Sonzaschool
Rudi

Sekondari ya Kawaida · Kidato cha Pili · Amali · Automotive Engineering

Auto-electric Mechanics

Servicing radiator

takriban dakika 4 kusoma

Majadiliano
Mada za sehemu hiiServicing cooling systemsMada 5

The radiator is a heat exchanger in the cooling system that dissipates heat from the engine coolant into the air, allowing the engine to maintain a safe operating temperature. It consists of tubes and fins that increase the surface area for heat transfer, with coolant added through the radiator pressure cap or expansion tank and drained through a plug at the bottom.

Function of the Radiator

The radiator works by passing hot coolant from the engine through a series of narrow tubes surrounded by thin fins. Air flowing across these fins absorbs heat from the coolant, cooling it before it returns to the engine. This process prevents the engine from overheating during operation. The radiator also has a pressure cap that raises the boiling point of the coolant, allowing the system to operate efficiently under high temperatures.

Servicing the Radiator

Servicing the radiator involves inspecting, cleaning, and testing to ensure it functions properly. The following procedure should be followed under teacher supervision.

Materials Required

  • Coolant
  • New radiator (if replacement is needed)
  • Cotton rags

Tools and Equipment

  • Motor vehicle or stationary engine with cooling system
  • Tool kits
  • Safety gear (gloves, overall, safety boots, safety clear glasses)
  • Service manual
  • Safety stand
  • Draining pan

Procedure Steps

  1. Select tools and materials required for the job.
  2. Observe safety precautions — wear protective gear and ensure the engine is cool before starting work.
  3. Insert wheel stoppers on the motor vehicle wheels to prevent movement.
  4. Open the motor vehicle bonnet and ensure the engine is cool.
  5. Inspect the coolant leakages from the radiator and surrounding hoses.
  6. Set the draining pan underneath the radiator. For saloon cars, jack the vehicle to access the radiator properly.
  7. Open the draining plug from the radiator and remove the radiator pressure cap to drain all coolant completely.
  8. Remove the upper and lower radiator hoses from the radiator.
  9. Remove the radiator fan guide that holds the fan in place.
  10. Remove the radiator from the motor vehicle carefully.
  11. Inspect the radiator fins for condition and check the tubes for any damages. Rectify any issues found.
  12. Flush the radiator by pressurising water from the bottom tank to the top tank to remove debris and scale buildup.
  13. Reinspect the radiator inner tubes. If scales are present, use an additive to soften them.
  14. Inspect the radiator for leakages by pressurising the system or visual inspection.
  15. Refit the radiator onto the motor vehicle in its correct position.
  16. Remount the radiator fan guide to its position.
  17. Connect the radiator top and bottom hoses respectively, ensuring they are securely attached.
  18. Close the radiator draining plug tightly.
  19. Fill the coolant into the radiator to the proper level.
  20. Start the engine and let it run to normal operating temperature.
  21. Switch off the engine and check the coolant level, topping up if necessary.
  22. Reinspect for coolant leakages. If any leaks are found, tighten connections or replace damaged parts.
  23. Close the bonnet and remove the safety stand and wheel stoppers.
  24. Clean tools and working environment and store tools as per workshop regulations.

Key Points to Remember

  • Always ensure the engine is cool before opening the cooling system to avoid burns.
  • Inspect all hoses and connections for cracks, leaks, or wear during servicing.
  • Use the correct coolant type as specified in the vehicle service manual.
  • After refilling, always run the engine and check for leaks while the system is under pressure.

Real-life application

In Tanzania, a mechanic working at a garage in Dar es Salaam or Arusha would regularly service radiators in customer vehicles to prevent engine overheating, especially during hot weather or long-distance travel on highways like the Tanzania-Zambia highway. A taxi driver owning a Nissan Leaf or Toyota Wish would need periodic radiator servicing to ensure the engine stays cool in traffic, preventing costly repairs that could cost upwards of TZS 300,000 to TZS 500,000.

Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa

Tathmini ya mchakato

The student should be able to:

  • Select tools and equipment
  • Use the service manual
  • Locate the radiator
  • Insect components of radiator
  • Check for coolant leakage
  • Repair or replace defective radiator parts
  • Test cooling system performance
  • Observe safety precautions
  • Clean tools, equipment and workplace
  • Store tools and equipment

Tathmini ya matokeo

Serviced radiator functions according to the manufacturer’s service manual books

Tathmini ya maarifa

Knowledge evidence:

Detailed knowledge of:

Method used: The student should explain how to:

  • Service radiator cap

Principles: The student should explain the principles involved in Servicing radiator

Theories: The student should explain:

  • Functions of radiator
  • Possible radiator faults and their causes and remedies

Circumstantial knowledge:

Detailed knowledge about:

  • Safety precautions
  • Manufacture’s service manual book

Swali

What is the primary function of a radiator in a vehicle's cooling system?

Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.

Ingia ili kufanya mazoezi

Mwalimu

Umekwama? Niulize chochote kuhusu mada hii.

Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.

Ingia ili kuuliza

Majadiliano

Hakuna maswali bado

Ingia ili kuuliza
Inapakia majadiliano…