Sonzaschool
Rudi

Sekondari ya Kawaida · Kidato cha Nne · Amali · Automotive Engineering

Motor-cycle Mechanics

Performing job cost calculations

takriban dakika 4 kusoma

Majadiliano
Mada za sehemu hiiEstimating material and labour costMada 3

Performing Job Cost Calculations

When a customer brings a motorcycle for repair, the workshop must calculate how much to charge for the job. Job cost calculation is the process of adding up all the expenses for a specific repair job — including parts, labour, and any extra costs — so the workshop can set a fair price and know if they are making a profit.

In motorcycle mechanics, accurate job costing helps the technician give the customer a correct estimate, order the right parts on time, and run the workshop profitably.


Every repair job has three main cost components:

1. Material Cost (Parts Cost)

This is the cost of all spare parts and consumables needed for the job. To calculate material cost:

  • Check the job card to see which parts are required
  • Refer to the price list or supplier's catalogue for current prices
  • Multiply the quantity needed by the unit price of each part

Material Cost=Quantity×Unit Price (for each part)Material\ Cost = Quantity \times Unit\ Price\ (for\ each\ part)

Then add up all individual part costs:

Total Material Cost=Part A+Part B+Part C+...Total\ Material\ Cost = Part\ A + Part\ B + Part\ C + ...

2. Labour Cost

This is the payment for the time the technician spends working on the motorcycle. To calculate labour cost:

  • Determine how many hours the job will take (check the job card or estimate based on experience)
  • Know the hourly labour rate (the workshop's standard charge per hour)

Labour Cost=Number of Hours×Hourly RateLabour\ Cost = Number\ of\ Hours \times Hourly\ Rate

3. Overhead Cost (On-costs)

Overheads are indirect costs that keep the workshop running — tools, electricity, rent, lighting, and small consumables like oil or cleaning rags. A simple way to add overheads is to apply a percentage markup on the material or labour cost.

For example, if the workshop adds 10% overhead on material cost:

Overhead Cost=Total Material Cost×10%Overhead\ Cost = Total\ Material\ Cost \times 10\%


Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa

Tathmini ya mchakato

The student should be able to:

  • Select tools and equipment.
  • Read inspection report.
  • Prepare material cost estimates
  • Prepare overhead costs
  • Prepare material request.
  • Prepare quotations and distribute into various shops
  • Obtain proforma invoice from different shops
  • Prepare job costing including other overheads

Tathmini ya matokeo

Job cost calculations performed as per workshop guidelines

Tathmini ya maarifa

Knowledge evidence:

Detailed knowledge of:

Method used: The student should explain how to Perform job cost calculations

Principles: The student should explain the principles of: Performing job cost calculations

Theories: The student should explain: Importance of performing job cost calculations

Detailed knowledge about:

  • Safety precautions while Performing job cost calculations
  • Safe handling of materials and documents

Swali

What are the three main cost components that make up the total job cost in motorcycle repair?

Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.

Ingia ili kufanya mazoezi

Mwalimu

Umekwama? Niulize chochote kuhusu mada hii.

Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.

Ingia ili kuuliza

Majadiliano

Hakuna maswali bado

Ingia ili kuuliza
Inapakia majadiliano…