Mada za sehemu hiiCarrying out vehicle general check-upMada 4
- Checking for damage and set up
- Checking for missing parts, bolts and nuts for tightness
- Checking tyre pressure and wear
- Checking vehicle level
Checking tyre pressure and wear is essential for vehicle safety, fuel efficiency, and tyre longevity. This topic covers how to identify tyre types, understand tyre construction, check inflation, recognise wear patterns, and inspect for damage.
Tyre pressure is the amount of air inside the tyre that provides cushioning and supports the vehicle's weight. Tyres are made of reinforced rubber fitted onto a metal rim to hold pressurised air. Proper pressure is critical — too low or too high causes damage, poor handling, and reduced tyre life. Regular checks ensure safety and extend tyre lifespan.
Tubed Tyres
Tubed tyres contain an inner tube with a valve that allows air to be pumped in and holds the air inside. The tube must fit properly with the tyre to prevent stretching and tearing.
Tubeless Tyres
Tubeless tyres have no inner tube. Air is held directly inside the tyre and rim, with a valve fitted to the wheel rim. They are more common in modern vehicles because they are less likely to lose air suddenly if punctured.
Tyres are made from three main materials:
- Rubbers — natural (from plants) or synthetic (from petroleum). They provide elasticity, flexibility, and resistance to water and wear.
- Fillers — carbon black, silica, or chalk added to rubber to make it stronger and more resistant to cracking.
- Plasticisers — oils and resins that keep the rubber flexible and improve grip on the road.
Bias Ply Tyres
Nylon cords are layered diagonally across the tyre. These tyres have stiff sidewalls and are more resistant to sidewall damage, but they generate more heat and have higher rolling resistance.
Radial Tyres
Cord plies run across the tyre circumference (from one side to the other), wrapped in a steel belt. They are more flexible, provide better comfort, resist heat and water better, and improve fuel economy. Most modern vehicles use radial tyres.
The tyre sidewall carries important information including:
- Tyre width in millimetres (e.g., 185)
- Aspect ratio (percentage of width that is sidewall height, e.g., 70)
- Wheel diameter in inches (e.g., 14)
- Construction type (R for radial)
- Speed rating (e.g., H, V)
- Manufacturer date and recommended inflation pressure
Example: A tyre marked "185/70 R 14 H" means: 185 mm width, 70% aspect ratio, radial construction, 14-inch wheel, and speed rating H.
Inflation is the process of pumping air into the tyre using a compressor. Pressure is measured in psi (pounds per square inch), bar, or kPa. The correct pressure is specified by the vehicle manufacturer and is usually found on a sticker inside the driver's door or in the owner's manual.
Worked Example: If a tyre's recommended pressure is 32 psi, and the gauge reads 28 psi, the tyre is underinflated by 4 psi and needs air added.
Tyre wear is the gradual loss of tread pattern caused by friction between the tyre and road surface. Driving habits, road conditions, wheel alignment, and tyre maintenance all affect wear rate.
Even Wear
The tread wears down evenly across the entire surface. This results from correct pressure, regular tyre rotation, and proper wheel alignment.
Uneven Wear
Treads wear more on one side or in spots. Causes include:
- Underinflation or overinflation
- Wheel misalignment
- Hard braking
- Worn suspension components
Common types of tyre damage include:
- Punctures — holes from nails or sharp objects
- Cuts — gashes on tread or sidewall from sharp objects
- Bulges — bubble-like swelling indicating internal cord damage, often from hitting potholes
- Cracks — small cracks on sidewalls or tread from age, sunlight, or dryness
Follow these steps under teacher supervision:
- Wear personal protective equipment (gloves, safety boots, goggles).
- Park the vehicle on a flat, safe area and apply wheel chocks.
- Clean the tyre valve head.
- Attach the pressure gauge firmly to the valve and read the pressure.
- Compare the reading with the manufacturer's recommended pressure.
- Inflate or deflate as needed.
- Loosen wheel nuts, jack the vehicle, and remove the wheel.
- Check for:
- Uneven tread wear patterns
- Tread depth using a gauge (minimum legal depth is 1.6 mm)
- Cuts or punctures on tread and sidewalls
- Bulges or deformities
- Cracks on tread and sidewalls
- Refit the wheel, lower the vehicle, and tighten nuts properly.
In Tanzania, commercial drivers and taxi owners in cities like Dar es Salaam and Arusha regularly check tyre pressure at petrol stations before long trips to Mwanza or Mbeya. A driver whose tyres are underinflated spends more fuel — with petrol costing around TSh 2,500 per litre, proper tyre pressure can save tens of thousands of shillings in fuel costs over a month. Additionally, worn tyres inspected before the rainy season can prevent accidents on poorly maintained rural roads.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Perform general checkup and set up
- Identify missing wheel or wheel nuts
- Identify loosen wheel nuts
- Identify tyre tear and wear
- Identify miss alignment
- Learn inspection procedures
- Check tyre wear and pressure
- Perform tyre inflation
- Use checklist
- Use manufactures manual
- Operate various tools, equipment and machines
- Clean tools and equipment
- Store tools and equipment in safe custody
Tathmini ya matokeo
Tyre condition and pressure conform to manufacturer’s specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: The student should describe how to:
- Inspect tyre wear
- Inspect cracks
- Inspect for loosening wheel nuts
- Check for tyre pressure
- Inflate tyre
Principles: The student should explain the principles of checking tyre wear and pressure
Theories: The student should:
- Define the concept of tyre wear and pressure inflation
- Explain wheel and tyre
- Elaborate type of tyre
- Enumerate materials used in tyre construction
- Reveal tyre damages and cracks
- Explain tyre wear
- Explain tyre inflation
- Analyse tyre specifications Circumstantial Detailed knowledge
- Safe handling of vehicle
- Vehicle inspection as per technical specifications
- Parts tightening specifications
- Safety rules and regulations
Swali
What are the two main types of tyres used on vehicles?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado