Mada za sehemu hiiHandling accidents and incidentsMada 5
- Handling mechanical hazards
- Handling physical hazards
- Handling chemical hazards
- Handling electrical hazards
- Maintaining safety gear
Handling Electrical Hazards

Electrical hazards are potential sources of harm arising from the use or presence of electricity. In a workshop, these hazards can cause serious injuries such as electrical shocks, burns, or even death. They can also lead to fires that damage equipment and property.
The following are the main electrical hazards you may encounter:
1. Exposed Wires
Damaged or worn electrical cords have exposed wires that can cause electrical shocks when touched. This happens when cable insulation becomes cracked, frayed, or worn out through continued use.
2. Faulty Electrical Equipment
Equipment that is damaged, malfunctioning, or has defective components can unexpectedly deliver electrical current to a person who touches it. This includes devices with broken switches, damaged plugs, or internal faults.
3. Water Near Electrical Sources
Water is a good conductor of electricity. When water comes into contact with electrical equipment or live wires, it can create a path for current to flow through a person's body, causing severe shock.
4. Overloaded Circuits
Connecting too many devices to one power source or extension cord exceeds its design capacity. This generates excess heat, which can melt insulation and cause fires.
Before Working on Any Electrical Device
-
Turn off the main power switch — Always disconnect the power supply before opening or repairing any electrical equipment.
-
Inspect cables for wear and tear — Check all cords, plugs, and cables for damage before use. Look for frayed insulation, exposed wires, or broken plugs.
-
Use insulated tools — Handle electrical equipment with tools that have rubber-insulated handles to protect against shock.
-
Keep the work area dry — Ensure the workshop floor is dry. Never work on electrical equipment with wet hands or when standing on a wet surface.
-
Avoid overloading circuits — Do not plug too many devices into one outlet or extension cord.
Example: Checking a Faulty soldering Iron
Imagine your soldering iron is not heating properly. Before investigating:
- Unplug the iron from the power outlet
- Let it cool down completely
- Inspect the cord for cuts, exposed wires, or damage
- Check the plug to ensure it is not broken
- Only if the cord is in good condition, plug it in and test
If you find any damage, report it to your instructor and do not use the equipment until it is repaired.
When working with electrical equipment, wear the following protective gear:
- Rubber gloves — Insulate your hands from electrical current
- Safety boots — Protect your feet from accidental drops and provide insulation
- Safety clear glasses — Protect eyes from sparks or flying debris
- Overalls — Provide full-body protection
Following electrical safety practices prevents:
- Electrical shocks and burns
- Fires caused by faulty wiring or overloaded circuits
- Damage to expensive electronic equipment
- Injuries to yourself and others in the workshop
When assessing electrical hazards in your workshop, ask yourself:
- Are there any cords with exposed wires?
- Is any electrical equipment damaged or making unusual sounds?
- Are power outlets overloaded with too many plugs?
- Is there water or moisture near electrical equipment?
- Are devices left plugged in when not in use?
After identifying hazards, suggest preventive measures such as replacing damaged cords, using proper outlets, keeping areas dry, and turning off equipment when not in use.
In Tanzania, many households and small workshops use extension cords to power multiple devices. When several students share one power strip in a computer lab or a tailoring workshop connects multiple sewing machines to one outlet, this creates an overloaded circuit hazard. Applying the principles of identifying overloaded circuits and inspecting cables for wear and tear helps prevent electrical fires in these common settings, protecting both people and equipment worth hundreds of thousands of Tanzanian shillings.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Carry out first aid on persons involved in accidents related to electrical hazards
- Use service manual
- Interpret workshop rules and regulations
- React correctly and safely when faced with an emergency
- Identify and apply all emergency equipment and supplies
- Locate first aid kit
- Carry out artificial respiration
- Take necessary steps to save the victim
- Report to superiors
- Record accidents
- Make periodic inspections of workshop area and equipment
- Identify hazardous materials
- Use colour codes and know what colour represent
- Handle electrical equipment
- Follow good environmental practices
- Use safety gear
- Store tools and equipment
Tathmini ya matokeo
Machines and equipment accidents and incidents handled according to workshop rules and regulations
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of: Method used: The student should explain how to:
- Use safety gear
- Use colour codes and safety signs
- Handle an accident victim
- Protect an unconscious victim
- Protect a fire victim
- Carry out first aid
- React correctly and safely when faced with an emergency
Principles: The student should explain the principles of:
- Cardiopulmonary resuscitation
- Emergency life support
Theories: The student should explain:
- Emergency life support
- Treatment electric shock
- Treatment for burns
- Treatment for unconscious person
- Importance of using safety gear
- Advantages of accidents preventions
- Usage of colour codes and safety signs
- Reading manufacturer’s instructions before operating machines
Detailed knowledge about:
- Safety precautions while handling accidents and incidents
- Safe handling of tools, equipment and machines
- Waste disposal methods
- Respiratory and circulatory systems
- Basic functions of the human body
Swali
Which of the following is a major cause of electrical hazards in a workshop?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado