Mada za sehemu hiiOperating agricultural machineryMada 2
- Performing pre-operation checks and tractor driving
- Operating tractor attachments and implements
A tractor does most of its work through the implements attached to it. Operating implements means hitching them correctly, connecting their drive, setting them, using them safely in the field and looking after them.
- Implement: a machine that the tractor carries, pulls or drives, such as a plough, harrow, planter, sprayer or trailer
- Mounted implement: carried fully on the tractor's three-point linkage
- Trailed implement: runs on its own wheels and is pulled from the drawbar
- Three-point linkage: two lower lift arms and one top link at the back of the tractor, raised and lowered by the hydraulic system
- Drawbar: the single pulling point low down at the back of the tractor
- Power take-off (PTO): a splined shaft at the back of the tractor that drives the working parts of an implement
| Group | Examples | How attached |
|---|---|---|
| Tillage machinery | Disc plough, mouldboard plough, harrow, rotavator | Three-point linkage (the rotavator also uses the PTO) |
| Planting machinery | Seed drill, planter | Three-point linkage or drawbar |
| Weeding machinery | Cultivator, inter-row weeder | Three-point linkage |
| Spraying machinery | Boom sprayer | Three-point linkage and PTO |
| Fertilizing machinery | Fertilizer spreader, manure spreader | Three-point linkage or drawbar, with PTO |
| Trailed machinery | Trailer, trailed harrow | Drawbar |
- Read the tractor's and the implement's service manuals. They show, with drawings, the linkage points, the PTO speed and the settings.
- Check the tractor: fuel, engine oil, coolant, hydraulic oil, tyre pressure and brakes. The hydrometer in the tool kit is for checking the battery.
- Check the implement: no loose or missing bolts, worn parts or damaged guards
- Collect the tools: tool kit, wheel spanners, jack, grease pump and oil can
- Wear an overall, safety boots, gloves and clear glasses. Do not wear loose clothing.
- Reverse the tractor slowly and squarely towards the implement until the lower links are level with the implement's hitch pins
- Stop, put the gear in neutral, apply the parking brake and stop the engine before anyone steps between the tractor and the implement
- Fit the left lower link onto its pin and lock it with a linch pin
- Fit the right lower link, using the levelling handle to bring it to the right height, and lock it
- Fit the top link and lock it
- Start the engine and raise the implement a little. Tighten the check chains or stabilisers so that it cannot swing against the tyres.
- Level the implement from side to side with the levelling handle, and from front to back by lengthening or shortening the top link
To remove the implement, lower it onto firm, level ground and take off the links in the opposite order: top link first.
- Check that the implement's weight and the load are within what the tractor may pull
- Raise or lower the implement's tongue with its jack until it is level with the drawbar
- Reverse slowly until the holes line up. Stop, apply the parking brake and stop the engine.
- Drop the hitch pin through and lock it with a safety clip
- Wind up the jack stand and fix it in its travel position
- Connect the safety chain, and any hydraulic hoses, brake lines and lights
Always pull from the drawbar. Never hitch a load to the top link point or to the axle: pulling from a high point can turn the tractor over backwards.
- Stop the engine and make sure the PTO lever is disengaged
- Hitch the implement first, on the linkage or the drawbar
- Clean and lightly grease the splines of the PTO shaft
- Press the locking pin, slide the drive shaft onto the PTO until the pin clicks, then pull it to make sure it is locked
- Check that the guard covers the whole shaft and fasten its chain so that the guard does not turn
- Raise and lower the implement and check that the shaft neither comes apart nor pushes hard at any position
- Use the PTO speed given in the manual. Most implements use 540 revolutions per minute.
- Engage the PTO at low engine speed, with the working parts just clear of the ground, then bring the engine up to working speed and lower the implement as the tractor moves forward
- Disengage the PTO before turning sharply, before lifting the implement high and before getting off the tractor
- Load the trailer evenly, with a little more weight in front of its axle than behind, and do not overload it
- Tie the load down
- Start off gently, drive slowly and brake early: a loaded trailer pushes the tractor
- Take corners wide and slow
- Go down hills in a low gear, the same gear you would use to climb them
- When reversing, turn the steering wheel the opposite way to where the trailer must go, and use a helper who stands where the driver can see him
- Never carry people on the drawbar or on top of a load
- Set the working depth with the hydraulic control lever and, where fitted, the implement's depth wheel
- Choose a gear that lets the engine pull without labouring
- Lift the implement out of the ground before turning at the end of the field
- Stop and switch off before clearing a blockage or making an adjustment
- Listen and watch for unusual noise, vibration or uneven work
Preventive maintenance is care given before anything breaks. It keeps implements working accurately, prevents breakdowns in the middle of the season, makes them last longer and keeps them safe.
| When | What to do |
|---|---|
| Every day of use | Clean off soil and plant material; check bolts, pins and guards; grease all grease points; check tyre pressure of trailed implements |
| Every week of use | Check wear on shares, discs, tines and blades; check tension of belts and chains; check gearbox oil level |
| After spraying or spreading fertilizer | Wash out the tank, pipes and nozzles or the hopper with clean water |
| End of the season | Replace worn parts; tighten everything; coat bright metal parts with oil or grease against rust; store under a roof on wooden blocks |
Always follow the schedule in the implement's service manual.
- Only one person on the tractor, in the seat
- Keep everyone away from the implement and the PTO shaft when the engine is running
- Never step over a turning PTO shaft and never use one without its guard
- Never stand between the tractor and the implement while the tractor is moving
- Lower the implement to the ground before leaving the tractor
- Never work under a raised implement unless it is supported on stands or blocks
- Wash the tractor and implement, clean the tools and return them to the tool kit
- Park implements on level ground under cover, lowered or on blocks
- Collect used oil and old grease in a closed container and put oily rags in a covered bin
- Wash water from a sprayer must not run into a river, well or dam, and empty chemical containers are never used again for food or water
- The operator reads the manual: the rotavator is fully mounted and needs a PTO speed of 540 revolutions per minute
- He reverses to the rotavator, stops the engine and fits the left lower link, the right lower link and the top link, locking each with a linch pin
- He connects the PTO shaft until the locking pin clicks, and checks the guard and its chain
- He starts the engine, raises the rotavator a little, tightens the check chains and levels the machine
- At the start of the row he engages the PTO at low engine speed with the blades just clear of the ground, brings the engine up to speed, and lowers the rotavator as he moves forward
- At the end of the row he lifts the rotavator, turns, and lowers it again
- After the work he disengages the PTO, lowers the rotavator, stops the engine, cleans the blades and greases the bearings
A group of farmers shares one tractor. An operator who can change quickly and safely from a plough to a harrow, a planter and a trailer lets the same tractor prepare the land, plant it and carry the harvest home. Because he greases and checks each implement every day, the machines do not break down in the few weeks when every farmer needs them.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
Students should be able to:
- Interpret technical drawings.
- Use service manuals.
- Select tools and equipment.
- Observe safety precautions
- Hitch at single and three point linkage.
- Attach trailed implements to drawbar.
- Attach driven implements to P.T.O.
- Operate agricultural machinery with trailer.
- Clean tools, equipment and work place.
- Store tools and equipment.
Tathmini ya matokeo
Agricultural Implements operated according to technical Specifications.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: Students should explain how to:
- Operate agricultural machine implements.
- Undertake agricultural machine implements preventive maintenance.
Principles: Students should explain the principle of:
- Operating agricultural machine implements.
- Servicing agricultural machine implements
Theories: Students should:
- Describe agricultural machine implements operations.
- Explain the importance of preventive maintenance on agricultural machine implements
- Outline maintenance schedule of different agricultural machine implements.
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions while operating agricultural machine implements.
- Safe handling of working tools and equipment.
- Waste disposal.
Swali
Which term describes an implement that is carried fully on the tractor's three-point linkage?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado