Mada za sehemu hiiHandling fire accidentsMada 2
- Handling firefighting equipment and materials
- Handling different types of fire
Handling Different Types of Fire

Fires in the studio can occur from different materials and sources. Knowing how to identify the type of fire and use the correct firefighting method is essential for protecting yourself, your classmates, and studio equipment. Using the wrong extinguisher on a fire can make the situation worse.
Fires are classified into types based on what is burning. Each class requires a different approach to extinguish safely.
Class A Fire
Class A fires involve ordinary combustible materials. These are common materials found in the studio:
- Wood and wood products
- Paper and cardboard
- Fabric, cloth, and textiles
- Plastics
Class B Fire
Class B fires involve flammable liquids or gases. In a graphic design studio, these may include:
- Paints and solvents
- Oils and grease
- Ink and thinners
- gasoline or diesel (if used for cleaning)
Class C Fire
Class C fires involve electrical equipment that is energized (still connected to power). These include:
- Computers and monitors
- Printers and scanners
- Electrical wiring and outlets
- Power tools and extension cords
Class D Fire
Class D fires involve combustible metals such as magnesium, aluminum, or sodium. These are less common in graphic design studios but may occur in specialized workshops.
Different fire extinguishers are designed for different fire classes. Using the correct extinguisher is critical.
Class A Extinguisher
Class A extinguishers use water or foam to cool the burning material and reduce heat. The cooling effect removes the heat energy that keeps the fire burning.
Class B Extinguisher
Class B extinguishers use foam, dry chemical, or carbon dioxide to create a barrier that cuts off the fire's access to oxygen. Without oxygen, the fire cannot continue burning.
Class C Extinguisher
Class C extinguishers use dry chemical agents that can interrupt the electrical current. This makes them safe to use on electrical fires without risking shock to the person fighting the fire.
Step 1: Identify the Fire Class
Before taking action, quickly identify what is burning. Look at the source of the fire:
- Is it wood, paper, or fabric? → Class A
- Is it a liquid or gas? → Class B
- Is it electrical equipment? → Class C
Step 2: Select the Correct Extinguisher
Match the extinguisher to the fire class:
- Class A fire → Water or foam extinguisher
- Class B fire → Foam, CO2, or dry chemical extinguisher
- Class C fire → Dry chemical extinguisher (never use water on electrical fires)
Step 3: Use the PASS Technique
When using a fire extinguisher, remember PASS:
- Pull the pin from the handle
- Aim the nozzle at the base of the fire
- Squeeze the handle slowly and evenly
- Sweep the nozzle from side to side at the base of the fire
Step 4: Maintain Safe Distance
Stand at least 2-3 meters from the fire when using an extinguisher. Move closer only as the fire begins to die down.
Step 5: Evacuate if Necessary
If the fire is too large or spreading, evacuate immediately and alert others. Close doors behind you to contain the fire.
Scenario: A student's brush catches fire while using turpentine to thin oil paint. The turpentine-soaked brush ignites.
Solution:
- Identify the fire class: This is a Class B fire because turpentine is a flammable liquid.
- Select the correct extinguisher: Use a Class B extinguisher (foam or dry chemical). Do not use water, as it will spread the burning liquid.
- Apply the PASS technique: Pull the pin, aim at the base of the flames, squeeze the handle, and sweep side to side.
- Evacuate if needed: If the fire spreads to nearby materials, leave the area and alert others.
Using the wrong firefighting method can be extremely dangerous:
- Water on electrical fires: Can cause electrical shock or spread the fire
- Water on flammable liquid fires: Can cause the fire to spread rapidly
- Using Class A extinguisher on electrical fires: Water conducts electricity and puts the person at risk
In Tanzania, graphic design studios and printing shops in places like Kariakoo or along Malawi Road in Dar es Salaam handle flammable inks and solvents daily. If a printer's electrical motor overheats and catches fire, knowing to use a Class C (dry chemical) extinguisher rather than water can prevent serious injury and save expensive equipment worth hundreds of thousands of Tanzanian shillings.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Identify common classes of fire
- React correctly and safely when faced with different types of fire
- Handle different types of fire
- Apply right class of firefighting materials
Tathmini ya matokeo
Fire accidents handled as per rules and regulations.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Identify different type of fire extinguisher
- Apply the right type of fire extinguishers
- Apply right type of firefighting materials
Principles: The student should explain the principles of:
- Identifying different type of fire extinguishers
- Checking and testing fire extinguishers
- Applying right class of fire extinguishers
Theories: The student should explain: -
- Importance of handling fire accidents
- Types and common classes of fire
- Handle different types of fire
- Importance of checking and servicing fire extinguishers
- Importance of differentiate firefighting materials
Swali
Which type of fire involves ordinary combustible materials such as wood, paper, and fabric?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado