Mada za sehemu hiiHandling accidents and incidentsMada 5
- Handling mechanical hazards
- Handling physical hazards
- Handling chemical hazards
- Handling electrical hazards
- Maintaining safety gear
Electrical hazards are dangers caused by electric shock when a person comes into direct contact with an electrical conductor, such as bare wires while an appliance is live. These hazards can cause serious injuries or even death, and can also damage equipment and property in the workshop.
An electrical hazard occurs when a person receives an electric shock by touching an electrical conductor that is live or energized. The shock can cause the person to react suddenly, which may lead to secondary injuries such as falls from ladders or workstations. Electrical hazards can also cause fires and damage to machinery and equipment.
The following are common sources of electrical hazards in a Leather Goods and Footwear workshop:
- Using poorly maintained electrical equipment – Faulty or damaged electrical tools and machines can leak current and cause shocks
- Working on or near domestic electricity supplies – Incorrect handling of electrical connections
- Workplace being near overhead power lines – Dangerous if materials or equipment touch power lines
- Use of unsuitable electrical equipment in explosive atmospheres – Using equipment not designed for certain areas can create sparks
- Working without appropriate safety working gear – Not using insulated gloves or protective equipment
- Working with electricity in damp/wet conditions – Water conducts electricity and increases the risk of shock
- Exposed wires – Damaged or bare electrical cords
- Overloaded circuits – Too many devices plugged into one power source
Electrical hazards can cause the following consequences in the workplace:
- Electrical burns and fire – Electric shocks can cause severe burns and ignite flammable materials
- Injuries or death – Electric shock can stop the heart or breathing, leading to fatal outcomes
- Damage to machinery and property – Short circuits can destroy equipment and cause fires
When someone receives an electric shock, follow these steps immediately:
-
Turn off the source of electricity – If possible, switch off the power supply. If not, remove the victim from the source using a non-conductive material (dry wood, rubber, or cloth)
-
Check for signs of circulation – Look for breathing, coughing, or movement. If absent, begin artificial respiration (mouth-to-mouth)
-
Prevent chilling – Keep the victim warm by covering them with a blanket or clothing
-
Apply a bandage – Cover any burns with a clean, sterile dressing
-
Seek medical help – Take the victim to a hospital or medical center immediately
To minimize electrical hazards in the workshop:
- Regularly inspect all electrical equipment and cords for damage
- Use Ground Fault Circuit Interrupters (GFCIs) in wet areas
- Avoid overloading electrical circuits
- Keep electrical equipment away from water and damp conditions
- Use insulated tools when working with electricity
- Wear rubber gloves and safety boots when handling electrical equipment
- Never attempt repairs without proper training and authorization
In Tanzania, leather workers in small workshops in areas like Morogoro or Arusha often use electrical sewing machines and other powered equipment. Understanding electrical hazards helps these workers protect themselves from shocks while using machines like the electrical skiving machine. For example, if a worker notices a damaged power cord on their sewing machine, they should report it immediately and avoid using the machine until it is repaired, preventing potential injury.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Provide first aid to a person involved in accidents related to electrical, in accordance with the workshop rules and regulations
- React correctly and safely when faced with an emergency using appropriate equipment and supplies
- Locate first aid kit correctly
- Conduct artificial respiration
- Take the necessary steps to save the victim
- Report to superiors
- Record accidents
- Perform periodic inspections of the workshop area and equipment, with particular focus on electrical cables
- Identify materials with electrical hazards
- Use colour codes and interpret what the colours represent
- Handle electrical hazards safely and with caution
- Adhere to good environmental practices
- Use safety gear
- Clean tools, equipment and the workplace
- Observe safety precautions
- Store tools and equipment
Tathmini ya matokeo
Electrical hazards in the workshop and working environment are handled effectively.
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should explain how to:
- Identify hazard materials correctly
- Handle hazardous materials safely and with care
- Use safety gear correctly
- Use colour codes and safety signs
- Handle an accident victim with care
- Protect an unconscious victim with care
- Protect a fire victim with care
- Provide first aid with care
Principles: The student should explain the principles involved in:
- Classification of hazards
- Handling hazardous materials
- Identifying hazardous materials
- Cardiopulmonary resuscitation
- Emergency life support
Theories: The student should explain:
- The effects of electrical hazards
- Emergency life support
- Treatment for electric shock
- Treatment for an unconscious person
- Importance of using safety gear
- Advantages of preventing accidents
- Usage of colour codes and safety signs
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions while handling accidents
- Safe handling of tools, equipment and machines
- Respiratory and circulatory system
Swali
Which of the following is a common source of electrical hazards in a Leather Goods and Footwear workshop?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado