Mada za sehemu hiiCarrying out risk assessmentMada 2
- Controlling risk
- Managing safety gear
Controlling Risks in Electronics Repair
When we have identified and assessed risks in the workshop, the next important step is to control them — that is, to take action so that the risk does not cause harm to people, equipment, or the environment. Risk control means applying specific measures to reduce or eliminate hazards before they cause injury or damage.
There is a well-established order, called the hierarchy of control, which ranks control measures from most effective to least effective. We always try the methods at the top first because they give the best protection.
1. Elimination
This is the most effective measure. We remove the hazard completely so that it no longer exists.
- Example: Disconnect the power supply before opening a faulty television to eliminate the risk of electric shock.
2. Substitution
If we cannot eliminate the hazard, we replace it with something less dangerous.
- Example: Using a battery-powered soldering iron instead of a mains-powered one reduces the risk of electric shock.
3. Engineering Controls
These are physical changes to the workplace or equipment that separate people from the hazard.
- Example: Installing insulation around high-voltage components or using fuse holders with protective covers.
4. Administrative Controls
These are changes to the way people work — rules, procedures, and training.
- Example: Creating a rule that only trained technicians handle live circuit boards, or scheduling high-risk tasks during quiet workshop hours.
5. Personal Protective Equipment (PPE)
PPE is the last line of defence. It protects the individual but does not remove the hazard.
- Examples in electronics repair:
- Safety glasses — protect eyes from flying solder splashes
- Gloves — protect hands from heat and sharp components
- Ear plugs — protect hearing when using loud equipment
- Safety boots — protect feet from falling tools or heavy components
- Overall — protect skin from chemical burns or heat
Important: PPE should only be used when higher-level controls are not possible.
When you are given a risk scenario in the workshop, follow these steps:
- Identify the hazard — What can cause harm?
- Assess the risk — How serious could it be? Who could be affected?
- Choose control measures — Start at the top of the hierarchy (elimination first).
- Implement the controls — Apply the chosen measures using available resources.
- Review and monitor — Check if the controls are working and improve if needed.
Scenario: You are asked to repair a laptop that has a cracked screen. The laptop is still plugged into the mains power supply.
Step 1 — Identify the hazard: Electric shock from live mains voltage; cuts from sharp broken glass.
Step 2 — Assess the risk: High — mains voltage can cause serious injury or death; broken glass can cut skin.
Step 3 — Choose control measures (following the hierarchy):
- Elimination: Unplug the laptop from the mains before starting work.
- Substitution: (Not applicable here — we must work on this specific laptop.)
- Engineering controls: Use insulated tools; work on a rubber mat.
- Administrative controls: Follow the "Power Off First" workshop rule; only experienced students handle screens.
- PPE: Wear safety glasses (for glass fragments) and gloves (for sharp edges).
Step 4 — Implement: Unplug the laptop, place it on the rubber mat, put on safety glasses and gloves, then proceed with the repair.
This approach ensures that the most dangerous risks are dealt with first, reducing reliance on PPE alone.
- Risk control means taking action to reduce or remove identified risks.
- Always follow the hierarchy of control: Elimination → Substitution → Engineering Controls → Administrative Controls → PPE.
- Higher-level controls are more reliable than lower-level ones.
- A good risk control plan considers the specific context of electronics repair work.
In Tanzania, many small electronics repair shops in towns like Arusha, Mwanza, or Dar es Salaam handle daily repairs of mobile phones, televisions, and radios. A technician who applies proper risk control — such as always unplugging devices before repair, using gloves when handling broken screens, and keeping the workshop floor clear of tools — can avoid accidents that could cause injury or costly medical bills. This protects both the technician's health and their ability to continue earning a living from their trade.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Interpret service manuals
- Select tools and equipment
- Supervise practice safe workshop practices to protect yourself, other and properties
- React correctly and safely when faced with an emergency
- Identify and apply correctly all emergency equipment and supplies
- Make periodic inspections of workshop area and all equipment and prepare report
- Conduct safety training
- Identify any safety hazard material
- Handle hazard material correctly
- Prepare universal workshop colour codes and know what the colour represents
- Make out and file safe report
- Be aware of the dangerous of compressed air
- Ensure availability of personal protective equipment
- Supervise compressed air rules
- Monitor good environmental practices
- Clean tools and equipment
- Store tools and equipment
Tathmini ya matokeo
Risk assessment carried out as per OSHA standard and automobile regulations
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Conduct safety training
- Identify safety hazard material
- Handle hazard material
- Prepare inspection report
Principles: The student should explain the principles of:
- Reacting correctly and safely when faced with an emergency
- Identifying and applying correctly all emergency equipment and supplies
- Conducting safety training
- Identifying safely hazards materials
- Handling hazard materials
Theories: The student should explain:
- Carry out risk assessment
- Conducting safety training
- Inspecting workshop areas, tools and equipment
- Handling Hazard material correctly
- Follow compressed air rules
Detailed knowledge about:
- Safety precautions while carrying out risk management
- Safe handling of tools and equipment
- Waste disposal
Swali
According to the hierarchy of control, which control measure is considered the MOST effective?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado