Mada za sehemu hiiPerforming TIG and MIG weldingMada 2
- Performing TIG welding
- Performing MIG welding
TIG (Tungsten Inert Gas) welding is a precision gas-shielded arc welding process that uses a non-consumable tungsten electrode to create an electric arc, with an inert gas shielding the weld pool from contamination. This produces high-quality, clean welds with excellent control, making it ideal for thin materials and detailed work.
TIG welding, also known as Gas Tungsten Arc Welding (GTAW), joins metals by:
- Creating an electric arc between a non-consumable tungsten electrode and the workpiece
- Using an inert gas (usually argon) to shield the weld zone from atmospheric contamination
- Manually adding filler metal to the weld pool as needed
This process produces strong, slag-free welds that retain the corrosion resistance of the parent metal.
- Produces high-quality, clean welds with excellent appearance
- Provides precise control over heat input
- Suitable for thin materials without burning through
- No slag formation, reducing post-weld cleaning
- Can weld a variety of metals including carbon steel, stainless steel, and aluminum
- Can be performed in multiple positions (flat, horizontal, vertical, overhead)
The essential equipment includes:
- Constant current welding power supply – provides stable current for consistent welding
- Welding torch with non-consumable tungsten electrode – creates and maintains the arc
- Shielding gas source – usually argon cylinder with regulator and flow meter
- Filler rods – added manually to the weld pool
- Ground clamp – completes the electrical circuit
- Tungsten grinding wheel – for preparing the electrode tip
- PPE – welding helmet, leather gloves, leather apron, safety boots, clear goggles
The TIG welding process works as follows:
- An electric arc is established between the non-consumable tungsten electrode and the base metal
- The electrode does not melt; only the workpiece melts at the point of contact with the arc
- This creates a molten weld pool
- Filler rod is fed directly into the molten pool, where it melts and fuses with the base metal
- The inert shielding gas protects the hot tungsten and the molten weld metal from oxygen contamination
- No fluxes are used, so welds are sound and slag-free
Follow these steps to prepare for TIG welding:
-
Connect the torch – Attach the air-cooled torch to the front of the welding machine using the adapter provided
-
Install remote controller – If using a remote controller, plug it into the welding machine
-
Attach earth clamp – Connect the earth clamp to the welding machine, ensuring correct polarity according to the base material and filler metal
-
Prepare tungsten electrode – Grind the tungsten electrode to a point using a finer grinding wheel dedicated to tungsten preparation
-
Insert electrode – Place the tungsten electrode into the collet, ensuring the correct stick-out length to optimize arc performance
-
Check power supply – Verify that the power supply matches the equipment rated requirements (commonly 220V)
-
Select shielding gas – Ensure the shielding gas is suitable for the base material and filler metal combination (pure argon is common for steel)
-
Ready to weld – With equipment correctly set up, you can now begin welding
When performing TIG welding:
-
Starting the arc – Strike the arc by touching the torch to the workpiece; a high-frequency generator creates a spark that initiates the arc while keeping the electrode and workpiece separated
-
Creating the weld pool – Move the torch in a circular motion; the pool size depends on electrode size and current settings
-
Adding filler metal – Manually feed filler rod to the leading edge of the weld pool as required
-
Ending the weld – Reduce the arc current at the end to solidify the weld crater and prevent cracking
In Tanzania, TIG welding skills are valuable for repairing agricultural equipment such as irrigation pump housings, fertilizer applicator frames, and tool handles. A small-scale metal fabrication workshop in Arusha might use TIG welding to produce custom gate panels or repair broken farm machinery parts, earning income by providing welding services to local farmers whose equipment has cracked or broken during field operations.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
Students should be able to:
- Select tools and equipment.
- Use TIG equipment.
- Perform TIG welding
- Inspect weld metal defects.
- Observe safety precautions.
- Clean tools, equipment and work place.
- Store tools and equipment
Tathmini ya matokeo
TIG Welded work piece conforms to technical specifications.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: Students should explain how to apply TIG welding techniques.
Principles: Students should explain the principle of:
- TIG welding.
Theories: Students should explain:
- Types of TIG and filler wires and nozzles.
- The importance of high frequency starting unit.
- The difference between TIG and MIG welding techniques.
- Use of cleaning acid.
- Types of materials for TIG
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions while performing TIG welding.
- Safe handling of work tools, equipment and work piece
- Waste disposal
Swali
What does TIG stand for in TIG welding?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado