Mada za sehemu hiiHandling fire accidentsMada 2
- Handling firefighting equipment and materials
- Handling different types of fire
Fire can behave very differently depending on what is burning. Using the wrong method to put out a fire can make it worse or cause injury. Learning to recognise the type of fire and match it to the right extinguisher is a basic workshop safety skill.
Fires are grouped into classes based on the material that is burning. Each class needs a different way to be extinguished.
| Class | Type of Fire | Common Materials |
|---|---|---|
| A | Ordinary combustibles | Wood, paper, cloth, leather, rubber, plastics |
| B | Flammable liquids | Petrol, oil, grease, solvents, adhesives |
| C | Flammable gases | Cooking gas (LPG), butane, acetylene |
| D | Combustible metals | Magnesium, sodium, aluminium powder |
| Electrical | Fires in live electrical equipment (sometimes called Class E) | Wiring, switches, motors of sewing and skiving machines |
| F | Cooking oils and fats | Cooking oil, ghee |
In the leather goods workshop, Class A fires are the most common because leather, fabric, paper patterns, and wood scraps can all catch fire. Class B fires from adhesives and solvents, and electrical fires from machines and wiring, are the next most likely.
A fire needs three things to keep burning: fuel (something to burn), heat and oxygen (from the air). This is called the fire triangle. Every extinguisher works by taking away at least one of them: water cools the fire (removes heat), while foam, carbon dioxide, powder and a fire blanket smother it (keep oxygen away). This is why the extinguisher must match the class of fire.
Each class of fire requires a specific extinguisher. Most extinguishers have a red body, and a coloured band or label shows what is inside:
- Water extinguisher (red label) — safe for Class A fires only. Never use on electrical, flammable liquid or cooking oil fires.
- Foam extinguisher (cream label) — good for Class A and Class B fires. Do not use on live electrical equipment.
- Carbon dioxide (CO₂) extinguisher (black label) — safe for Class B fires and electrical fires. Hold it by the handle, never by the horn, which becomes freezing cold.
- Dry powder extinguisher (blue label) — can be used on Class A, B and C fires and on electrical fires. It makes a thick cloud, so use it with care in a small room.
- Wet chemical extinguisher (yellow label) — for Class F fires (cooking oils and fats).
- Fire blanket or bucket of dry sand — smothers a small fire, such as a small pool of burning adhesive.
Burning metals (Class D) need a special powder; never use water on them.
Always check the label on the extinguisher before use to confirm it matches the fire type.
When you discover a fire, follow these steps:
- Stay calm and raise the alarm. Shout "Fire!" so that everyone nearby knows, and tell the teacher or supervisor at once.
- Decide whether it is safe to fight the fire. Only try if the fire is small (no bigger than a waste bin), you have been shown how to use the extinguisher, and you have a clear way out behind you. If you are in any doubt, get out.
- Switch off the electricity at the main switch if machines or wiring are involved and you can reach the switch safely.
- Identify the class of fire and choose the correct extinguisher for that class.
- Use the PASS technique, standing a few metres back from the fire with your back to the exit:
- Pull the safety pin
- Aim the nozzle at the base of the flames
- Squeeze the handle to release the extinguishing agent
- Sweep the nozzle from side to side at the base of the fire
- Evacuate if the fire is too large, keeps growing, or the extinguisher is empty. Leave the building immediately, close the door behind you if you can, go to the assembly point and call the fire brigade (dial 114 in Tanzania). Do not go back inside for any reason.
Important Safety Rules
- When you practise with extinguishers, wear your overall or apron, gloves, safety boots and clear safety glasses. In a real fire, do not waste time fetching protective gear.
- Never turn your back on a fire.
- Do not use water on electrical fires, because water carries electricity and can give you a shock, or on flammable liquid fires (Class B), because the burning liquid floats on the water and spreads.
- Keep a clear exit path behind you at all times.
- Know where the first aid kit is located in case of burns.
Small burns are the most likely injury in a fire. Treat them at once:
- If clothing is burning, the person must stop, drop to the ground and roll, or be wrapped in a fire blanket.
- Cool the burn under cool running water for at least 20 minutes. Do not use ice, butter, oil or toothpaste.
- Take off rings or a watch near the burn before the area swells, but do not pull away clothing that is stuck to the skin.
- Cover the burn loosely with a sterile, non-fluffy dressing from the first aid kit. Do not burst blisters.
- Take the person to a health centre if the burn is larger than the palm of their hand, is on the face or hands, looks deep, or if they have breathed in smoke.
An extinguisher that fails when it is needed puts lives in danger, so every extinguisher must be checked regularly:
- It is in its marked place, easy to see and reach, with nothing stacked in front of it.
- The needle of the pressure gauge is in the green zone. (A CO₂ extinguisher has no gauge; it is checked by weight.)
- The safety pin and its seal are in place.
- The body has no rust, dents or leaks, and the hose and nozzle are not cracked or blocked.
- The label can be read and the service tag is in date.
Report any fault. Extinguishers are not tested by letting them off: a trained technician services them, usually once a year, and refills any extinguisher that has been used, even for a moment.
After a practice session, or after a small fire has been put out:
- Do not go back into the area until the supervisor says it is safe. Open doors and windows to clear smoke and powder.
- Wearing gloves, safety boots and glasses, wait until everything is cold, then sweep up powder, foam and burnt material and put it in a metal bin with a lid. Put solvent-soaked rags in a closed metal container, not with ordinary rubbish.
- Report every used extinguisher for refilling. Never hang a used extinguisher back in its place as if it were full.
- Clean the tools and store them according to their type. Lay out the fire equipment where it belongs: extinguishers on their brackets near the exits, the fire blanket and sand bucket in their marked places, and the first aid kit restocked and back in its place.
A student accidentally knocks over a container of adhesive solvent near a workbench lamp, and the solvent catches fire. This is a Class B fire (flammable liquid). The student should:
- Shout to warn others and call the supervisor immediately.
- Not use a water extinguisher — water will spread the burning liquid.
- If the fire is small and the way out is clear, use a foam, dry powder or CO₂ extinguisher, or cover the flames with a fire blanket to smother the fire.
- If the fire is large or keeps growing, evacuate and call the fire brigade.
In a small leather workshop in Arusha, a craftsman uses adhesive solvents daily to join leather pieces. If a solvent fire starts, knowing to use a foam extinguisher rather than water can prevent the fire from spreading to the workshop's stock of leather, and more importantly, protect people from burn injuries.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select correct tools and equipment, and safety gear.
- Identify common classes of fire
- Use first aid kit
- React correctly and safely when faced with different types of fire
- Apply the right class of fire extinguisher
- Handle different types of fire with care
- Clean up tools, equipment and the workplace thoroughly
- Store tools according to their types
- Lay out equipment accordingly
Tathmini ya matokeo
The students are able to handle different types of fire with care
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Identify different types of fire extinguishers
- Apply the right type of fire extinguishers
Principles: The student should explain the principles involved in:
- Identifying different types of fire extinguishers
- Applying the right class of fire extinguishers
- Check and test fire extinguishers
Theories: The student should explain:
- The importance of handling fire accidents
- Types and common classes of fire
- Handle different types of fire
- The importance of checking and servicing fire extinguishers
Circumstantial knowledge:
Detailed knowledge of:
- Safety precautions while handling fire accidents
- Safe handling of tools and equipment
- Waste disposal methods
Swali
Which class of fire involves burning leather, wood, and fabric?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado