Mada za sehemu hiiHandling fire accidentsMada 2
- Handling firefighting equipment and materials
- Handling different types of fire
Handling Firefighting Equipment and Materials
Fire is the rapid chemical reaction of burning materials that produces heat and light. For fire to start and continue burning, three elements must be present together — this is called the fire triangle:
- Fuel — any material that can burn (wood, petrol, oil, paper)
- Heat — a source of ignition (spark, flame, hot surface)
- Oxygen — air that supports combustion
If any one of these three elements is removed, the fire goes out. This principle guides all firefighting methods.
Fires are grouped into classes according to the type of material that is burning. Using the wrong extinguisher on a fire can make the situation worse.
| Class | Type of Fire | Common Examples |
|---|---|---|
| Class A | Solid materials | Wood, paper, textiles, grass |
| Class B | Flammable liquids | Petrol, diesel, oil, grease |
| Class C | Gases | LPG, methane, propane |
| Class D | Metals | Magnesium, aluminum, sodium |
| Class E | Electrical equipment | Live electrical appliances, wiring |
| Class F | Cooking oils | Cooking oil, fats in the kitchen |
Important: In a motorcycle workshop, you will mostly deal with Class A (paper, rags), Class B (oil, fuel), and Class E (electrical) fires.
Different extinguishers work on different classes of fire. Always match the extinguisher to the type of fire.
- Water extinguisher — Class A only. Never use on oil, electrical, or gas fires.
- Dry chemical powder (ABC powder) — Classes A, B, C, and E. Multi-purpose extinguisher suitable for most workshop fires.
- Carbon dioxide (CO₂) extinguisher — Class E (electrical fires). Leaves no residue.
- Foam extinguisher — Classes A and B. Good for liquid fires.
- Wet chemical extinguisher — Class F. For cooking oil fires.
Look for the colour code and label on the extinguisher:
- Red — Water
- Blue — Dry powder
- Black — CO₂
- Cream — Foam
- Yellow — Wet chemical
Also read the label to confirm which class of fire it can extinguish.
This is the correct way to use a portable fire extinguisher:
- Pull the safety pin from the handle.
- Aim the nozzle at the base of the fire, not the flames.
- Squeeze the handle to release the extinguishing agent.
- Sweep the nozzle from side to side at the base of the fire until it is fully extinguished.
Worked Example
In a motorcycle workshop, a small fire starts on a workbench where oily rags have caught fire. What should you do?
- Alert others and shout "Fire!"
- Identify the class of fire: This is Class B (flammable liquid/oil).
- Select the correct extinguisher: Dry chemical powder or foam extinguisher.
- Remember PASS: Pull pin → Aim at base → Squeeze handle → Sweep side to side.
- If the fire is too large, evacuate immediately and call the fire brigade.
- Check that the extinguisher is the correct type for the fire.
- Remove the safety pin.
- Hold the discharge hose firmly.
- Squeeze the lever to release the agent.
- Direct the stream at the base of the flames.
- Sweep across the fire until it is out.
- Watch for re-ignition and be ready to use it again if needed.
Proper storage ensures equipment is ready when needed:
- Keep fire extinguishers in designated places, mounted on walls or in brackets.
- Ensure extinguishers are easily accessible — never block them with tools or materials.
- Store extinguishers upright, not lying down.
- Keep safety gears (gloves, safety boots, overalls, safety glasses) in a clean, dry storage area.
- Check extinguishers monthly to ensure the pressure gauge is in the green zone.
- Keep the area around fire equipment clear of clutter.
- Attack from the direction of the wind — move toward the fire from upwind.
- Extinguish liquid fires from the top down — aim at the source of the dripping liquid.
- Extinguish wall fires from the bottom up — start at the base of the fire.
- Use several extinguishers together if one is not enough — do not wait until one fails.
In Tanzania, motorcycle repair shops in towns like Arusha, Mwanza, or Dar es Salaam handle flammable fuels and oils daily. If a fuel spill catches fire during repairs, a mechanic who knows how to identify the fire class and use the correct ABC powder extinguisher using the PASS method can prevent a small accident from destroying the entire workshop and protect nearby people and property worth millions of Tanzanian shillings.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools, equipment and safety gears
- Identify common classes of fire
- Handle different types of fire
- Check and test fire extinguishers
- Observe safety precaution
- Store firefighting, 17 materials equipment and safety gears correctly
Tathmini ya matokeo
Fire fighiting maintained as per safety rules and regulations
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Handle firefighting equipment and materials
- Apply the right type of fire extinguishers
- Apply right type of firefighting
Principles: The the principles of:
- Identifying different type of fire extinguishers
- Checking and testing fire
- Applying right class of fire
Theories: The student should explain: -
- Types and common classes
- Handle different types of fire
- Importance of checking and servicing fire differentiate
- Safety precautions while handling fire accidents
- Safe handling of tools and equipment
- Waste disposal methods
Swali
What three elements must be present together for fire to start and continue burning?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado