Mada za sehemu hiiBurnishing leatherMada 3
- Treating leather
- Burnishing leather
- Cutting leather
Cutting leather is one of the most important skills in leather craft. A well-cut piece of leather ensures that the finished product looks professional, fits together properly, and lasts long. Poor cutting leads to wasted material, weak products, and uneven seams. Every piece of leather you cut should be done with care and precision.
A hide is not the same all over. Where a part is cut from, and in which direction, decides how strong it will be.
| Part of the hide | Character | Typical use |
|---|---|---|
| Butt (the back, on both sides of the backbone) | Thickest, with tight fibres; strongest and stretches least | Belts, straps, soles and parts that carry strain |
| Shoulder | Fairly strong and flexible; may show growth wrinkles | Bags, straps, shoe uppers |
| Belly and flanks | Thin, with loose fibres; stretches easily and is weakest | Linings, pockets, small hidden parts |
| Neck and legs (shanks) | Uneven thickness, wrinkled | Small parts and reinforcements |
- Fibre direction and stretch: leather stretches least along the line of the backbone and most across it, towards the belly. Pull the leather gently in two directions to feel the tight side and the stretching side. Cut belts and straps with their length along the tight direction so that they do not stretch out of shape.
- Tensile strength is the pulling force leather can take before it tears. It is highest in the butt and lowest in the belly. A nick or a ragged edge is a weak point where a tear can start, which is one reason cuts must be clean.
- Quality: full-grain leather, with its natural surface intact, is the strongest. Corrected-grain leather has had its surface sanded, and split leather, taken from the lower layers, is weaker. Before cutting, look for scars, holes, tick marks, brand marks and loose grain. Cut around these flaws, or place them where they will not show or carry strain.
Before cutting leather, gather the right tools:
- Cutting knife — for hand cutting straight and curved lines
- Cutting dies — steel cutters made in the shape of the part, for repeated shapes
- Cutting machine — hydraulic or clicker press for mass production
- Scissors — useful for thin leather and thread cutting
- Workbench — stable surface for cutting
- Cutting mat or board — protects the workbench and keeps the knife sharp
- Safety gloves — protect hands from cuts
- Safety boots — protect feet from dropped tools
- Dust coat — protects clothing
- Sponge and plastic container of clean water — for wiping dust and dirt off the leather before marking
Leather work involves sharp tools. Always follow these safety rules:
- Wear safety gloves when handling cutting knives
- Keep fingers away from the blade path
- Cut away from your body
- Secure the leather firmly on the workbench before cutting
- Keep the workshop floor clean to avoid tripping
- Store knives in their sheaths when not in use
Step 1: Prepare the Work Area
Choose leather of the right type and thickness for the product. Wipe it with a damp, well-squeezed sponge to remove dust, let the surface dry, and check it for flaws. Place the leather on a clean cutting board on a flat workbench. Make sure the leather is laid flat without folds or wrinkles. Secure it with a clamp or weights if needed.
Step 2: Mark the Cutting Line
Use a pencil, chalk, or marking knife to draw the outline of the shape you want to cut. For straight cuts, use a ruler as a guide. For curved cuts, use a template or draw freehand carefully.
Step 3: Position the Knife
Hold the cutting knife firmly with your dominant hand. Rest the blade on the starting point of your marked line. Keep the blade upright so that the cut edge is square, not sloping. For curved cuts, use the point of the blade, cut in short strokes and turn the leather rather than leaning the knife.
Step 4: Make the Cut
First decide how much pressure is needed: thin, soft leather needs light pressure, while thick, firm leather needs more. Test on a scrap of the same leather. Apply steady downward pressure and move the knife smoothly along the cutting line, keeping your other hand behind the blade. For thick leather, make several shallow passes rather than one deep cut. This gives cleaner results and protects your hands, because a knife that is forced is the one that slips.
Step 5: Check the Cut
After cutting, compare the piece to your template. The edges should be clean and follow your marked line. If any spots need trimming, correct them carefully.
For repeated production of the same shape:
- Position the die on the leather where you want to cut
- Align the die properly using guides or markings
- Activate the cutting machine to press the die through the leather
- Remove the cut piece and check its quality
Set the pressure of the machine so that the die just cuts through the leather and lightly marks the cutting board. Too little pressure leaves the piece hanging by uncut fibres; too much drives the die into the board and blunts it. Test on scrap leather first. Keep both hands clear of the press head, use the guards and two-hand controls fitted to the machine, and let only one person operate it at a time.
Dies are useful when making multiple items of the same size, such as shoe soles or wallet pockets.
- Cutting too fast — leads to uneven edges
- Using a dull blade — tears leather instead of cutting it cleanly
- Not securing the leather — causes the piece to shift and ruin the cut
- Cutting freehand without marking — produces inaccurate shapes
- Ignoring the fibre direction — a part cut across the tight direction stretches out of shape in use
- Sort the offcuts: keep larger pieces for small items such as key holders and straps, and put useless scraps in the waste bin
- Do not burn leather scraps; the smoke is harmful
- Wrap used blades in paper or put them in a closed tin before throwing them away
- Wipe the knife, dies and cutting board clean, cover the blades and return the tools to their places
- Roll the remaining leather loosely, never fold it, and store it in a dry place
A student wants to cut a rectangular piece of leather measuring 15 cm by 10 cm for a cardholder. The student:
- Measures and marks 15 cm length and 10 cm width on the leather using a ruler and pencil
- Checks that all four corners are at right angles
- Places a steel ruler along one long edge as a guide
- Holds the knife vertical and cuts along the line with steady pressure
- Repeats for the opposite long edge
- Cuts the two short edges
- Checks that all sides are straight and the dimensions are correct
If the student cuts the first side 1 cm off, the cardholder will be too small. Precision at the cutting stage saves time and material later.
- Always measure twice before cutting once
- Keep your cutting tools sharp and in good condition
- Wear protective equipment at all times
- Practise on scrap leather before cutting expensive pieces
- Good cutting technique reduces waste and improves the quality of finished products
A leather craftsman in Arusha who makes belts and bags uses cutting skills to cut leather strips from a whole hide. By measuring carefully and cutting straight, he minimises waste and maximises profit. For example, if he wastes just 5 cm of leather per belt due to poor cutting, over 100 belts he loses 5 metres of strap, enough leather for several more belts. Good cutting technique directly affects his income.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select materials
- Select tools and equipment
- Prepare leather
- Determine the required pressure
- Perform cutting of leather
Tathmini ya matokeo
Leather is cut according to the required specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to: Cut leather with a good cut
Principles: The student should explain the principles of:
- Cutting leather
Theories: The student should explain:
- The topographical structure of leather
- The fiber directions of leather
- Specific uses of different parts of leathers
- Quality of different types of leather
- Tensile strength
- The fiber structure and direction of leather
- The tension and the stretching side of leather
- The importance of precise and detailed work while cutting leather
Circumstantial knowledge:
Detailed knowledge of:
- Safety handling of materials, work tools, equipment and machinery
- Safety and handling of work tools, equipment and machines
- Waste disposal
Swali
Which part of a hide is the thickest and strongest, making it suitable for belts and soles?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado