Mada za sehemu hiiCarrying out risk assessmentMada 3
- Managing workshop safety rules
- Controlling risk
- Managing safety gears
Risk control means taking action to reduce or eliminate hazards in the workplace so that people are not hurt or equipment is not damaged. After a risk has been identified and assessed, the next step is to choose the right control measure to keep the work environment safe.
- Prevents injuries and illnesses
- Protects equipment and materials from damage
- Reduces costs from accidents and downtime
- Creates a safer working environment for everyone
Control measures are arranged from the most effective to the least effective. This order is called the hierarchy of control. Always try the higher-level controls first before moving to lower-level ones.
| Level | Control Type | What It Means |
|---|---|---|
| 1 | Elimination | Remove the hazard completely |
| 2 | Substitution | Replace with something safer |
| 3 | Engineering Controls | Isolate people from the hazard |
| 4 | Administrative Controls | Change work procedures |
| 5 | PPE | Wear protective equipment |
1. Elimination
This is the best option because it removes the danger entirely. If a hazard does not exist, it cannot hurt anyone.
Example: Instead of using hazardous chemicals to remove stains from fabric, eliminate the chemical by using plain soap and water or a safe stain remover.
2. Substitution
If you cannot remove the hazard, try replacing it with something less dangerous.
Example: Use a water-based adhesive instead of a solvent-based glue when attaching fabric pieces. Water-based products give off fewer harmful fumes.
3. Engineering Controls
Change the physical workplace or equipment to keep hazards away from people.
Example: Install a fume extraction fan above the ironing station to pull away steam and fumes. Place a fire-resistant mat under the pressing iron to prevent burns if the iron falls.
4. Administrative Controls
Change how people work by introducing rules, training, and procedures.
Example: Create a rule that students must not run inside the sewing room. Schedule regular breaks during long machine operation to prevent fatigue. Display clear safety signs near electrical machines.
5. Personal Protective Equipment (PPE)
PPE is the last line of defence. It protects individual workers from hazards that cannot be controlled by other means.
Common PPE in sewing and cloth technology:
- Apron — protects clothing from cuts, stains, and heat
- Thimble — protects fingers when hand-sewing
- Safety goggles — protect eyes when cutting or using chemicals
- Dust mask — protects lungs when working with fibre dust
- Closed shoes — protect feet from dropped needles, pins, or heavy equipment
Important: PPE must be worn correctly and kept in good condition to be effective.
When planning a sewing project, follow these steps to control risks:
- Identify the task — What will you do? (cutting, stitching, pressing, dyeing?)
- List the hazards — What can go wrong? (needle pricks, burns, chemical exposure, fire)
- Choose a control — Start at the top of the hierarchy. Ask: Can I eliminate this? If not, can I substitute it? If not, can I use engineering controls? Keep going down the list.
- Apply the control — Put the chosen measure in place.
- Review — Check if the control is working. If a new risk appears, repeat the process.
Scenario: A Form 4 student is dyeing fabric using a chemical dye. The dye has a strong smell and can irritate the skin if touched.
Apply the hierarchy of risk control:
- Elimination: Can we remove the chemical dye? No — it is needed for the project.
- Substitution: Can we use a safer dye? Yes — use natural dyes made from plant materials like mango leaves or tea leaves.
- Engineering controls: If substitution is not possible, install a window fan to pull fumes out of the room.
- Administrative controls: Post a sign reminding students to wash hands after handling dye. Provide training on safe handling.
- PPE: Students wear rubber gloves and a dust mask when mixing and applying the dye.
- Always try to eliminate a hazard first before using other controls.
- PPE is the last resort — it does not remove the hazard.
- Controls must be checked regularly to make sure they still work.
- Everyone in the workplace shares responsibility for safety.
- Proper training helps workers choose and apply the right controls.
A tailor in Kariakoo Market, Dar es Salaam, uses risk control every day when running a small sewing business. Before starting work, he checks that electrical wires are not frayed (elimination of electrical hazards), keeps a fire extinguisher near the pressing iron (engineering control), and trains his apprentices to handle sharp scissors safely and always wear an apron (administrative controls and PPE). These simple actions prevent accidents and protect his livelihood, keeping his business running smoothly and his customers trusting his work.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Interpret service manuals
- Select tools and equipment
- Supervise practice safe workshop practices to protect yourself, other and properties
- Identify and correctly apply all emergency equipment
Tathmini ya matokeo
Controlling risk conform to OSHA rules and regulations.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Conduct safety training.
Principles: The student should explain the principals involved in:
- React correctly and safely when faced an emergency.
Theories: The student should explain:
- How to carryout risk assessment
Circumstantial knowledge:
Detailed knowledge about:
Swali
Which of the following is the most effective level in the hierarchy of risk control?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado