Mada za sehemu hiiOperating slaughter hall equipmentMada 3
- Operating hoisting device
- Operating feet and head dehairing machine
- Operating stomach/tripe cleaning machine
A feet and head dehairing machine is a piece of equipment used in slaughterhouses to remove hair from the feet (trotters) and head of animals after they have been bled. The machine uses hot water to loosen the hair, making it easy to remove without damaging the skin. This machine is faster and more hygienic than removing hair manually with knives.
Before using the dehairing machine, the feet and head must be scalded. Scalding is the process of immersing the feet or head in hot water (about 60°C) for a short time. This hot water loosens the hair follicles, making the dehairing process much easier and faster. Without proper scalding, the hair would be difficult to remove and could damage the skin.
- It is easy to operate
- It works faster than manual dehairing
- It produces clean products without damaging the skin
- It is safe to operate
- It is suitable for large-scale production in abattoirs
Before operating the machine, gather all required items:
- Dehairing machine
- Aluminium table
- Knives
- Sanitary agents (cleaning chemicals)
- Bled feet and head from cattle or pigs
- Boiling water (about 65°C)
- Safety gear: cap or helmet, gumboots, overall
Follow these steps carefully to operate the feet and head dehairing machine:
Step 1: Prepare Tools and Equipment
Gather all tools, equipment and materials needed for the operation. Make sure the dehairing machine is clean and in good working condition. Place the aluminium table near the machine to receive the cleaned feet and head.
Step 2: Boil Scalding Water
Boil water to a temperature of about 65°C. The correct temperature is important because water that is too hot can damage the skin, while water that is too cold will not loosen the hair properly.
Step 3: Immerse Feet or Head and Add Hot Water
Place the feet or head inside the dehairing machine chamber. Close the lid or cover. Pour the hot scalding water into the machine. The hot water will soak the feet or head and loosen the hair.
Step 4: Start the Machine
Press the 'start' button on the control panel to run the dehairing machine. The machine will rotate or agitate the feet/head inside, helping to remove the loose hair from the skin.
Step 5: Remove Cleaned Feet or Head
When the dehairing process is complete, open the side door of the machine manually. Carefully remove the cleaned feet or head and place them on the aluminium table. Inspect them to ensure all hair has been removed.
Step 6: Clean the Machine
After use, clean the dehairing machine, tools and work area using sanitary agents. This ensures hygiene and prepares the equipment for the next use.
A slaughterhouse in Dodoma receives 20 cattle for processing. After bleeding, the workers need to clean the feet and heads. Instead of using knives to manually remove hair (which takes a long time and can damage the skin), they use the dehairing machine. They boil water to 65°C, place the feet inside the machine, add the hot water, and start the machine. Within a few minutes, all 20 sets of feet are cleaned and ready for the next processing stage. This method is faster and produces better quality products.
- Always wear safety gear (gumboots, overall, cap) when operating the machine
- Be careful when pouring hot water to avoid burns
- Ensure the machine is switched off before opening the side door
- Keep the work area clean to prevent contamination of the meat
In Tanzania, many slaughterhouses and abattoirs in cities like Dar es Salaam, Arusha and Mwanza use dehairing machines to process beef efficiently. A local butcher or meat vendor who understands how to operate this machine can process more animals in less time, supplying clean trotters (feet) and heads to markets and restaurants, which are popular dishes in Tanzanian cuisine such as kipata (grilled meat) and ugali with meat.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to:
- Organize work tools, equipment and safety gear
- Bring the feet and heads
- Identify parts of the feet and head dehairing machine
- Operating feet and head
- Keep different records
Tathmini ya matokeo
Feet and head dehairing machine is correctly operated
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The students should explain how to operate feet and head dehairing machine
Principles: The students must explain principles scalding and dehairing processes
Theories: The explain:
- How to handle the feet and head dehairing machine
- Procedures of operating feet and head dehairing
- Cleaning after the uses
- Maintaining the machine
Circumstantial knowledge: knowledge about: On pressure, and other machine parameters
Swali
What is the main purpose of a feet and head dehairing machine in a slaughterhouse?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado