecting resistance of
Circumstantial knowledge: about:
- Safety precautions
- electronic component data sheet
Swali
Which statement correctly describes a passive electronic component?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado