Mada za sehemu hiiAttaching fittings and accessoriesMada 7
Press buttons are small metal fasteners used to join two pieces of leather or fabric together. A press button has two halves, and each half has two parts, so there are four parts in all:
- Cap and socket (the female half) – the cap shows on the outside of the flap, and its post holds the socket on the inside.
- Stud and post (the male half) – the stud stands up from the body of the article and is held by a post pushed through from behind.
When the stud is pressed into the socket, the two halves snap firmly together and can be opened and closed many times without losing their grip.
Press buttons serve several important purposes:
- Joining two pieces of leather or fabric securely
- Easy opening and closing of bags, pouches, and wallets
- Keeping items safe inside pockets and compartments
- Decorative purpose while also being functional
- Replacing zips where a simple closure is enough
- Ring-spring press buttons – the common type for wallets, pouches and light bags; a wire ring inside the socket grips the stud.
- Heavy-duty press buttons – larger, with a stronger spring, for thick leather, belts and big bags.
- Magnetic press buttons – two halves held together by a magnet; each half has two flat legs that pass through slits and are bent over a washer on the back.
Press buttons come in several sizes and finishes. Choose the size shown in the design, check that the post is long enough for the thickness of your leather, and match the finish to the leather and to the other fittings: for example, brass or antique finishes with brown leather, and nickel or black finishes with black leather.
Before fixing press buttons, gather the following:
- Riveting tool or machine
- Plastic block or scrap wood
- Set of hole punches (matching button size)
- Hammer or wooden mallet
- Press button setter and anvil of the right size (a crew punch cuts long slots and is not used for press buttons)
- Measuring tape and dividers
- Marking tools (leather markers, awl)
- Safety gloves, safety boots and overall or dust coat
- Plastic container for small parts
Step 1: Mark the Position
- Decide where the press button will be placed on your leather item.
- Use a ruler or measuring tape to mark equal distances from the edges.
- Use dividers to ensure both sides are symmetrical.
- Mark the spots with a leather marker or awl.
Step 2: Punch the Holes
- Place the leather on a plastic block or scrap wood.
- Select a round hole punch that is just big enough for the post to pass through. A hole that is too big lets the button work loose.
- Position the punch exactly over your marked spot.
- Strike firmly with the mallet to cut a clean hole.
Example: On a simple leather wallet, the cap half might be centred on the closing flap, 1.5 cm from the flap edge. Fix that half first. Then close the flap and press down on the cap so that it leaves a mark on the body of the wallet. That mark is the centre of the hole for the stud half, so the two halves are sure to line up.
Step 3: Fix the Cap and Socket (Female Half) on the Flap
- Push the post of the cap through the hole from the finished (outer) side of the flap.
- Turn the flap over and rest the cap in the hollow of the anvil, so that its domed face is not flattened.
- Place the socket over the post, open side up.
- Hold the setter upright with its tip in the end of the post.
- Strike with the mallet, or press the handle of the riveting machine, until the end of the post spreads and grips the socket tightly.
Step 4: Fix the Stud and Post (Male Half) on the Body
- Mark and punch the hole in the body of the article, at the point where the cap presses on it when the flap is closed.
- Push the post through the hole from the back (inner) side, so that it stands up on the finished side.
- Rest the flat base of the post on the flat side of the anvil and place the stud over the post.
- Hold the setter upright on the stud.
- Strike firmly until the post spreads inside the stud and holds it tightly.
Step 5: Test the Button
- Press the two parts together to ensure they snap securely.
- Open and close several times to check the grip.
- If a part turns or wobbles, set it again with one or two more blows. Do not strike so hard that the socket is crushed, or it will no longer grip the stud.
- Always wear safety gloves when handling metal parts and tools.
- Use safety boots to protect feet from dropped tools.
- Keep small button parts in a plastic container so they do not scatter.
- Work on a stable workbench and keep your workspace clean.
- Hold punches and setters upright, keep your eyes on the head of the tool, and keep your other fingers clear of the mallet.
- For a small cut or a bruised finger, stop work, clean a cut under running water, press on it with a clean cloth until the bleeding stops, cover it with a plaster and report it.
- Punching holes too large or too small for the button size
- Not aligning both sides before punching
- Striking too hard and crushing the button or marking the leather
- Fixing a half the wrong way round, so that the cap faces inwards or the two halves cannot meet
- Skipping the safety gear
- Wipe marker lines and fingerprints off the leather and the buttons with a soft, slightly damp cloth, then dry them.
- Brush leather plugs out of the punches, wipe the setter, anvil and riveting machine, and return them to their rack or box. A light film of oil keeps steel tools from rusting.
- Keep unused press buttons sorted by size and finish in labelled plastic containers with lids, with all four parts of each set together.
- Store leather and finished articles flat, in a dry place away from direct sun.
- Put leather plugs, small offcuts and spoiled buttons in the waste bin, and keep larger offcuts for practice.
Fixing press buttons involves marking the position, punching clean holes, and using the right tools to fix the cap and socket on one piece and the stud and post on the other. Always check alignment before fixing and test the button after installation. With practice, you will be able to attach press buttons neatly and firmly on any leather good you make.
In Tanzania, many tailors and leather crafters in local markets fix press buttons on bags, wallets, and belts using these same techniques. For example, a shoemaker in Arusha can earn a small fee each time they replace a broken press button on a customer's leather bag, demonstrating how this skill has practical value in small businesses and everyday repairs.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select the right materials
- Select appropriate tools and equipment
- Mark leather pieces according to patterns and designs
- Select the appropriate press buttons according to designs
- Punch leather pieces correctly
- Attach press buttons correctly
- Match press buttons with leather colours
- Clean material thoroughly
- Observe safety
- Clean tools and equipment thoroughly
- Store materials correctly
- Store tools and equipment correctly
Tathmini ya matokeo
Press buttons are fixed to their position properly
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should correctly explain how to:
- Mark press buttons positions
- Punch fixing holes
- Attach press buttons
- Clean finished leather goods and footwear
Principles: The student should correctly explain the principles of attaching press buttons
Theories: The student should correctly explain
- The types of press buttons
- The use of different types of leather punches
- How to match leather with press buttons
- The types of tools for attaching press buttons
- The importance of precise and detailed work while attaching press buttons
Circumstantial knowledge:
Detailed knowledge of:
- Safety precautions when attaching press buttons
- Safe handling of tools and equipment
- First aid
- Waste disposal
Swali
What are the four parts of a press button called?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado