Mada za sehemu hiiInstalling lighting circuitsMada 4
- Installing lighting points controlled by one way one gang switch
- Installing lighting points controlled by one way, two gang switch
- Installing lighting points controlled by two-two way switches
- Installing lighting points controlled by two-two way switches and intermediate switch
Installing Lighting Points Controlled by Two-Way and Intermediate Switches
This study note explains how to install lighting circuits that allow a lamp to be switched on or off from two or more different locations. This is commonly used in homes with multiple entrances, staircases, and long corridors.
A lighting circuit distributes electrical power to light fixtures throughout a building. The switches control whether electricity flows to the lights, allowing users to turn lights on or off as needed. In many buildings, it is convenient to control the same light from more than one position.
Two-Way Switch
A two-way switch (also called a single-pole, double-throw switch) has three terminals:
- Common (COM): The terminal that connects to the live supply or the load
- L1: One output terminal
- L2: Another output terminal
When the switch is in one position, COM connects to L1. When in the other position, COM connects to L2.
Intermediate Switch
An intermediate switch (also called a cross-over switch) has four terminals:
- L1 IN and L1 OUT: One pair of terminals
- L2 IN and L2 OUT: Another pair of terminals
This switch crosses the connections, allowing the circuit to be controlled from three or more locations when placed between two two-way switches.
Controlling a Light from Two Locations
Use two two-way switches connected as follows:
- Connect the live supply (Line) to the Common terminal of the first two-way switch
- Connect the L1 and L2 terminals of the first two-way switch to the corresponding L1 and L2 terminals of the second two-way switch using two cables
- Connect the Common terminal of the second two-way switch to the light fixture (load)
- Connect the neutral wire directly from the distribution board to the light fixture
- Connect the earth wire for safety
Controlling a Light from Three Locations
Add one intermediate switch between the two two-way switches:
- Install the first two-way switch at location A
- Install the intermediate switch at location B
- Install the second two-way switch at location C
- Connect L1 of the first two-way switch to L1 IN of the intermediate switch
- Connect L2 of the first two-way switch to L2 IN of the intermediate switch
- Connect L1 OUT of the intermediate switch to L1 of the second two-way switch
- Connect L2 OUT of the intermediate switch to L2 of the second two-way switch
- Complete the remaining connections as for the two-location circuit
Problem: A household in Mwanza wants to install a light in their hallway that can be controlled from both the living room entrance and the bedroom entrance.
Solution:
- Use two two-way switches, one at each entrance
- Run a 3-core cable from the distribution board to the first switch position
- Connect the brown (live) wire to the COM terminal
- Run a 3-core cable between the two switch positions
- Connect the grey and black wires to L1 and L2 respectively
- At the second switch, connect the corresponding wires to L1 and L2
- Connect the COM terminal of the second switch to the light fixture using a 2-core cable
- Connect the blue (neutral) wire directly from the DB to the light
- Install the earth wire for safety
- Test the circuit using a multimeter before switching on the supply
- Plan the circuit: Decide switch locations and cable routes
- Gather tools: Combination pliers, screwdriver set, multimeter, insulation tester, safety gear
- Install switch boxes: Mount the switch boxes at the chosen positions
- Run cables: Lay the cables according to the circuit diagram
- Make connections: Connect wires to the correct terminals
- Test the circuit: Use a multimeter to check for continuity and correct connections
- Insulation test: Use an insulation tester to ensure no short circuits
- Switch on: Turn on the supply and test the switches
- Always disconnect the power supply before working on the circuit
- Wear safety goggles, boots, and gloves during installation
- Use a voltage tester to confirm power is off before touching wires
- Ensure all connections are tight and secure
- Follow the color coding: Brown (Line), Blue (Neutral), Green/Yellow (Earth)
- Test earth continuity after installation
In Tanzania, many households in cities like Dar es Salaam and Arusha have multi-room homes where controlling lights from multiple positions adds convenience. For example, a family living in a two-story house in Mikocheni can install a landing light that they can switch on from both the ground floor and first floor using two-way switches, making it safe to navigate the stairs at night without walking in darkness to find the switch.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to explain how to:
- Prepare electrical drawings.
- Select tools, equipment and materials required.
- Prepare accessories and cables for lighting circuits.
- Install lighting circuit.
- Test the installation.
- Apply safety measures.
- Clean work area.
- Store tools, equipment and remaining materials.
Tathmini ya matokeo
lighting points controlled by two-two-way switches and an intermediate switch is installed as per IET regulation
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: The students should explain how to install lighting points controlled by two two-way switches and intermediate switches.
Principles: The students should explain how to install lighting points controlled by two two-way switches and an intermediate switch.
Theories: The students should explain
- Connection of lighting points controlled by twotwo way switches and an intermediate switch.
- IET regulations
Swali
What are the three terminals found on a two-way switch?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado