Mada za sehemu hiiPerforming surface finishing operationMada 2
- Carrying out sanding
- Carrying out filing
Filing is a surface finishing process used to smoothen metal workpieces and remove burrs left after cutting operations like sawing. The tool used is called a file, which has many small cutting edges on its surface.
Filing is the process of taking burrs off a metal piece which has been cut by a hacksaw or power saw. Removing the burrs smoothens the workpiece and prepares it for further finishing. A file is a tool made of hardened steel in the form of a bar or rod with many small cutting edges raised on its longitudinal surfaces.
Files are classified in two main ways: according to the cut of the file and according to the shape of the file.
Types of Files According to Cut
The rows of teeth determine the cut of a file. There are four types:
Single Cut A single cut file has a single row of teeth in one direction on the face of the file at an angle of 60°. This type of file is used for filing soft materials such as lead, tin, and aluminium.
Double Cut A double cut file has rows of teeth in two directions across each other — one row at an angle of 50° to 60° and another at 70°. This type of file is used to file hard materials such as bronze, steel, and brass.
Rasp Cut A rasp cut file has sharp, pointed teeth in a line. It is useful for filing soft materials like wood, leather, and other non-metals. These files are available only in half-round shape.
Curved Cut Curved cut files have deeper cutting action and are useful for filing soft materials like plastic, aluminium, tin, and copper. It is available only in flat shape.
Types of Files According to Shape

Files come in various shapes for different applications:
- Flat file — used for general flat surfaces
- Triangular file — used for filing corners and grooves
- Round file — used for filing round holes
- Half round file — used for filing curved surfaces
- Square file — used for filing square openings
The main tools and equipment for filing include:
- File — the main cutting tool
- Bench vice — used to securely clamp the workpiece
- File card — a stiff wire brush used to clean the file
- Chalk or oil — applied to the file to prevent clogging
Follow these steps to properly file a metal workpiece:
Step 1: Clamp the Work Securely
It is important to secure your work with a vice to keep it from moving while filing. Mount the vice so that the stationary jaw extends slightly beyond the edge of your workbench. Place the workpiece in the vice so that it is supported by the full clamping surface. Ensure the workpiece protrudes enough to allow filing without touching the vice jaws.
Step 2: Adopt Correct Standing Position
Stand with your feet about 60 cm apart, with your left foot ahead of your right foot. You should be able to swing your arms and shoulders freely.
Step 3: File in Only One Direction
Do not use a back-and-forth motion with your file, as this will damage the file and your workpiece. Instead, only apply pressure on the forward stroke and lift the file away from the workpiece on the return stroke.
Step 4: Clean the File
There should not be any pins (small bits of filed metal) stuck in the teeth. If there are, clean them out with a file card, stiff wire brush, or a piece of skinny wire. You should clean your file every 15 strokes or so to prevent pinning.
Step 5: Apply Chalk or Oil
Rub chalk, or a small amount of lard or general-purpose oil, into the teeth of the file. This makes the file less likely to become clogged with pins, reduces metal dust, and protects the file.
Step 6: Check Measurements
Check for measurements as given in the operation sheet or working drawing.
Step 7: Clean the Workpiece and Workplace
After completing the filing operation, clean the workpiece and the workplace.
Suppose you have a flat metal bar 100 mm long that was cut with a hacksaw. The cut end has rough burrs and is not smooth. To file this workpiece:
- Clamp the metal bar securely in the bench vice with the rough end facing up
- Select a double-cut flat file for filing steel (a hard material)
- Stand with feet apart, left foot forward
- Push the file forward with even pressure, lift on the return stroke
- After every 15 strokes, clean the file with a file card
- Apply chalk to the file teeth before continuing
- Check the length frequently against your measurement
- Stop when the end is smooth and measures exactly 100 mm
- Wear safety glasses to protect eyes from flying metal particles
- Wear gloves to protect hands, but ensure they do not get caught in the file
- Secure the workpiece firmly in the vice before filing
- Do not use a damaged or worn-out file
- Clean the file regularly to prevent clogging
- Keep fingers away from the file teeth
- Work in a clean, organized area
In Tanzania, electricians and solar panel installers often use filing when installing conduits and metal trunkings. For example, after cutting a 20 mm metal conduit with a hacksaw to run wiring from a solar panel to the consumer unit, the installer must file the rough cut end to remove burrs so the conduit fits smoothly into connectors and does not damage the insulation of wires being pulled through.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to:
- Interpret the technical drawing.
- Select the material, tools and equipment for filling
- Clamp the workpiece.
- Perform filling
- Apply safety measures.
- Clean the work place and work piece.
- Store the work piece, tools and equipment.
Tathmini ya matokeo
A work piece filed as per technical specifications.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: The students should explain how to carry out filling
Principles: The students should explain principles related to filling
Theories: The students should explain:
- Advantages of filling.
- Types of files
Swali
What is the main purpose of filing in metalwork?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado