Mada za sehemu hiiMaking meat cutsMada 6
- Producing beef cuts
- Producing lamb/goat cuts
- Producing pig cuts
- Producing poultry cuts
- Producing minced meat
- Making stock
Introduction
When we buy meat from the market or a butcher shop, the animal carcass has already been divided into smaller, usable pieces called cuts. Knowing how to identify and produce different lamb and goat cuts is an essential skill in meat processing, as it determines how the meat is priced, cooked, and presented to consumers.
Lamb refers to the meat from a young sheep, typically less than 12 months old. The meat is tender and has a mild flavor.
Chevon is the term used for goat meat, regardless of the goat's age. When the goat is young (under 12 months), the meat may also be called kid goat or cabrito.
A meat cut is a portion of the carcass that has been separated from the rest of the body through cutting or butchering. Each cut has specific characteristics based on which part of the animal it comes from.
During the brainstorming activity, students should define and describe the following main categories of cuts:
- Primary cuts: Large sections obtained from the initial division of the carcass (e.g., shoulder, leg, loin, rib, neck, breast, and shank)
- Secondary cuts: Smaller portions obtained from further dividing primary cuts (e.g., chops, stew meat, cubes, and ground meat)
The exact names and number of cuts may vary between different countries, but the basic principles remain the same.
Equipment Needed
Before starting, ensure the following tools and safety gear are available:
- Band saw or hand saw
- De-boning knives
- Weighing scale
- Steel sharpener
- Iron gloves and iron apron
- White lab coat, white trouser, cap, and mask
- Clog shoes
- Dust bins for waste
Step-by-Step Procedure
-
Prepare the workspace — Clean and sanitize all surfaces and tools. Put on your safety gear (gloves, apron, lab coat, cap, and mask).
-
Inspect the carcass — Check the lamb or goat carcass to identify the major anatomical parts (shoulder, rib, loin, leg, neck, breast, and shank).
-
Sharpen your tools — Use the steel sharpener to ensure knives are properly sharpened before cutting. Sharp tools make clean cuts and reduce the risk of injury.
-
Make primary cuts — Using a saw or knife, divide the carcass into primary cuts following the natural separations between bones and muscles. Common divisions include:
- Separating the shoulder from the rib section
- Cutting between the rib and loin
- Detaching the leg from the loin
- Separating the neck and breast from the shoulder
-
Produce secondary cuts — Further divide primary cuts into smaller, market-ready portions:
- Cut the leg into leg chops or roasts
- Cut the loin into loin chops or tenderloin
- Cut the shoulder into shoulder chops or stew meat
- Slice the rib into rib chops
-
Weigh each cut — Use the weighing scale to determine the weight of each cut. This is important for pricing and packaging.
-
Package and label — Wrap cuts properly for sale or storage. Label with the cut name and weight.
-
Clean up — Dispose of waste in dust bins and sanitize all equipment after use.
A butcher in Arusha received a whole lamb carcass weighing 18 kg. After slaughtering and initial dressing, the carcass was divided into the following primary cuts:
| Primary Cut | Weight (kg) |
|---|---|
| Shoulder | 4.0 |
| Rib | 3.5 |
| Loin | 2.5 |
| Leg | 4.5 |
| Neck | 1.5 |
| Breast | 1.0 |
| Shank | 1.0 |
Total: 18.0 kg
The butcher then further divided the loin (2.5 kg) into 10 loin chops. Each chop weighs approximately 250 grams (0.25 kg). These chops were sold at TZS 8,000 each, earning TZS 80,000 from the loin portion alone.
This example shows how knowing how to produce different cuts helps in pricing, packaging, and selling meat profitably.
- Always wear protective gear when handling sharp tools and raw meat.
- Keep knives sharp — dull knives slip and cause injuries.
- Work on clean, sanitized surfaces to prevent contamination.
- Dispose of waste properly to maintain hygiene.
- Keep hands and fingers away from the path of saws and knives.
In Tanzania, goat and sheep meat (nyama ya mbuzi na kondoo) are popular for celebrations such as Eid, Christmas, and traditional ceremonies. A student who masters producing lamb and goat cuts can work as a butcher, open a meat shop, or supply properly cut meat to restaurants and hotels. For instance, a young entrepreneur in Mwanza could buy whole goats at TZS 150,000, cut them into premium chops and stew meat, and sell them for a profit, applying this skill to build a reliable small business.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to:
- Prepare working place
- Organize work tools, equipment and safety gear
- Prepare chevon and lamb carcasses
- Produce chevon lamb cutlets
- Observe health and safety precautions
- Clean tools, equipment and workplace.
- Store tools and equipment
Tathmini ya matokeo
Lamb /chevon prepared as per the required market standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The students should explain how to produce lamb / chevon cuts
Principles: The students should explain the principles of making lamb /chevon cuts.
Theories: The students should explain:-
- Importance of making lamb /chevon cuts
- Steps involved in production of lamb
- Traditional lamb cutting
- Culinary uses of lamb cuts
- Uses of trimmings
Circumstantial knowledge:
Detailed knowledge about:
- Cuts demanded versus
- Losses due to cutting and deboning process
- Safe handling of tools and equipment
Swali
What is the correct definition of lamb according to the lesson?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado