Mada za sehemu hiiPerforming cuttingMada 3
- Performing straight sawing
- Performing angular sawing
- Performing chiselling
Performing Angular Sawing
Angular sawing is the process of making cuts in a material at specific angles other than a 90-degree straight cut. It involves using a saw or cutting tool that is adjusted to create beveled or angled cuts. This skill is essential in agro-mechanics for cutting metal, wood, or plastic components at precise angles needed for repair and fabrication work.
Angle Adjustment
To perform angular sawing, you need to adjust the cutting tool to the desired angle. Common angles include:
- Acute angle – less than 90 degrees
- Right angle – exactly 90 degrees
- Obtuse angle – greater than 90 degrees
A hacksaw can be used to cut at 45°, 90°, 135°, and 180° angles by adjusting the blade position or the workpiece orientation.
Precision
Angular sawing requires a high level of precision to ensure cuts are accurate and match the specified angles. This precision is essential for achieving proper fit and functionality in construction or repair projects.
Safety
Safety precautions are crucial when working with angular sawing tools. Improper use can result in accidents and injuries.
| Tools/Equipment | Materials | Safety Gears |
|---|---|---|
| Work bench | Cotton waste | Safety Boots |
| Angle grinder | Workpiece (material to be cut) | Overall |
| Bench vice | Drill bits | Leather gloves |
| Protractor | Safety goggles |
Step 1: Prepare the Work Area
- Ensure the work bench is clean and stable
- Secure the workpiece firmly in the bench vice
- Wear all required personal protective equipment (PPE)
Step 2: Mark the Cut Line
- Use a steel ruler, scriber, and protractor to mark the desired angle on the workpiece
- Ensure the marking is clear and accurate
Step 3: Set the Angle
- Adjust the hacksaw or angle grinder to the required angle
- For a 45° cut, position the workpiece at the correct angle in the vice
Step 4: Perform the Cut
- Start the cut at the marked line
- Apply steady and even pressure
- Maintain the correct angle throughout the cut
Step 5: Complete the Cut
- When the blade has almost cut through, support the piece with your hand to prevent it from dropping
- This prevents damage to the workpiece and injury
Step 6: Finish and Inspect
- Examine the cut to ensure it matches the required angle
- Use a file to smooth any rough edges
When the blade becomes blunt:
- If a blade breaks or becomes blunt before completing a cut, do not continue with a new blade in the same cut
- The slot made by the dull blade becomes narrower, causing the new blade to stick and ruin
- If possible, rotate the workpiece and start a new cut from the other side
- If the material cannot be rotated, start a new cut next to the first cut
Blade maintenance:
- Release the tension on the blade before storing the hacksaw
- This prevents the frame from losing its spring
- DO NOT test blade sharpness by running your finger across the teeth — you will get cut
- DO NOT wipe chips away with your hand — the burr on the cut surface is sharp and can cause serious cuts
- Store the hacksaw carefully so you do not accidentally grasp the teeth when picking it up
- If you are right-handed, cut on the right-hand side of the vice; if left-handed, cut on the left-hand side
- This positioning prevents injury if the blade breaks during the cutting stroke
Take a piece of 10 mm flat bar × 200 mm long. Select a proper blade and cut the flat bar into six lengths of about 30 mm each at the specified angles. Ask your teacher to check your work.
In Tanzania, angular sawing is used in workshops for repairing agricultural equipment such as plow components, irrigation system fittings, and motorcycle frames. For example, a mechanic in Mwanza repairing a water pump housing may need to cut a metal bracket at a 45° angle to fit properly, ensuring the pump operates efficiently during the dry season when farmers rely on irrigation.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret drawings.
- Select tools and equipment.
- Take measurements.
- Cut work piece.
- Check for accuracy.
- Observe safety precautions.
- Clean tools, work piece and work place.
- Store tools, equipment and workplace.
Tathmini ya matokeo
Angular sawing performed as per provided worksheet
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how: perform angular sawing
Principles: The the principles of: Performing angular
Theories: The student should explain:
- Application of different materials Uses of cutting tools and equipment
- Safety precautions while performing angular sawing process.
- Safe handling of work tools and Proper waste disposal
Swali
What is the meaning of angular sawing?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado