Mada za sehemu hiiPerforming preventive maintenance of electrical equipmentMada 2
- Maintaining passive equipment
- Maintaining active equipment
Maintaining Active Equipment
Active equipment refers to electrical and electronic devices that require a power source to operate, such as motors, generators, transformers, soldering irons, and measuring instruments. Regular maintenance of these devices ensures they work safely, last longer, and perform efficiently. This note covers how to inspect, clean, and maintain active equipment in the workshop.

Active equipment are devices that need electrical power to function. In an electronics repair workshop, examples include:
- Soldering irons
- Multimeters
- Oscilloscopes
- Power supplies
- Motors and fans
- Testing and measuring instruments
These devices have moving parts, heating elements, or sensitive electrical components that require regular checking.
Regular maintenance of active equipment:
- Prevents accidents – faulty equipment can cause electric shocks or fires
- Extends equipment life – well-maintained devices last longer
- Ensures accurate readings – calibrated and clean instruments give correct measurements
- Saves money – reduces need for expensive repairs or replacements
Step 1: Inspect Before Use
Before using any active equipment, always check:
- Power cord – look for cuts, cracks, or exposed wires
- Plug – ensure it is not damaged
- Body of equipment – check for cracks or physical damage
- Switches and controls – test that they work properly
Step 2: Check Power Source
- Verify the voltage rating matches the supply
- Inspect power outlets for loose connections
- Use a multimeter to confirm proper voltage
Step 3: Verify Electrical Connections
- Check all terminals are tight and secure
- Look for loose or corroded connections
- Ensure grounding wires are properly connected
Step 4: Check Moving Parts
- Inspect fans, motors, and gears for wear
- Listen for unusual sounds during operation
- Check for proper rotation and movement
Step 5: Lubricate Moving Parts
- Apply appropriate lubricant to motors, gears, and hinges
- Use only recommended lubricants for each device
- Avoid over-lubricating, which can attract dirt
Step 6: Clean the Equipment
- Remove dust and debris using a soft brush or compressed air
- Clean surfaces with a damp cloth and mild cleaner
- Ensure equipment is dry before reconnecting power
Step 7: Record Maintenance in a Log
Keep a maintenance log with:
| Date | Equipment Name | Activity Performed | Condition | Technician |
|---|---|---|---|---|
| 15/01/2025 | Soldering Iron | Cleaned tip, checked cord | Good | Amina |
- Always disconnect power before performing maintenance
- Wear safety gloves and safety clear glasses
- Use insulated tools
- Never work on wet surfaces
- Follow manufacturer's instructions in service manuals
A student inspects a soldering iron before a practical session:
- Visual inspection – the power cord is undamaged and the plug is intact
- Power check – use a multimeter to confirm the voltage is 230 V, which meets the requirement
- Tip cleaning – clean the soldering iron tip with a brass wire ball
- Record – record the inspection results in the maintenance log
This routine ensures the soldering iron works properly and safely during the practical work.
The following tools are needed:
- Tool boxes and tool racks for organized storage
- Service manuals for equipment specifications
- Multimeter for electrical testing
- Cleaning tools (brushes, cloths, spirit can)
- Lubricants for moving parts
- Safety gear (gloves, safety clear glasses, overcoat)
Store all tools properly after use to keep them in good condition.
In Tanzania, a technician at a small electronics repair shop in Arusha uses these maintenance steps every day. Before repairing a customer's television, the technician checks the soldering iron, multimeter, and power supply — cleaning the multimeter probes, tightening loose connections on the power supply, and recording each check in a notebook. This routine prevents equipment failure during repairs, saves money on replacements, and ensures customer trust in the business.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Select tools, equipment and safety gear
- Categorize equipment
- Identify equipment faults
- Rectify faulty equipment
- Observe safety precautions
- Clean tools and equipment
- Store tools and equipment
Tathmini ya matokeo
Maintained equipment conforms to manufacturer’s specifications.
Tathmini ya maarifa
Knowledge evidence: Detailed Knowledge of:
Method used: The student should explain different ways of maintaining equipment
Principles: The student should explain the principles of:
- Active equipment
Theories: The student should explain:
- Safety precautions of equipment
- Types of maintenance
- Types of equipment
- Application of every piece of equipment in the workshop Circumstantial Detailed knowledge about:
- Safety precautions to be observed while maintaining tools
- Waste disposal
Swali
What is the recommended way to store measuring instruments when they are not in use?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado