Mada za sehemu hiiCarrying out risk assessmentMada 2
- Controlling risk
- Managing safety gears
Controlling Risk in Motorcycle Mechanics
Controlling risk means taking action to reduce or eliminate dangers identified during risk assessment in the workshop. After you have identified hazards and evaluated their risks, the next step is to apply control measures that protect you and others from harm. The goal is to make the workshop as safe as possible before, during, and after motorcycle repair work.
Risk controls are applied in order of effectiveness, from most effective to least effective. This sequence is called the hierarchy of controls.
1. Elimination
Remove the hazard completely from the workplace. This is the most effective method because the danger no longer exists.
- Example: Removing a broken motorcycle part from the workbench instead of leaving it where someone could trip over it
2. Substitution
Replace a hazardous tool, material, or process with a safer alternative.
- Example: Using a battery-powered torque wrench instead of a pneumatic one to reduce noise exposure
3. Engineering Controls
Modify the workplace or equipment to isolate people from the hazard.
- Example: Installing a exhaust gas extractor in the workshop to remove harmful fumes
4. Administrative Controls
Change work procedures or rules to reduce exposure to hazards.
- Example: Rotating tasks among workers so no one is exposed to loud noise for too long
5. Personal Protective Equipment (PPE)
Use protective gear when other controls cannot fully eliminate the hazard. PPE is the last line of defense.
- Example: Wearing gloves when handling hot engine parts
PPE must be worn correctly for maximum protection:
| PPE | Purpose |
|---|---|
| Safety glasses/goggles | Protects eyes from flying debris, oil, and chemical splashes |
| Ear plugs/muffs | Protects hearing from engine noise |
| Gloves | Protects hands from cuts, burns, and chemicals |
| Dust mask/respirator | Protects lungs from fumes, dust, and asbestos |
| Safety boots | Protects feet from falling objects and oil spills |
| Overalls/coveralls | Protects skin and clothing from dirt and chemicals |
Always inspect PPE before use. Damaged equipment must be replaced immediately.
A Form 4 student at Mwanza Technical College identified the following hazard during risk assessment:
Hazard: Removing a motorcycle tire using a tire iron can cause the tire iron to slip and strike the mechanic's hand.
Control measures applied in order:
- Elimination — Not possible; the tire must be removed for repair.
- Substitution — Use a tire-changing machine if available instead of manual tire irons.
- Engineering Controls — Install a tire cage to contain the wheel during removal.
- Administrative Controls — Train all mechanics on proper tire iron technique and establish a rule to never use worn-out tire irons.
- PPE — Wear heavy-duty gloves and safety glasses during tire removal.
In this example, the student applied multiple control measures, with PPE as the final protection.
When controlling risk, always follow these steps:
- Review your risk assessment sheet to confirm identified hazards.
- Apply the highest-level control that is reasonably practicable.
- Implement engineering or administrative controls where possible.
- Provide appropriate PPE and train workers on its correct use.
- Monitor the controls regularly to ensure they remain effective.
- Review controls if new hazards emerge or work methods change.
- Controlling risk is the process of applying measures to reduce or eliminate identified hazards.
- Use the hierarchy of controls: Elimination → Substitution → Engineering Controls → Administrative Controls → PPE.
- PPE is the last line of defense and must be used correctly.
- Always monitor and review your controls to maintain a safe workshop environment.
In Tanzania, a motorcycle taxi (bodaboda) mechanic in Dar es Salaam or Mwanza uses risk control every day when repairing motorcycles. For example, before repairing a customer's motorcycle, the mechanic may identify that the brake fluid is corrosive and can harm the skin. By wearing gloves and overalls (PPE), working in a well-ventilated area (engineering control), and following workshop safety rules (administrative control), the mechanic prevents injury while earning a living — protecting both their health and their ability to work.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret service manuals
- Select tools and equipment
- Supervise practice safe workshop practices to protect yourself, other and properties
- React correctly and safely when faced with an emergency
- Identify and apply correctly all emergency equipment and supplies
- Make periodic inspections of workshop area and all equipment and prepare report
- Conduct safety training
- Identify any safety hazard material
- Handle hazard material correctly
- Prepare universal workshop colour codes and know what the colour represents
- Make out and file safe report
- Be aware of the dangerous of compressed air
- Ensure availability of personal protective equipment
- Supervise compressed air rules
- Monitor good environmental practices
- Clean tools and equipment
- Store tools and equipment
Tathmini ya matokeo
Risk controlled as per OHS guidelines
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Control risk
- Identify risks
Principles: The student should explain the principles of: Controlling risk
Theories: The student should explain: -
- Impotence of controlling risk
- Inspecting workshop areas tools and equipment
Detailed knowledge about: Safety precautions while controlling risk Safe handling of tools and equipment
Swali
What is the correct order of the hierarchy of risk controls, starting from the most effective method?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado