Mada za sehemu hiiMaking special advanced leather goodsMada 6
- Making trunks
- Making solid bags
- Making purses and wallets
- Making computer bags
- Making pilot bags
- Making diplomatic bags
Purses and wallets are everyday accessories used to carry money, cards, and small personal items. Making them is an important skill in leather craft because they combine practical function with neat finishing. This topic teaches you how to plan, cut, assemble, and finish a quality purse or wallet from leather.
Before starting a project, you must decide what type to make. Common types include:
- Billfold wallet – folds open with compartments for notes and cards
- Coin purse – has a zip or button closure for small items and coins
- Cardholder wallet – slim design with slots for cards only
- Clutch purse – hand-held bag without handles, often used for special occasions
Choosing the right type depends on the purpose and the customer's needs.
You will need the following main materials:
- Quality leather or synthetic leather (for the outer body)
- Fabric lining (cotton or polyester)
- Reinforcement (thin board or stiffening fabric) for parts that must keep their shape
- Thread (nylon or waxed thread for hand stitching)
- Adhesive (rubber cement or contact cement)
- Fastenings (zips, buttons, snaps, or Velcro)
Tools needed include:
- Cutting patterns and marking tools (steel ruler, divider, cutting knife)
- Skiving machine for thinning leather edges
- Sewing machine with appropriate needles
- Hammer and mallet for setting fasteners
- Gluing brushes and container
- Workbench with proper support
Before cutting any material, keep these principles in mind:
- Accurate measuring – all measurements must be exact to ensure parts fit together properly; on a small article an error of even 1–2 mm shows clearly, so precision and attention to detail matter at every step
- Proper skiving – edges of leather must be thinned where pieces overlap to avoid bulkiness
- Even stitching – stitches should be uniform in size and tension for a professional look
- Secure fastenings – buttons, snaps, and zips must be firmly attached to withstand daily use
- Clean finishing – edges should be burnished or sealed so they do not fray
Step 1: Design and Planning
Study the design, or the customer's request, and be clear about the purpose of the purse or wallet. Decide on:
- The number of compartments needed
- The type of closure to use
- The size based on standard currency or card dimensions
Step 2: Taking Measurements
Measure the items the purse or wallet will carry:
- Measure the largest banknote the wallet must hold, laid flat
- Standard ATM cards measure 8.5 cm × 5.4 cm
- Allow a few millimetres of ease so that notes and cards slide in and out easily, then add the stitching allowance (about 5 mm) on every edge that will be stitched
Step 3: Preparing the Patterns
- Transfer measurements onto pattern paper
- Draw the outer shape and each internal compartment
- Label each piece clearly (front, back, flap, lining, gusset, reinforcement)
- Cut a model of the design by hand from thin card (carton) and fold it to check the size and how the parts fit before any leather is cut
- Lay the patterns close together to estimate how much leather the design needs, and add a little extra for flaws and waste
- Choose the accessories and fittings the design calls for (zip, press stud, lining, thread) before you start cutting
Step 4: Cutting the Materials
- Check the leather for scars, holes and loose areas, place the pattern on a good part and mark all edges using a divider or scriber
- Cut along marked lines using a sharp cutting knife on a cutting mat
- Lay the patterns on the lining fabric and on the reinforcement material, trace them and cut them out; cut reinforcements slightly smaller than the leather parts so that they stay inside the seams
- For zipped compartments, cut the zip opening before assembling
Step 5: Skiving the Edges
Use the skiving machine to thin:
- The edges that will be folded over
- The corners that will be joined together
- The turnover and binding allowances, and the small holders for rings or other accessories
- This prevents bulky seams and gives a smooth finish
Step 6: Gluing and Assembling
- Glue the reinforcements to the flesh side of the parts that need stiffening
- Prepare the smaller parts first: the flap, the gussets, the inside pockets and any wrist strap
- Bevel the cut edges and mark the stitching line with a divider, a few millimetres in from the edge
- Apply contact cement to both surfaces being joined, working near an open window and away from any flame
- Allow the adhesive to become touch-dry (usually 5–10 minutes)
- Press the surfaces firmly together
- Use a hammer or mallet to tap the seam flat
Step 7: Stitching
For hand stitching:
- Punch stitch holes along the seam using an awl (holes should be evenly spaced, about 3–4 mm apart)
- Thread a needle and sew using a saddle stitch (two needles, one from each end)
- Use waxed thread, pull every stitch with the same tension, and finish by stitching back over the last two or three holes
For machine stitching:
- Set the machine to a medium stitch length
- Test the stitch on an offcut of the same leather first, using a leather needle and thread that suit its thickness
- Stitch along the marked line, keeping a consistent margin of about 3 mm from the edge
- Sew slowly and get it right the first time: every needle hole stays in leather, so a seam cannot be unpicked without leaving marks
- Cut the thread ends close and secure them so that the seam does not come undone
Step 8: Installing Fastenings
- Fit snaps and zips to the separate parts before the body is glued and stitched closed, because you cannot reach inside afterwards
- Mark the exact position for buttons, snaps, or zips
- Use a hammer to set snaps firmly into place
- Attach zips using a zip foot on the sewing machine or by hand with a saddle stitch or backstitch
Step 9: Finishing the Edges
- Apply edge finish (wax, paint, or edge coat) to all exposed leather edges
- Burnish the edges using a wooden slicker or canvas scrap
- This seals the edges and gives a polished appearance
- Clean off any glue marks, then polish the leather or spray it lightly with leather finish and let it dry
- Wrap or box the finished purse or wallet so that it stays clean and keeps its shape
- Wear an overall or dust coat and closed shoes; tie back long hair and keep sleeves and loose clothing away from the sewing and skiving machines
- Cut with a sharp knife on a cutting board, with the blade moving away from the hand that holds the ruler; a blunt knife slips and causes more injuries than a sharp one
- Keep fingers clear of the needle and of the skiving machine's knife and feed roller, and switch a machine off before threading it, changing a needle or cleaning it
- Use adhesives, dyes and sprays with the windows open, keep the tins closed when not in use and keep them away from flames and sparks, because the solvents catch fire easily and their fumes are harmful
- Put leather and fabric offcuts in a waste bin, keeping larger pieces for small items such as key holders; never burn leather waste or pour leftover adhesive or dye into a drain or onto the ground
- When the work is finished, sweep the workplace, wipe glue from brushes and tools, and oil and cover the machines
- Store leather rolled or flat in a cool, dry place away from direct sunlight, store tools in their racks or boxes with blades covered, and keep finished products wrapped in a clean, dry cupboard
A student in Mwanza wants to make a billfold wallet to sell at the local market. Here is how they apply the process:
- Design – A simple two-fold wallet with two card slots and one note compartment
- Measurements – Open size 20 cm × 9 cm, folding to 10 cm × 9 cm; two card slots, each 9.5 cm × 6 cm, one on each half
- Pattern – Make patterns for the outer body (20 cm × 9 cm), the inner piece that forms the note compartment (20 cm × 8.5 cm) and the card slots
- Cutting – Cut leather for the outer body and the card slots, and cotton for the inner piece
- Skiving – Thin the edges that will be stitched and the line where the wallet folds
- Gluing – Glue the card slots onto the inner piece, one on each half
- Stitching – Stitch the card slots to the inner piece along their inner and bottom edges, then glue the inner piece to the outer body and stitch the sides and bottom of the wallet, leaving the top of the note compartment open
- Thread ends – Cut the thread ends close and secure them; a plain billfold needs no fastener
- Finishing – Burnish all edges and polish the leather (any dyeing is done before assembly, so that the lining is not stained)
The student then sets a selling price that covers the cost of the materials and the time spent, and leaves a profit.
Before finishing a project, check the following:
- All stitches are even and no threads are loose
- Fastenings open and close smoothly
- No excess glue is visible on the surface
- Edges are smooth and sealed
- The wallet lies flat when opened
- Using dull cutting tools (causes ragged edges)
- Skiving too much leather (creates weak spots)
- Applying too much glue (makes a messy joint)
- Uneven stitching spacing (looks unprofessional)
A young entrepreneur in Arusha can use the skills learned in this topic to start a small leather workshop making custom wallets and purses. By sourcing local leather from tanneries in Morogoro and selling products at a local market, they can earn income while serving their community. Because a well-finished wallet sells for much more than the cost of its materials, this is a practical skill for self-employment.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret designs
- Select tools and materials
- Select patterns or dies
- Estimate amount of leather required as per design
- Select required accessories and fittings
- Lay patterns on leather and trace
- Lay patterns on fabrics and trace
- Lay patterns on reinforcements
- Cut out leather
- Cut out fabrics
- Cut out reinforcements
- Make hand carton as per design
- Pare the tuning allowances
- Pare the turnover binding allowances
- Glue reinforcements
- Prepare straps
- Mark stitching allowances
- Prepare gussets
- Prepare inside pockets
- Prepare flaps
- Edge bevel and grease
- Mark for stitching
- Skive accessory holders
- Assemble the body by using glue
- Mark for stitching
- Stitch the body
- Cut thread ends
- Spray leather goods
- Finish and pack
- Observe safety
- Clean work place
- Clean tools and equipment
- Store materials
- Store leather products
- Store tools and equipment
Tathmini ya matokeo
A purses and wallets produced conforms to design and required specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Making purses and wallets
Principles: The student should explain the principles of:
- Performing hand stitching
- Performing machine stitching
Theories: The student should explain:
- Uses of purses or wallet
- The importance of precision and attention to details while Making purses and wallets
Circumstantial knowledge:
Detailed knowledge of:
- Safety precautions pertaining to leather goods making
- Safe handling of tools and equipments
- Waste disposal
Swali
What type of wallet folds open with compartments for notes and cards?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado