Mada za sehemu hiiMaking stitchesMada 4
- Making temporary stitches
- Making joining stitches
- Making neatening stitches
- Making decorative stitches
A stitch is a single movement of a needle and thread into and out of fabric, producing a loop or piece of thread secured in the cloth.
When making temporary stitches, you will need the following tools:
- Tape measure – for taking measurements
- Cutting shears and small scissors – for cutting fabric and threads
- Hand needle – for sewing the stitches
- Tailors' tacking pins – for holding fabric in place before stitching
- Thimble – to protect your finger and push the needle through fabric
- Clippers – for snipping threads
Stitches are divided into two main groups:
- Temporary stitches – Used to hold fabric in position temporarily. They are removed after permanent stitching is done.
- Permanent stitches – These include joining stitches, neatening stitches, and decorative stitches that remain in the garment.
Temporary stitches hold fabric layers together until permanent stitching is completed. They are also called tacking or basting stitches. A soft, cheap, white cotton thread is normally used because it is less strong than sewing cotton and breaks easily if caught in the sewing machine.
Importance of temporary stitches:
- Hold seams and hems in position before final stitching
- Prevent fabric layers from slipping out of place
- Mark pattern details like darts, pleats, and buttonholes
- Allow for fitting adjustments before permanent stitching
1. Even Tacking and Long-and-Short Tacking
Purpose: Hold seams and hems in position for stitching.
Working steps for Even Tacking:
- Bring needle up through the fabric
- Push needle down at an equal distance
- Repeat, keeping stitches even in length
- On hems, stitch near enough to hold both turnings
- On seams, stitch in a position where permanent stitching will follow
Working steps for Long-and-Short Tacking:
- Work the first stitch at medium length
- Make the next stitch longer
- Make the third stitch shorter
- Continue alternating long and short stitches
- This method is quicker and holds heavier fabrics more firmly
Removing tacking: Cut threads at intervals and lift with a seam ripper or stiletto. Remove before pressing.
2. Diagonal Tacking
Purpose: Hold together two or more layers of fabric to prevent slipping. Useful for collars, waistbands, pleats, and linings.
Working steps:
- Join the stitch by bringing needle up through all layers
- Fasten off at the starting point
- Work diagonally across the fabric at regular intervals
- Continue until all layers are secured
- Cut the threads at intervals to remove
3. Thread Marking (Tailor Tacking)
Purpose: Mark fitting lines, pleat lines, darts, and other pattern details on fabric.
Working steps:
- Use double thread on double fabric
- Work a sequence of loops through both pattern pieces
- Gently pull the two layers apart
- Cut the threads between the layers
- Lines in identical positions are now clearly marked on both pieces
Tip: Use different coloured threads for different pattern markings to avoid confusion.
4. Slip Basting
Purpose: Hold two pieces of fabric together while matching patterns exactly, such as stripes or chevrons.
Working steps:
- Place right sides of fabric together
- Work from the right side of the fabric
- Take up a small piece of the under fabric
- Come out inside the fold of the upper fabric
- Repeat along the seam line
Important: Use a matching thread because the tacking may be difficult to remove.
| Type | Use |
|---|---|
| Even tacking | Holding seams and hems for stitching |
| Long-and-short tacking | Quick holding for heavier materials |
| Diagonal tacking | Preventing layers from slipping (collars, pleats) |
| Thread marking | Transferring pattern markings |
| Slip basting | Matching patterns exactly |
In Tanzania, temporary stitches are used by tailors and seamstresses when altering school uniforms or sewing traditional garments like kanga and vitenge. For example, when adjusting a secondary school student's uniform for a better fit, the tailor first uses diagonal tacking to hold the waistband layers in place before permanent stitching, ensuring the garment sits properly without slipping. This skill is also valuable for home sewing projects and small tailoring businesses in local markets.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Interpret working drawing
- fabric alignment
- selection of suitable thread and needle.
- Stitch Accuracy
- Tension Control.
Tathmini ya matokeo
Temporary stitches conforms to stitch accuracy specifications.
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should explain ways of making temporary stitches
Principles: The student should explain the principle involved in making temporary stitches
Theories: The student should explain: Uses of temporary stitches Circumstantial Detailed knowledge about:
- Safety aspect
- Environmental issues
Swali
What is the main purpose of temporary stitches in sewing?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado