1. Taking Accurate Measurements
Measure the cushion or pillow that will be inserted into the cover. Add seam allowance (usually 1.5 cm) to each measurement. For example, if the cushion measures 40 cm × 40 cm, the fabric cut should be:
- Length: 40 cm + (2 × 1.5 cm) = 43 cm
- Width: 40 cm + (2 × 1.5 cm) = 43 cm
2. Drafting the Pattern
Using the measurements, create a paper pattern. A standard cushion cover requires two pieces:
- Front piece — the decorative side
- Back piece — with an opening for inserting the cushion
Mark the pattern clearly with grainline arrows and notches to ensure all pieces are cut in the same direction.
3. Cutting the Fabric
Lay the fabric on a flat surface, following the grainline. Pin the pattern pieces to the fabric, then cut carefully using sharp scissors. Cut the same pieces for each cushion cover to ensure uniformity.
4. Sewing the Seams
Join the front and back pieces together:
- Place the two fabric pieces right sides together (the attractive sides facing each other).
- Pin along the edges to hold them in place.
- Sew around three sides, leaving one side open for the cushion insertion.
- Use a seam allowance of 1.5 cm and backstitch at the beginning and end to secure the stitches.
5. Adding a Closure
For a removable cover, add a zipper or button closure on the open side:
- Zipper method: Install the zipper along the opening before sewing the side seams.
- Button method: Sew buttonholes on one side and attach buttons on the opposite side.
6. Finishing the Edges
To prevent fraying, finish the seam edges with a zigzag stitch or serger. Turn the cover right side out and press with an iron to create crisp, neat edges.
7. Final Pressing and Inspection
Turn the cushion cover right side out and press all seams flat. Check that all covers are identical in size and stitching quality.