Follow these steps carefully to operate a plucking machine:
Step 1: Prepare Tools and Equipment
Select and prepare all tools, equipment, and materials needed for the plucking operation. Ensure everything is clean and in good working condition.
Step 2: Boil Water
Boil water to a temperature between 65°C and 80°C. The correct water temperature is important because it helps loosen the feathers from the skin without damaging the chicken meat.
3. Add Scalding Water to the Machine
Pour the hot scalding water (65°C – 80°C) into the plucking machine. This hot water prepares the chickens for easy feather removal.
4. Place Chickens in the Machine
Put the bled (slaughtered) chickens into the plucking machine drum. Ensure the birds are properly loaded into the machine.
5. Switch On the Machine
Turn on the plucking machine and allow it to operate for about 30 seconds. The rotating drum with rubber fingers will start grabbing and pulling out the feathers.
6. Open Water Faucet
Turn on or open the water faucet so that the loose feathers and ginger skin are washed out of the machine during the plucking process.
7. Remove and Rinse Chickens
Remove the plucked chickens from machine and rinse them on the tray or aluminum table to clean any remaining feathers or debris.