Mada za sehemu hiiManaging bee hive and apiaryMada 6
A beehive is an enclosed structure where honeybees live, raise their young, and store food. It can be a natural nest or an artificial structure created by humans to house a bee colony for honey production and pollination purposes. Understanding how to make beehives is an essential skill for any beekeeper in Tanzania.
Beehives serve several important purposes:
- Honey production – Beehives provide a controlled environment for bees to produce honey, which is a valuable food product and source of income
- Pollination – Bees kept in hives help pollinate crops, enhancing food production for farmers
- Biodiversity – Managed hives support ecosystem health and plant diversity
- Other products – Beehives are also used to produce beeswax, bee pollen, royal jelly, and bee venom
- Research and education – Hives allow beekeepers to observe bee behavior and monitor colony health
There are several types of beehives used in Tanzania and around the world:
1. Langstroth Hive
The most widely used modern hive with removable frames. Benefits include easy honey harvesting, higher honey yield, and standardisation that allows frame interchangeability.
2. Top-Bar Hive
The oldest and most common hive style globally. Features individual bars across the top where bees build comb naturally. It is easier and cheaper to make than frame hives, making it popular among small-scale Tanzanian farmers. There are two main styles: Kenyan top bar hive and Tanzanian top bar hive.
3. Warre Hive
A vertical, top-opening hive designed to mimic natural tree nest conditions. Requires minimal management and provides good insulation.
4. Flow Hive
An innovative design that allows honey extraction directly without removing frames, minimizing disturbance to bees.
5. Observation Hive
A transparent hive used for education and research to observe bee behavior without disturbing the colony.
6. Log Hive
Made from hollowed tree trunks. Provides good insulation and is durable, affordable, and easily available in rural areas.
Before making a beehive, gather these tools and materials:
Tools:
- Saw (hand saw, jigsaw, or circular saw)
- Drill and drill bits
- Hammer
- Screwdriver or screw gun
- Tape measure and pencil
- Clamps
- Sandpaper
Materials:
- Untreated processed wood (pine, cypress, or redwood)
- Plywood (1/4 inch)
- Wood glue
- Screws (1 1/4" and 1 1/2")
- Non-toxic, bee-safe paint or varnish (for finishing)
Protective Gear:
- Overall
- Safety boots
A complete beehive consists of several parts:
- Bottom board – The floor of the hive, usually tilted slightly forward to prevent rainwater entry
- Hive body/boxes (supers) – Boxes for brood rearing and honey storage; deep boxes for brood (9 5/8") and medium boxes for honey (6 5/8")
- Frames – Removable wooden structures inside boxes where bees build honeycomb; properly spaced at 3/8" ("bee space")
- Inner cover – Provides ventilation with a hole in the centre
- Outer cover (telescoping cover) – The roof protecting bees from weather
- Entrance reducer – Controls bee access and ventilation
- Hive stand – Elevates hive off the ground for air circulation
Follow these steps to make a standard Langstroth hive:
Step 1: Prepare Tools and Materials
Gather all tools (saw, drill, hammer, screwdriver, tape measure) and materials (wood boards, plywood, screws).
Step 2: Design and Plan
Plan the dimensions:
- Brood box: 9.5" deep, 16.25" wide, 19.875" long
- Honey supers: 6.25" deep
- Frames: 19" long and 9.125" tall
Step 3: Cut the Wood
- Cut two panels for front and back (height × width)
- Cut two panels for sides (height × length)
- Cut bottom panel to fit the box
- Cut top and inner cover panels
- Cut frame components (top bar, bottom bar, side rails)
Step 4: Assemble the Hive Components
- Join front, back, and side panels into a rectangular box using screws
- Attach bottom panel if not using a separate bottom board
- Cut bee space grooves (about 1/4 inch) along edges
- Construct frames by joining top, bottom, and side rails
- Install foundation in frames if desired
Step 5: Make the Bottom Board
Cut bottom board slightly larger than hive body for overhang. Install entrance reducer if needed.
Step 6: Make the Covers
Construct inner cover and outer cover from plywood. Ensure outer cover fits securely and can be covered with aluminium for waterproofing.
Step 7: Finishing
Sand all surfaces to remove splinters. Apply non-toxic, bee-safe paint or varnish to protect from elements. Never use toxic chemicals as they can harm bees.
Step 8: Installation and Setup
- Place hive in a sunny, wind-protected location
- Ensure hive is level and stable
- Position bottom board to provide bee entrance
Top-bar hives are popular in Tanzania because they are simpler and cheaper to construct.
Step 1: Prepare Materials and Tools
Use 2"×4" boards for frame and legs, plywood for hive body, untreated wood, screws or nails, and optional wire mesh for ventilation.
Step 2: Design and Plan
Typical dimensions: 4 feet long, 12–16 inches wide, 8–10 inches deep. Top bars: 1.5–2 inches wide, 16–18 inches long.
Step 3: Cut the Wood
- Two panels for front and back (height × length)
- Two panels for sides (width × height)
- Bottom panel to fit
- Wooden strips for top bars
- Panels for roof (flat or sloped)
Step 4: Assemble the Hive Body
Join panels using screws or nails and wood glue. Ensure corners are square. Attach bottom panel snugly to prevent pest entry. Add ventilation holes if needed.
Step 5: Prepare and Install Top Bars
Sand top bars smooth. Add a small wedge or comb-guide to help bees start building comb. Space 8–12 bars evenly inside the hive body.
Step 6: Add the Roof
Attach flat or sloped roof securely with overhang to protect from rain.
Step 7: Finishing Touches
Sand all surfaces. Apply non-toxic paint or varnish for weather-proofing. Check for gaps and seal to make hive airtight and secure.
When making beehives, always:
- Wear protective clothing (overall and safety boots)
- Use tools carefully and according to manufacturer instructions
- Work in a well-ventilated area
- Handle wood and tools properly to avoid injuries
In Tanzania, a small-scale farmer in regions like Manyara or Singida can construct a top-bar hive using locally available timber and tools to start beekeeping. For example, a farmer might spend approximately TZS 50,000–80,000 on materials to build one hive, then harvest and sell honey at local markets for additional income, supporting household food security and earning money for school fees and other family needs.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select work equipment, tools, utensils and safety gears
- Identify types of bee hives
- Fabricate beehives
- Keep different records
- Clean tools, equipment used and workplace
Tathmini ya matokeo
Fabricated beehive produced according to the set standards of bee keeping.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should be able to explain how to make beehive
Principles: The student should state the principles related to making bee hive
Theories: The student should :
- Highlight the importance of bee hive
- Identify types of bee hive
- List down materials required to fabricate beehive
- Outline the components of beehive
- Elaborate how to design and fabricate beehives
Circumstantial knowledge: Detailed knowledge about
- Environmental conservation in relation to bee keeping
Swali
Which type of beehive is the most widely used modern hive with removable frames?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado