Mada za sehemu hiiHandling fire accidentsMada 2
- Handling firefighting equipment and materials
- Handling different types of fire
Handling Different Types of Fire
Fire is a useful tool in our workshop, but it can also be dangerous when it occurs in the wrong place. Understanding how to identify different types of fire and use the correct extinguishing method is essential for every student working in a design and sewing workshop. Using the wrong method to fight a fire can make the situation worse and cause serious injuries.
Fires are classified according to the type of material that is burning. Knowing the class of fire helps you select the right extinguisher.
Class A Fire
Class A fires involve ordinary combustible materials such as wood, fabric, paper, rubber, and many plastics. These fires leave behind ash and embers. The best way to extinguish Class A fires is by removing the heat element — cooling the fire with water.
Identification symbol: A green triangle containing the letter "A"
Example in the workshop: A pile of cotton fabric catching fire, or wooden pattern pieces burning.
Class B Fire
Class B fires involve flammable liquids, petroleum greases, oils, solvents, lacquers, and alcohols. These fires burn on the surface of the liquid and can spread very quickly. They should be extinguished by smothering or blanketing the flames.
Identification symbol: A red square containing the letter "B"
Example in the workshop: Alcohol-based markers or solvents catching fire, or oil spills igniting.
Class C Fire
Class C fires occur in electrical equipment that is energized. When fighting these fires, the non-conductivity of the extinguishing agent is very important. Never use water or solutions containing water on Class C fires because water conducts electricity and can cause electric shock.
Identification symbol: A blue circle containing the letter "C"
Example in the workshop: An overloaded sewing machine motor catching fire, or faulty electrical wiring burning.
Important: If possible, shut off the electricity source before attempting to extinguish a Class C fire.
Class D Fire
Class D fires involve combustible metals such as magnesium, titanium, sodium, lithium, and potassium. These require special dry powder extinguishers designed specifically for metal fires.
Identification symbol: A yellow star containing the letter "D"
Class K Fire
Class K fires occur in cooking appliances involving vegetable or animal oils and fats. These are common in workshops where heat pressing operations take place.
Identification symbol: The letter "K"
Example in the workshop: Cooking oil used for fabric finishing catching fire.
Water Extinguisher (Red)
Used for: Class A fires only
Operation steps:
- Pull out the safety pin
- Grasp the hose and squeeze the handles together
- Direct the stream at the base of the fire
- Move the stream from side to side for full coverage
Duration: Approximately 1 minute
Carbon Dioxide (CO2) Extinguisher (Black)
Used for: Class B and Class C fires
Operation steps:
- Remove the safety pin
- Point the horn at the base of the fire
- Squeeze the handles together
- Sweep from side to side at moderate speed
- Continue applying after the fire is extinguished to prevent re-ignition
Caution: Do not touch the horn during discharge — it becomes extremely cold and can cause freezer burns.
Duration: Approximately 15 seconds
Dry Chemical Extinguisher (Blue)
Used for: Class A, B, and C fires (multi-purpose)
Operation steps:
- Remove the safety pin
- Grasp the nozzle and squeeze the handles
- Direct the stream at the base of the flames
- Move rapidly from side to side
Duration: Approximately 30 seconds
Wet Chemical Extinguisher
Used for: Class K fires (cooking oils and fats)
Operation steps:
- Remove the safety pin
- Grasp the nozzle and squeeze the handles
- Discharge as a fine spray to reduce splashing
- The foam blanket prevents re-ignition while cooling
Duration: Approximately 35-45 seconds
Firefighters need special equipment to protect themselves while fighting fires. This equipment is grouped into three categories:
Body Protection Equipment
- Flame-resistant suit
- Fire-resistant helmet
- Safety boots (gumboots)
- Heat-resistant gloves (rubber and leather)
- Transparent face shield
- Safety goggles
- Ear muffs or plugs
- Respirator or breathing apparatus
- Fire-resistant apron
Equipment Supporting Firefighting
- Fire alarm
- Fire extinguishers
- Fire hose
- Fire detector
Rescue Equipment
- Stretchers
- Rescue lines
- First aid kit
- Identify the fire class first — make sure the extinguisher matches the type of fire
- Stay low — avoid heat and smoke by staying near the floor
- Have an escape route — never let yourself get trapped in a corner
- Never fight fire alone — get help if possible
- Leave if the fire grows too large — your safety comes first
Fire extinguishers require regular checking to ensure they work when needed:
- Monthly visual inspection: Check that the extinguisher is in its designated place, the gauge is in the proper range, and the seal is not broken
- Annual maintenance: Professional inspection and testing
- Keep extinguishers visible — never block access to fire equipment
In Tanzania, tailoring shops and garment-making workshops often use pressing irons and electrical sewing machines that can cause fires if misused. If a student notices a fire starting from an overloaded socket in their workshop, they must first identify what is burning — if electrical equipment is involved, they should use a dry chemical or CO2 extinguisher (Class C), never water. Knowing this could prevent a small accident from becoming a destructive fire that damages the workshop and harms people.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Identify common classes of fire
- React correctly and safely when faced with different types of fire
- Handle different types of fire
- Apply the correct class of firefighting materials.
Tathmini ya matokeo
Fire accidents handled as per rules and regulations.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should describe on how to: Identify different type of fire extinguisher
Principles: The student should describe the correct class of fire extinguishers.
Theories: The student should outline: Importance of handling fire accidents. Circumstantial Detailed knowledge about:
- Safety
- Environment issues.
Swali
Which class of fire involves ordinary combustible materials such as wood, fabric, paper, and rubber?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado