Mada za sehemu hiiHandling accidents and incidentsMada 5
- Handling mechanical hazards
- Handling physical hazards
- Handling chemical hazards
- Handling electrical hazards
- Maintaining safety gears
What is a Machine?
A machine is any device that simplifies work by making tasks easier and faster to complete.
What is a Hazard?
A hazard is anything that has the potential to cause harm. It can be as complex as a heavy machine or as simple as a spilled oil on the floor.
Simple Machine
A simple machine uses human energy to operate. Example: a wheelbarrow used to carry materials around the workshop.
Complex Machine
A complex machine uses external power sources such as electricity, diesel, petrol, or hydraulic power. Examples in auto-body repair include:
- Air compressor
- Brake press machine
- Welding machine
Both types of machines make work easier, but they can also be dangerous if not handled properly.
The following are common sources of hazards in a workshop:
- Moving or revolving parts in a machine
- Unguarded cutters or blades
- Flying or falling objects such as metal chips
- Bare or non-insulated electrical wires
- Welding chips and fumes
- Oil leaks on the floor
- Unsecured machines
- Extreme temperatures from furnaces or ovens
- Vibrations from machines
- Excessive noise
- Dusts and gases from machines
- Cuts — Contact with dangerous unguarded cutters or moving parts
- Electrical shock — Contact with bare wires, which can cause death or fire
- Eye problems — Watching welding without eye protection can cause impaired vision or blindness
- Injuries from moving parts — Rotating parts can catch hands or loose clothing and cause fractures
The following parts can cause injury if not properly guarded:
- Shafts
- Wheels
- Rollers
- Pulleys
- Saw blades
- Drill bits
- Bolts
- Lathe chucks
- Chains
- Placing unprotected hands near dangerous moving cutters
- Working without eye protection when operating lathes or welding
- Placing fingers between machine parts, gears, rollers, or pulleys
- Touching bare electrical wires with bare hands
- Wearing loose clothing that can get caught in rotating parts
Always follow these safety rules when working with machines:
- Before starting a machine, ensure all moving parts are guarded
- Stop the machine before doing any adjustment or maintenance
- Stand at a safe position around the machine
- Wear protective safety gears (helmet, gloves, safety boots, safety glasses)
- Only one person should operate a machine at a time
- Keep rags, cotton waste, and loose garments away from rotating machinery
Use multiple control measures to reduce exposure to hazards:
- Separate the worker and the hazard — Keep a safe distance
- Guard dangerous zones — Use machine guards
- Eliminate the hazard — Remove it completely from the workplace
- Substitute the hazard — Replace with a safer alternative
- Isolate the hazard — Keep it in a separate area
- Use personal protective equipment (PPE) — Wear helmets, gloves, boots, glasses
- Use engineering controls — Install barriers or safety devices
In Tanzania, auto-body repair shops in cities like Dar es Salaam and Arusha use machines such as air compressors and welding equipment. A student working at a local garage in Mwanza must always check that machine guards are in place before operating a compressor, wear safety boots when working near heavy equipment, and keep hands away from rotating pulleys to prevent serious injuries. These habits help prevent accidents and keep the workplace safe.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select relevant safety gears
- Handle mechanical hazards
- Identify causes of health and safety hazards in a workshop and its surroundings
- Take precautions against health and safety hazards
- Maintain safe working environment
- Clean workshop, tools, equipment and workshop surroundings
Tathmini ya matokeo
Mechanical hazards, accidents and incidents handled as per OSHA rules and regulations
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: The student should elaborate how to:
- Identify mechanical hazardous materials
- Handle mechanical hazardous materials and equipment
- Use safety gears
- Use colour code and safety signs
Principles: The student should state the principles of handling mechanical hazardous materials
Theories: The student should:
- State the causes of mechanical hazards
- Explain the advantages of maintaining mechanical hazards in the workshop
Detailed knowledge about:
- Workshop rules and regulations
- NEMC rules and regulation
- OSHA rules and regulations
Swali
Which of the following is the correct definition of a machine as given in the textbook?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado