Mada za sehemu hiiDrying and dressingMada 2
- Performing hand tanned leather
- Performing trimming of tanned leather
Hand tanned leather is leather that has been processed using traditional methods without the use of modern industrial chemicals. The hand tanning process uses natural tannins found in plant materials to preserve the hide and make it durable for making leather goods such as bags, belts, shoes, and wallets. This method is commonly used in rural areas of Tanzania where access to industrial tanning facilities is limited.
The main purposes of hand tanning are:
- To preserve the raw hide and prevent it from decaying
- To make the leather soft and flexible for working
- To give the leather strength and durability
- To prepare the leather for further processing into finished products
1. Preparation of Raw Hide
Before tanning, the raw hide must be properly prepared. This involves removing any flesh, fat, and dirt from the hide using a blunt knife or scraper. The hide is then soaked in clean water for several hours to rehydrate it.
2. Liming
The soaked hide is placed in a lime solution (made from calcium hydroxide) for 2-3 days. This step helps to:
- Remove the hair from the hide
- Swell the leather fibers to allow better absorption of tannins
- Clean the hide thoroughly
After liming, the hide is washed thoroughly with clean water to remove all lime residue.
3. Deliming
The limed hide is treated with acidic solutions (such as ammonium salts) to reduce the alkalinity. This process stops the liming action and makes the hide ready to accept tannins. The hide is tested by checking that it floats in water without sinking.
4. Pickling
The hide is placed in a pickle solution containing salt and acid (usually sulfuric acid or formic acid). Pickling:
- Lowers the pH of the hide
- Prevents bacterial growth
- Helps the hide absorb tannins evenly
The hide remains in the pickle solution for 1-2 days.
5. Tanning
This is the most important step. The pickled hide is placed in a tanning solution made from natural tannins. Common sources of natural tannins in Tanzania include:
- Bark from acacia or mpingo trees
- Leaves from certain shrubs
- Fruits fromimba (myrobalan)
The hide is submerged in the tanning solution for 5-14 days, depending on the thickness of the hide. The solution is stirred daily to ensure even tanning.
6. Washing and Wringing
After tanning, the hide is removed and washed with clean water to remove excess tannins. The hide is then wrung or pressed to remove excess water.
7. Stretching and Drying
The tanned hide is stretched on a drying board or frame using nails or clips. It is dried slowly in a shaded area away from direct sunlight, which can cause the leather to become hard and brittle. During drying, the hide is periodically stretched again to prevent shrinkage.
8. Dressing
Once dry, the leather is dressed by applying oils or fats to make it soft and flexible. The leather may also be polished or finished as needed.
- Workbench: A sturdy table for working on the hide
- Drying boards: Flat surfaces for stretching and drying the leather
- Roofing nails: For securing the hide during stretching
- Hammers: For driving nails and working the leather
- Wooden beams: For supporting the hide during processing
- Hard brooms: For cleaning the hide
- Plastic containers and buckets: For holding solutions
- Water horse: A support for holding the hide while working
- Leather horses: Specialized stands for holding leather during processing
When performing hand tanning, always wear:
- Safety boots to protect feet from wet and slippery surfaces
- Safety gloves to protect hands from chemicals and sharp tools
- Overall or dust coats to protect clothing
- Mask to avoid inhaling dust and chemical fumes
Work in a well-ventilated area and wash hands thoroughly after handling chemicals.
A student is given a small goat hide to tan using hand tanning methods. The student follows these steps:
- Soaks the hide in water for 3 hours
- Places it in lime solution for 2 days, then washes thoroughly
- Delimes by soaking in ammonium chloride solution for 4 hours
- Pickles in salt and acid solution for 1 day
- Tans in a tannin solution made from acacia bark for 7 days, stirring twice daily
- Washes, wrings, and stretches the hide on a drying board
- Allows it to dry slowly for 3 days, re-stretching twice
- Applies coconut oil to dress the dry leather
The result is a soft, durable piece of hand tanned leather ready for making leather goods.
In Tanzania, small-scale leather artisans in areas like Arusha, Moshi, and Dodoma use hand tanning methods to process hides from local slaughterhouses. A youth who learns hand tanning can start a small business producing leather for making belts, sandals, and bags to sell at local markets or to tourists, earning an income while preserving traditional craftsmanship.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Identify materials
- Identify tools and equipment
- Spread leather on the drying board
- Stretch and nail leather
- Dry the leather
- Observe safety
- Clean materials
- Clean tools and equipment
- Store materials
- Store tools and equipment
Tathmini ya matokeo
Dried and dressed crust conform to leather technology set specifications and procedures.
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should explain how to:
- Identify materials
- Stretch leather for drying
- Determine drying time
Principles: The student should explain the principles related to:
- Stretching leather
- Air drying leather
- Nailing leather
- Leather dressing
Theories: The student should explain:
- Drying time
- Importance of handling leather
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions while performing drying of leather
Swali
What is the main purpose of hand tanning leather?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado