Follow these steps carefully to maintain your grinder/mincer machine:
1. Disassemble the Machine
Before cleaning, disconnect the machine from the power supply. Use mincer spanners to carefully disassemble the grinder, removing the hopper, feed screw, blades, and plates. Lay all parts on a clean surface.
2. Soak Removable Parts
Place all removable parts (blades, plates, feed screw, hopper) in a basin of warm soapy water. Allow them to soak for several minutes to loosen stuck meat particles and fat.
3. Scrub and Rinse
Using appropriate brushes, scrub all soaked parts thoroughly to remove all meat residues. Iron brushes work well for tough buildup, while soft brushes are suitable for blade surfaces. Rinse all parts with clean water until no soap residue remains.
4. Dry All Parts
Wipe each part dry using a clean, dry cloth. Moisture can cause rusting, so ensure all components are completely dry before reassembling.
5. Lubricate Moving Parts
Apply food-grade lubricant to moving parts such as the feed screw and bearing points. Lubrication reduces friction and ensures smooth operation during the next use.
6. Inspect and Replace Worn Parts
Check all parts for signs of wear, damage, or dull blades. If blades are worn or damaged, replace them. Also check seals and gaskets, replacing any that are cracked or worn out.
7. Reassemble the Machine
Put all parts back together correctly, ensuring blades are properly aligned and securely fastened. Follow the manufacturer's instructions for proper assembly.
8. Store Properly
Store the cleaned and reassembled mincer in a dry, clean area away from moisture and dirt. This prevents rusting and keeps the machine ready for next use.