Mada za sehemu hiiServicing harvestersMada 2
- Servicing trailed harvesters
- Servicing self-propelled harvesters
Servicing Self-Propelled Harvesters
Self-propelled harvesters are combine harvesters that have their own engine and wheels, allowing them to move independently in the field without being pulled by a tractor. Regular servicing ensures these machines work efficiently, last longer, and avoid costly breakdowns during harvest time.
A self-propelled harvester is a complex agricultural machine that harvests crops, threshes grain, and cleans the harvest all in one operation. Unlike trailed harvesters that need a tractor to move, self-propelled harvesters have their own engine, transmission, and wheels for movement.
Before starting any service work, always follow these safety rules:
- Wear protective clothing: overall, safety boots, gloves, and safety goggles
- Ensure the engine is switched off and the key is removed
- Allow the engine to cool down before checking hot components
- Use jack stands or lifting trolleys when working under the machine
- Keep the work area clean and free of oil spills to prevent slipping
- Disconnect the battery before electrical work
1. Pre-Service Inspection
Before beginning actual servicing, visually inspect the harvester:
- Check for loose bolts, nuts, and fasteners
- Look for oil leaks on the ground beneath the machine
- Inspect belts and hoses for cracks or wear
- Check tire pressure and condition
- Examine the cutting header for damage or worn parts
2. Engine Servicing
- Engine oil: Check the oil level using the dipstick. If low, add oil to the recommended level. Change oil after every 100-200 hours of operation.
- Coolant: Inspect the coolant level in the radiator. Top up with clean water or coolant mixture if needed.
- Air filter: Remove and clean the air filter. Replace if too dirty or damaged. A dirty air filter reduces engine performance.
3. Lubrication
Use the grease gun and oil can to lubricate moving parts:
- Grease all grease points on the header, auger, and elevator chains
- Oil the chain drives and pivot points
- Apply oil to cutter bar blades to prevent rust and ensure smooth cutting
4. Hydraulic System Check
- Check hydraulic oil level in the reservoir
- Inspect hydraulic hoses for leaks or damage
- Test hydraulic controls for proper operation
5. Cutting Header Maintenance
- Adjust the reel tines if worn or bent
- Check the cutter bar height adjustment
- Inspect and sharpen or replace cutting blades
- Clean the header from crop residue
6. Threshing and Cleaning System
- Check the concave clearance and adjust if necessary
- Inspect the sieve plates for wear or blockages
- Clean the grain tank and unloading auger
- Check the fan speed adjustment
7. Electrical System
- Test all lights and warning indicators
- Check battery terminals for corrosion and tighten connections
- Verify the horn and reverse alarm work properly
After completing all service tasks:
- Start the engine and let it run for a few minutes
- Check for any unusual noises or vibrations
- Test all hydraulic functions
- Verify that all guards are properly installed
- Clean any spilled oil or grease from the machine
| Service Item | Daily Check | Every 50 Hours | Every 100 Hours |
|---|---|---|---|
| Engine oil level | ✓ | ||
| Coolant level | ✓ | ||
| Air filter | ✓ | Clean/Replace | |
| Grease points | ✓ | ||
| Oil change | ✓ | ||
| Hydraulic oil | Check/Replace |
In Tanzania, small-scale farmers in regions like Morogoro or Mbeya often hire self-propelled harvesters during the maize or wheat harvest season. If a harvester breaks down because it was not properly serviced, the farmer loses valuable harvest time and may face financial losses. A well-serviced harvester can harvest about 2-3 hectares per day, saving farmers approximately TZS 150,000-200,000 in labor costs compared to manual harvesting. Knowing how to service these machines also creates job opportunities as a farm machinery technician in local agro-mechanic workshops.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
Students should be able to:
- Select tools and equipment.
- Inspect self-propelled harvesters and components.
- Dismantle self-propelled harvesters and components.
- Identify defects.
- Service self-propelled harvesters and components.
- Assemble self-propelled harvesters components.
- Perform relevant adjustments.
- Observe safety precautions
- Test self-propelled harvesters.
- Clean tools, equipment and work place.
- Store tools and equipment.
Tathmini ya matokeo
Serviced self-propelled harvester conforms to technical specifications.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: Students should explain how to:
- Inspect self-propelled harvester faults.
- Dismantle and assemble self-propelled harvester components.
- Service self-propelled harvester.
- Test self-propelled harvester
Principles: Students should explain the principle of:
- Self-propelled harvester construction.
- Dismantling and assembling self-propelled harvester components.
- Servicing self-propelled harvester.
Theories: Students should explain:
- Self-propelled harvester construction.
- Different types of self-propelled harvester.
- Procedures of servicing self-propelled harvester.
- The harvesting mechanism.
- Procedure for testing self-propelled harvester
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions while performing service of self-propelled harvester.
- Safe handling of working tools and equipment.
- Waste disposal.
Swali
What should a technician do BEFORE starting any service work on a self-propelled harvester?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado