Mada za sehemu hiiInstalling control of single phase AC motorsMada 2
- Installing a capacitor start induction motor
- Installing a capacitor start-capacitor run induction motor
Capacitor Start-Capacitor Run Induction Motor
A capacitor start-capacitor run induction motor is a single-phase AC motor that uses two capacitors—one to start the motor and another to keep it running efficiently. It is commonly used in appliances that need high starting torque and continuous operation, such as air conditioners, refrigerators, and water pumps.
The motor consists of the following main parts:
-
Stator (Stator Winding) – The stationary part that produces a rotating magnetic field. It has two windings:
- Run winding (main winding) – Operates continuously during motor operation
- Start winding (auxiliary winding) – Works only during starting
-
Rotor – The rotating part (squirrel cage) that turns due to the magnetic field
-
Capacitors
- Start capacitor – Connected in series with the start winding during starting only; provides high starting torque
- Run capacitor – Stays connected during operation; improves running efficiency and power factor
-
Centrifugal switch – Disconnects the start capacitor and start winding when the rotor reaches about 75% of full speed
-
Terminal box – Houses the electrical connections for power supply and capacitors
When power is supplied:
-
Both the run winding and start winding receive current. The start capacitor creates a phase difference between the two windings, producing a rotating magnetic field.
-
This rotating magnetic field induces current in the rotor, creating torque that starts the motor turning.
-
Once the rotor reaches about 75% of its rated speed, the centrifugal switch opens, disconnecting the start capacitor and start winding.
-
The run capacitor remains connected, improving the motor's running performance by shifting the phase and increasing efficiency.
Safety First
Before starting, wear safety boots, goggles, leather gloves, and overalls. Ensure the power supply is OFF before making any connections.
Step 1: Inspect the Motor
- Check the motor nameplate for voltage, frequency, and power ratings
- Inspect all components for visible damage
- Use a multimeter to check continuity of the windings and capacitors
Step 2: Mount the Motor
- Secure the motor firmly to the work bench using bolts and spanners
- Ensure proper alignment with the load (pump, fan, or other equipment)
Step 3: Wire the Motor
-
Identify the terminal connections in the terminal box:
- Common (C) – Connected to one end of both windings
- Run (R) – Connected to the run winding
- Start (S) – Connected to the start winding
-
Connect the capacitors:
- Connect one lead of the start capacitor to the start terminal (S)
- Connect one lead of the run capacitor to the run terminal (R)
- Connect the other leads together to the common terminal (C)
-
Connect the power supply wires:
- Live (L) to the run terminal (R)
- Neutral (N) to the common terminal (C)
Step 4: Test the Motor
- Double-check all connections
- Switch on the power briefly (2–3 seconds)
- Observe the motor:
- It should start smoothly without excessive noise or vibration
- The rotation direction should match the required direction
- If the motor hums but does not start, check the capacitors and connections
Step 5: Troubleshooting
- Motor fails to start: Check power supply, start capacitor, or centrifugal switch
- Motor runs hot: Check load alignment or reduce the load
- Noise or vibration: Check mounting bolts and rotor condition
A workshop in Dar es Salaam needs to install a 1.5 HP capacitor start-capacitor run motor for a water pump. The nameplate shows: 230V, 50Hz, 10A.
Procedure:
- Verify the supply voltage matches 230V
- Check the run winding resistance ~5Ω and start winding ~10Ω using a multimeter
- Mount the motor securely on the pump base
- Connect the run capacitor (25μF) and start capacitor (80μF) as shown in the wiring diagram
- Connect live wire to terminal R, neutral to terminal C
- Test run for 5 seconds — pump operates smoothly
Capacitor start-capacitor run motors are ideal for:
- Air conditioning compressors
- Refrigerators and freezers
- Water pumps
- Washing machines
- Industrial fans and blowers
In many rural villages of Tanzania, farmers use motorised water pumps powered by capacitor start-capacitor run motors to draw water from boreholes for irrigation. For example, a small-scale tomato farmer in Morogoro can install a 1 HP pump costing around TZS 350,000 to irrigate their plot during the dry season, increasing crop yield and income. Knowing how to install and maintain these motors is a valuable skill for local technicians and farmers alike.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to explain how to:
- Interpret wiring diagram.
- Select tools, equipment and materials
- Install capacitor start-capacitor run induction motor
- Terminate cables.
- Test capacitor start-capacitor run induction motor.
- Observe safety precautions
- Clean the work place.
- Store tools, equipment and safety gear.
Tathmini ya matokeo
Capacitor startcapacitor run induction motor is installed as per standards.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: The students should explain how to Install capacitor startcapacitor run induction motor.
Principles: The students should explain the principles of operation of single-phase motor.
Theories: The students should explain:
- Types of single-phase motor
- Operation of single-phase motor
- Ratings of single-phase motor
- Necessary information obtains on name plate of the motor
- Function of capacitor start in single phase motor.
- Function of capacitor run in induction motor
- Application of single-phase motor.
Swali
What is the function of the centrifugal switch in a capacitor start-capacitor run motor?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado