Mada za sehemu hiiInstalling solar cell modulesMada 5
- Installing solar panels
- Panning solar panels for optimum performance
- Connecting solar panel with batteries
- Connecting batteries to inverter circuit
- Installing control units
Panning Solar Panels for Optimum Performance
Panning (or solar tracking) is the process of adjusting a solar panel's angle and direction so it always faces the sun directly. When a solar panel faces the sun straight on, it captures the maximum amount of sunlight and produces the most electricity. Even a small misalignment can significantly reduce the energy output.
1. Orientation (Direction)
Orientation means which direction the solar panel faces. In Tanzania, the sun rises in the east and sets in the west, passing through the north (from September to March) or the south (from March to September).
- True North: For most of Tanzania, panels should face true north to receive maximum sunlight throughout the year.
- True South: In the southern hemisphere, some technicians adjust panels slightly southward during the rainy season, but true north remains the general recommendation.
A compass is used to find the correct orientation. Always correct for magnetic declination in your area.
2. Tilt Angle (Pitch)
The tilt angle is how much the panel is inclined from the horizontal. The optimal tilt angle depends on your location's latitude.
A common guideline is:
Optimal tilt=Latitude of location±15∘
- Summer (sun high): Use latitude − 15° (flatter)
- Winter (sun low): Use latitude + 15° (steeper)
For example, if you are in Dar es Salaam (latitude ≈ 7°S):
- Summer tilt: 7° − 15° = −8° (or nearly flat at 0°)
- Winter tilt: 7° + 15° = 22°
An inclinometer (or a simple protractor with a weighted string) measures the tilt angle.
3. Environmental Conditions
- Shade: Even partial shade from trees or buildings drastically reduces output
- Dust and dirt: Panels should be cleaned regularly; dirty panels can lose 10–20% efficiency
- Temperature: Solar panels work better in cooler conditions. Very hot panels actually produce less electricity
Step 1: Determine True North
Use a compass to find magnetic north, then apply the local magnetic declination correction to find true north. In most of Tanzania, declination is small (a few degrees east or west).
Step 2: Set the Orientation
Mount the panel so its face points toward true north. Secure all mounting bolts firmly.
Step 3: Set the Tilt Angle
Use an inclinometer to set the panel to the calculated optimal angle for your location and the season.
Step 4: Test the Output
Connect the panel to a multimeter set to measure DC voltage or current. Record the readings.
Step 5: Fine-tune
Make small adjustments (±5°) and record the output at each position. The angle that gives the highest voltage or current is the optimum for that time.
A student in Arusha (latitude ≈ 3°S) wants to set up a solar panel for maximum performance in June (winter season).
Step 1: Find optimal tilt using the formula:
Winter tilt=3∘+15∘=18∘
Step 2: The student uses a compass to face the panel true north.
Step 3: Using an inclinometer, the student sets the tilt to 18° above horizontal.
Step 4: The student measures output with a multimeter:
- At 15° tilt: Voltage = 17.2V
- At 18° tilt: Voltage = 18.1V (highest)
- At 21° tilt: Voltage = 17.8V
Result: The optimum tilt for June in Arusha is 18°, giving the highest voltage of 18.1V.
- Wear gloves and overalls when handling panels
- Work on a stable work bench
- Wear boots for foot protection
- Avoid touching electrical connections while the panel is exposed to light
- Disconnect the panel from any load before making adjustments
| Factor | Tool to Use | Optimal Setting for Tanzania |
|---|---|---|
| Orientation | Compass | True North |
| Tilt Angle | Inclinometer | Latitude ± 15° |
| Performance Test | Multimeter | Maximum voltage/current |
In many rural villages of Tanzania, such as in Singida or Mbeya, families use solar home systems to charge mobile phones and power small LED lights. By properly panning their solar panel to face true north and setting the correct tilt angle, a household can increase the charging time available each day. For example, a correctly angled 20-watt panel in Morogoro can fully charge a phone in 3 hours during the dry season, while a poorly aligned panel of the same size may take 5 hours or fail to charge the phone completely by sunset. This directly saves money on additional battery purchases and ensures reliable communication for market activities.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret circuit diagrams
- Select tools and equipment
- Pan solar panel
- Observe safety precautions
- Clean tools, equipment and workplace
- Store tools, equipment and components
Tathmini ya matokeo
Installed solar cell modules function as per the manufacturer’s specifications.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- pan solar panels
Principles: The student should explain the principles of:
- pan solar panels
- Maintaining solar panels
Theories: The student should explain:
- Characteristics of solar cells
- Parameters of solar panels
- Parts of solar power circuits and their functions
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions when installing solar power
- Safe handling of tools, equipment and solar panels.
Swali
What is meant by "panning" a solar panel?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado